Altus Metrum announces AltOS version 1.9.13
This release contains a couple of important firmware changes and users
with TeleMetrum, TeleMega and EasyMotor boards are strongly encouraged
to update.
AltOS Changes:
* Add option to beep max height in feet after landing
* Fix APRS reports to be sent at the correct time and spacing.
* Fix possible barometric sensor communication failure when
the CPU is busy talking to the radio at the same time. This
would cause loss of telemetry and failure to track the state
of the rocket during flight. This was aggravated by the APRS
reports getting sent more often than they should.
* Change EasyMotor v3 code to base logging on motor pressure
rather than the accelerometer. This allows use of EasyMotor
v3 in a static test stand, and allows EasyMotor to be
mounted in any orientation in an airframe.
AltosUI Changes:
* Add support for configuring the units used to report height
after landing on the beeper.
Read more about AltOS here:
https://altusmetrum.org/AltOS/
_______________________________________________
altusmetrum mailing list -- altusmetrum@lists.gag.com
To unsubscribe send an email to altusmetrum-le...@lists.gag.com
