Hello, I was able to see the changer and the drive, but mt says my drive is either offline or no tape loaded (and is correct, no tape loaded).
/dev/rmt/0n: no tape loaded or drive offline However, I was not able to get the sgen.conf to work correctly. I couldn't get the config_sgen_solaris script to work without a CVROOT set. Any ideas what I can do from here? Thanks... Ed FOR THE TAPE: ------------ IIRC, the drive in that box is a DLT-7000, right? For that drive, with Solaris 8, you won't need to touch st.conf. After the 'boot -r' you should have /dev/rmt/0* (if you've never had a tape drive on this box before), and you should be able to 'mt -f /dev/rmt/0n status'. The devices will be: 0l*: 20G (DLT4000, compression off) 0m*: 40G (DLT4000, compression on) 0h*: 35G (DLT7000, compression off) 0*: 70G (DLT7000, compression on) 0c*: 70G (DLT7000, compression on) 0u*: 70G (DLT7000, compression on) You can download a nice Solaris st.conf PDF from Quantum, but you don't need it. FOR THE CHANGER: --------------- These days, for Solaris 8, I'm recommending sgen(7D) and mtx. Even if you don't end up using chg-zd-mtx, mtx itself is nice to have, and the mtx source includes a nice little contrib/config_sgen_solaris script. You end up with an sgen.conf something like: device-type-config-list="changer"; name="sgen" class="scsi" target=0 lun=0; name="sgen" class="scsi" target=1 lun=0; name="sgen" class="scsi" target=2 lun=0; name="sgen" class="scsi" target=3 lun=0; name="sgen" class="scsi" target=4 lun=0; name="sgen" class="scsi" target=5 lun=0; name="sgen" class="scsi" target=6 lun=0; name="sgen" class="scsi" target=7 lun=0; name="sgen" class="scsi" target=8 lun=0; name="sgen" class="scsi" target=9 lun=0; name="sgen" class="scsi" target=10 lun=0; name="sgen" class="scsi" target=11 lun=0; name="sgen" class="scsi" target=12 lun=0; name="sgen" class="scsi" target=13 lun=0; name="sgen" class="scsi" target=14 lun=0; name="sgen" class="scsi" target=15 lun=0; (You don't *need* every possible target, of course). This ends up making /dev/scsi/changer/cXtYd0. -- Jay Lessert [EMAIL PROTECTED] Accelerant Networks Inc. (voice)1.503.439.3461 Beaverton OR, USA (fax)1.503.466.9472