I keep getting reports like the attached running amanda on aix 4.3.3. I've setup a samll (3 gig) holding disk, and configured amanda to use a 1gig chunk size (the filesystem is not large file enabled, which means a 2-gig limit on aix). The filesystems on fasttrans are using aix backup, but the auslog one is using gnu tar (it's a redhat 7.1 system). I'm obviously missing something here. the root on auslog is about 2.8 gigs. Writing to a 20-gig 8mm drive. --
These dumps were to tape DailySet105. The next tape Amanda expects to use is: a new tape. FAILURE AND STRANGE DUMP SUMMARY: fasttrans /egate lev 1 FAILED ["data write: File too large"] fasttrans /u01 lev 1 FAILED ["data write: File too large"] fasttrans /u02 lev 1 FAILED ["data write: File too large"] auslog.fas / lev 0 FAILED ["data write: File too large"] STATISTICS: Total Full Daily -------- -------- -------- Estimate Time (hrs:min) 0:10 Run Time (hrs:min) 1:24 Dump Time (hrs:min) 0:01 0:00 0:01 Output Size (meg) 29.7 0.0 29.7 Original Size (meg) 33.5 0.0 33.5 Avg Compressed Size (%) 20.5 -- 20.5 (level:#disks ...) Filesystems Dumped 6 0 6 (1:5 2:1) Avg Dump Rate (k/s) 493.6 -- 493.6 Tape Time (hrs:min) 0:00 0:00 0:00 Tape Size (meg) 29.8 0.0 29.8 Tape Used (%) 0.2 0.0 0.2 (level:#disks ...) Filesystems Taped 6 0 6 (1:5 2:1) Avg Tp Write Rate (k/s) 1288.1 -- 1288.1 FAILED AND STRANGE DUMP DETAILS: /-- fasttrans /egate lev 1 FAILED ["data write: File too large"] sendbackup: start [fasttrans:/egate level 1] sendbackup: info BACKUP=/usr/sbin/backup sendbackup: info RECOVER_CMD=/usr/sbin/restore -f... - sendbackup: info end | backup: Date of this level 1 backup: Wed Jul 18 10:01:52 2001 | backup: Date of last level 0 backup: the epoch | backup: Backing up /dev/rapplv (/egate) to standard output | backup: File system still mounted, inconsistent data possible | backup: Mapping (Pass I) [regular files] | backup: Mapping (Pass II) [directories] | backup: estimated 1111352 1k blocks. | backup: Backing up (Pass III) [directories] | backup: Backing up (Pass IV) [regular files] \-------- /-- fasttrans /u01 lev 1 FAILED ["data write: File too large"] sendbackup: start [fasttrans:/u01 level 1] sendbackup: info BACKUP=/usr/sbin/backup sendbackup: info RECOVER_CMD=/usr/sbin/restore -f... - sendbackup: info end | backup: Date of this level 1 backup: Wed Jul 18 10:05:34 2001 | backup: Date of last level 0 backup: the epoch | backup: Backing up /dev/rlv02 (/u01) to standard output | backup: File system still mounted, inconsistent data possible | backup: Mapping (Pass I) [regular files] | backup: Mapping (Pass II) [directories] | backup: estimated 1400484 1k blocks. | backup: Backing up (Pass III) [directories] | backup: Backing up (Pass IV) [regular files] \-------- /-- fasttrans /u02 lev 1 FAILED ["data write: File too large"] sendbackup: start [fasttrans:/u02 level 1] sendbackup: info BACKUP=/usr/sbin/backup sendbackup: info RECOVER_CMD=/usr/sbin/restore -f... - sendbackup: info end | backup: Date of this level 1 backup: Wed Jul 18 10:07:46 2001 | backup: Date of last level 0 backup: the epoch | backup: Backing up /dev/rlv03 (/u02) to standard output | backup: File system still mounted, inconsistent data possible | backup: Mapping (Pass I) [regular files] | backup: Mapping (Pass II) [directories] | backup: estimated 1566870 1k blocks. | backup: Backing up (Pass III) [directories] | backup: Backing up (Pass IV) [regular files] \-------- /-- auslog.fas / lev 0 FAILED ["data write: File too large"] sendbackup: start [auslog.fast.medic.com:/ level 0] sendbackup: info BACKUP=/bin/tar sendbackup: info RECOVER_CMD=/usr/bin/gzip -dc |/bin/tar -f... - sendbackup: info COMPRESS_SUFFIX=.gz sendbackup: info end | gtar: ./dev/gpmctl: socket ignored | gtar: ./dev/log: socket ignored | gtar: ./tmp/afterstep-500.DISPLAY=\:1.0: socket ignored | gtar: ./tmp/afterstep-500.DISPLAY=\:2.0: socket ignored \-------- NOTES: planner: Adding new disk auslog.fast.medic.com:/. taper: tape DailySet105 kb 30560 fm 6 [OK] DUMP SUMMARY: DUMPER STATS TAPER STATS HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s -------------------------- --------------------------------- ------------ auslog.fast. / 0 FAILED --------------------------------------- auslog.fast. /boot 1 10 32 320.0 0:01 25.5 0:07 8.9 auslog.fast. /var 2 4990 992 19.9 0:07 147.8 0:011032.0 fasttrans / 1 576 576 -- 0:07 85.2 0:01 663.2 fasttrans /egate 1 FAILED --------------------------------------- fasttrans /home 1 13760 13760 -- 0:101335.1 0:081696.2 fasttrans /u01 1 FAILED --------------------------------------- fasttrans /u02 1 FAILED --------------------------------------- fasttrans /usr 1 9088 9088 -- 0:28 322.1 0:032614.1 fasttrans /var 1 5920 5920 -- 0:08 715.5 0:031987.4 (brought to you by Amanda version 2.4.2p2)