On Wednesday 27 November 2002 03:53, [EMAIL PROTECTED] wrote: >Hello, > >I am currently setting up an amanda 2.4.3 server on Solaris 9 with > a Compaq TSL-9000 DDS-3 tape changer device and was wondering > which "tpchanger" script I should use, will chg-scsi work or do I > need to use chg-zd-mtx maybe ? The compaq tape changer uses one > target but then the tape runs on LUN 0 and the changer on LUN 1. > >Thanks > >Marc
chg-scsi which seems to be right at home with a drive at lun0/robot at lun1 setup, is running one of the many variations of Seagate 4586 changers just fine here. This is the one that has either a 4 tape or a 12 tape(the drawer stays open and the magazine runs up and down the front of the computer) arranged so the tapes are horizontal. The drive is /dev/nst0, the robot is /dev/sg1. If this was linux, You'd have to build a kernel with the scsi option 'scan all luns' turned on else the robot won't be found. Its not on by default. I don't know about solaris though. -- Cheers, Gene AMD K6-III@500mhz 320M Athlon1600XP@1400mhz 512M 99.19% setiathome rank, not too shabby for a WV hillbilly