On Fri, 17 May 2002 at 6:29pm, Alexander Belik wrote > These dumps were to tape AUTH8. > *** A TAPE ERROR OCCURRED: [[writing file: No space left on device]]. > Some dumps may have been left in the holding disk. > Run amflush to flush them to tape. > The next tape Amanda expects to use is: AUTH1. > *snip*
> Tape Time (hrs:min) 0:53 0:48 0:06 > Tape Size (meg) 4013.4 3724.1 289.4 > Tape Used (%) 18.3 16.9 1.4 (level:#disks ...) > Filesystems Taped 11 1 10 (1:7 2:1 3:2) > Avg Tp Write Rate (k/s) 1282.2 1331.8 867.0 > [skip] > > Only 15Gb???? Why OUT OF SPACE? No erros!! > in amanda.conf: Actually, only 4GB made it tape, as indicated above. There probably was some sort of tape error, which amanda interpreted as an out of space error. Look in your system logs for something relating to the tape drive at around the time the backup failed. Also, make sure that hardware compression is *off*, since you are using software compression. Trying to compress already compressed data is Bad. -- Joshua Baker-LePain Department of Biomedical Engineering Duke University