You are correct. I have been testing the chg-zd-mtx from the CL. Not inside amanda and so far everything is working correctly. The only command that is hanging is the loading of a tape
ie. /usr/local/libexec/chg-zd-mtx -slot 6 will actually load the tape but never exit or give me an exit status. The debug output look like LOADSLOT -> load tape from slot 6 -> loading tape from slot 6 to /dev/nrsa0 -> status 0, result '' What is confusing is if I use /usr/local/libexec/chg-zd-mtx -reset it will eject the tape and load the first slot successfully. Am I missing something in the conf file? -greg >I would recommend not trying to debug the changer stuff from way up >on high in AMANDA, but to debug at the command line by running the >changer script directly... The ./docs/TAPE.CHANGERS document will >guide you with the syntax to do this on the CL. >If you have not already made all of AMANDA operate without the >changer (just set the tapedev to the device specifier), then I would >recommend doing that first.... >Isolating the two will help the issues fall out in a more apparent fashion...