On Mon, 18 Nov 2002 11:42:11 -0500 Galen Johnson <[EMAIL PROTECTED]> wrote:
> Perhaps the barcode device has different ownership/permissions/group > than the rest of the devices? I don't have a barcode reader device so > I'm just throwing out possiblities... > > =G= Not really, the barcodes are being read trough the same device which is used to controll the library, and that one is readable / writable by sys group. Also, the chg-scsi is actually able to read the barcodes (visible in debug) but trashes somewhere past that point. I did 2 x trusses, one for root and one for amanda, this is what I see when looking at the area near crash: Amanda User: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ----cut-------- write(10, " 1 0 3 7 6 3 5 5 9 7 : #".., 50) = 50 time() = 1037635597 write(10, " 1 0 3 7 6 3 5 5 9 7 : #".., 37) = 37 time() = 1037635597 write(10, " 1 0 3 7 6 3 5 5 9 7 : d".., 51) = 51 time() = 1037635597 write(10, " 1 0 3 7 6 3 5 5 9 7 : #".., 48) = 48 open64("/etc/amanda/daily.scsi/tape0-slot", O_RDONLY) = 4 fstat64(4, 0xFFBFF728) = 0 fstat64(4, 0xFFBFF5D0) = 0 ioctl(4, TCGETA, 0xFFBFF6B4) Err#25 ENOTTY read(4, " 0\n", 8192) = 2 llseek(4, 0xFFFFFFFFFFFFFFFF, SEEK_CUR) = 1 close(4) = 0 time() = 1037635597 write(10, " 1 0 3 7 6 3 5 5 9 7 : #".., 31) = 31 time() = 1037635597 write(10, " 1 0 3 7 6 3 5 5 9 7 : u".., 57) = 57 time() = 1037635597 write(10, " 1 0 3 7 6 3 5 5 9 7 : u".., 64) = 64 time() = 1037635597 time() = 1037635597 time() = 1037635597 time() = 1037635597 time() = 1037635597 time() = 1037635597 Incurred fault #6, FLTBOUNDS %pc = 0x000182E4 siginfo: SIGSEGV SEGV_MAPERR addr=0x00000020 Received signal #11, SIGSEGV [default] siginfo: SIGSEGV SEGV_MAPERR addr=0x00000020 ----end-------- Root User: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ----cut-------- write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 50) = 50 time() = 1037635622 write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 37) = 37 time() = 1037635622 write(10, " 1 0 3 7 6 3 5 6 2 2 : d".., 51) = 51 time() = 1037635622 write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 48) = 48 open64("/etc/amanda/daily.scsi/tape0-slot", O_RDONLY) = 4 fstat64(4, 0xFFBFF718) = 0 fstat64(4, 0xFFBFF5C0) = 0 ioctl(4, TCGETA, 0xFFBFF6A4) Err#25 ENOTTY read(4, " 0\n", 8192) = 2 llseek(4, 0xFFFFFFFFFFFFFFFF, SEEK_CUR) = 1 close(4) = 0 time() = 1037635622 write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 31) = 31 time() = 1037635622 write(10, " 1 0 3 7 6 3 5 6 2 2 : u".., 57) = 57 time() = 1037635622 write(10, " 1 0 3 7 6 3 5 6 2 2 : u".., 64) = 64 time() = 1037635622 time() = 1037635622 time() = 1037635622 time() = 1037635622 time() = 1037635622 time() = 1037635622 time() = 1037635622 time() = 1037635622 write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 42) = 42 time() = 1037635622 write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 34) = 34 time() = 1037635622 write(10, " S C S I _ E x e c u t e".., 38) = 38 time() = 1037635622 write(10, " 0 0", 3) = 3 time() = 1037635622 write(10, " 0 0", 3) = 3 time() = 1037635622 write(10, " 0 0", 3) = 3 time() = 1037635622 write(10, " 0 0", 3) = 3 time() = 1037635622 write(10, " 0 0", 3) = 3 time() = 1037635622 write(10, " 0 0", 3) = 3 time() = 1037635622 write(10, "\n", 1) = 1 time() = 1037635622 write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 33) = 33 open64("/dev/rmt/0cbn", O_RDWR|O_NDELAY) = 4 ioctl(4, 0x04C9, 0xFFBFF9F0) = 0 close(4) = 0 time() = 1037635622 time() = 1037635622 write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 46) = 46 time() = 1037635622 alarm(0) = 0 sigaction(SIGALRM, 0xFFBFF9C0, 0xFFBFFA70) = 0 sigprocmask(SIG_BLOCK, 0xFFBFFA60, 0xFFBFFA50) = 0 alarm(1) = 0 Received signal #14, SIGALRM, in sigsuspend() [caught] sigsuspend(0xFFBFFA40) Err#4 EINTR setcontext(0xFFBFF728) alarm(0) = 0 sigprocmask(SIG_UNBLOCK, 0xFFBFFA60, 0x00000000) = 0 sigaction(SIGALRM, 0xFFBFF9C0, 0x00000000) = 0 ----cut--------