Amanda uses the full path to all the backup/restore programs that it was configured with (and are fixed at compile time). So if Amanda was built with your dump program as /usr/sbin/dump. but now it is /sbin/dump or /usr/local/bin/dump, then you will get the 'program not available' error even though 'dump' is somewhere in the Amanda user's path. (Disclaimer: I'm a 'tar' user, and am assuming Amanda deals with ufsdump, vxdump, and other variants of dump in a similar way to the way it finds GNU tar.) Somewhere near the beginning of /tmp/amanda/amandad.*.debug you can find the full command path that Amanda is trying to run. You can then either make a link from there to the real program, or (probably better for the long term) rebuild Amanda with the correct path.
Good luck, Frank --On Saturday, June 01, 2002 14:08:30 -0400 Kaan Saldiraner <[EMAIL PROTECTED]> wrote: > Hello, > > Thanks for the responce .. I ran this command while su - to amanda > > export PATH=$PATH:/usr/sbin/:/usr/local/bin:/sbin:/bin > > Now amanda user can infact run the dump and restore without doing /sbin/dump > ..etc. > > But when i do amcheck on my server It is still giving me the same error. > > DUMP Porgram not available > RESTORE program not available > > Thanks, > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Sent: Saturday, June 01, 2002 8:07 AM > To: Kaan Saldiraner > Subject: RE: Dump Program Not available > > > It sounds like your environment for the amanda user does not have the path > to > the dump command. "su -" to the amanda user account and see if you can run > dump from the command line. If not you need to add it to the path for the > amanda user. > > Just my 2 cents. > > Wade > > > >> Hello, >> >> Thanks for the response but i think that the solution that you have gave > me >> is for something else... Thanks for your response .. >> My problem is that amanda doesn't see that the machine has Dump already.. >> Maybe permission problem???? >> >> -----Original Message----- >> From: Gene Heskett [mailto:[EMAIL PROTECTED]] >> Sent: Friday, May 31, 2002 8:37 PM >> To: Kaan Saldiraner; [EMAIL PROTECTED] >> Subject: Re: Dump Program Not available >> >> >> On Friday 31 May 2002 05:21 pm, Kaan Saldiraner wrote: >> > Hello, >> > >> > I just installed a client and when i do amcheck for the Server it >> > gives me this error >> > >> > ERROR: machine.domain.com: [DUMP program not available] >> > ERROR: machine.domain.com: [RESTORE program not available] >> > >> > I rpmed the dump program and recompiled amanda on the client after >> > and still the same error >> > >> > Any ideas?? >> > >> > Thanks >> > >> > Kaan Saldiraner >> > Steltor Inc. >> > (514)733-8500 x6503 >> > www.steltor.com >> >> Either see if its listed in inetd.conf if your system usesd inetd, >> or see if there is an amanda in /etc/xinetd.d. If so, edit it to >> change the disable = yes line to disable = no, then restart >> /etc/rc.d/int.d/xinetd. >> >> -- >> Cheers, Gene >> AMD K6-III@500mhz 320M >> Athlon1600XP@1400mhz 512M >> 98.96+% setiathome rank, not too shabby for a hillbilly >> >> >> >> > > > --------------------------------------------- > This message was sent using Endymion MailMan. > http://www.endymion.com/products/mailman/ > > > > -- Frank Smith [EMAIL PROTECTED] Systems Administrator Voice: 512-374-4673 Hoover's Online Fax: 512-374-4501