>... I thought >amanda would backup on the holding disk >and I can write it later with amflush on the >tape?
That's correct. If there is no tape, Amanda will write backups into the holding disk. It will only write incrementals unless you change the "reserve" paramenter in amanda.conf (e.g. set it to zero). However ... >WARNING: skipping tape test because amdump or amflush seem to be running >WARNING: if they are not, you must run amcleanup The above has nothing to do with not writing into the holding disk. This says Amanda thinks there is another amdump/amflush still running. If this is true, you cannot run amcheck (or amdump/amflush) until the first one finishes. If it's not true, it even tells you what to do -- run amcleanup. At one point in the distant past, amcleanup failed to do its job in one set of circumstances. If you run it and amcheck continues to think amdump/amflush are still running, let me know and I'll get you a better version of amcleanup. >Thanks Tom John R. Jackson, Technical Software Specialist, [EMAIL PROTECTED]