Jean-Louis Thanks for that :)
I can now run through the mtx tests, as per chg-zd-mtx, which feels like a big step in the right direction. Moving onto amtape... $ amtape Daily reset amtape: could not reset changer: no slots available I'm looking through the script, but struggling to see what's wrong with my config. Cheers Nige -----Original Message----- From: Jean-Louis Martineau [mailto:[EMAIL PROTECTED] Sent: 03 March 2003 16:29 To: Nigel Barker Cc: [EMAIL PROTECTED] Subject: Re: Solaris 8 Overland Tape changer config The first to do is to set your driveslot correctly, yours is 0. Jean-Louis On Mon, Mar 03, 2003 at 02:54:11PM -0000, Nigel Barker wrote: > Hi > > I know this is well trodden ground, believe me I've scanned the emails, > please could someone tell me where I'm going wrong? > > I'm using Solaris 8, with an OverlandXB 10 slot changer and a DLT drive. > Amanda 2.4.3 > mtx 1.2.17 > > I've identified the correct tape device, tested by :- > $mt -f /dev/rmt/1n status > Quantum DLT7000 tape drive: > sense key(0x0)= No Additional Sense residual= 0 retries= 0 > file no= 0 block no= 0 > > I've used sgen to get a device for the changer :- > $./mtx status > Storage Changer /dev/scsi/changer/c1t6d0:1 Drives, 10 Slots ( 0 > Import/Export ) > Data Transfer Element 0:Full (Storage Element 1 Loaded) > Storage Element 1:Empty > Storage Element 2:Full > Storage Element 3:Full > Storage Element 4:Full > Storage Element 5:Full > Storage Element 6:Full > Storage Element 7:Full > Storage Element 8:Full > Storage Element 9:Full > Storage Element 10:Full > > The changer has a cleaning tape in slot 10. > > amanda.conf contains :- > tpchanger "chg-zd-mtx" > tapedev "/dev/rmt/1n" > changerfile "/usr/local/share/amanda/Daily/chg-zd-mtx" > changerdev "/dev/scsi/cganger/c1t6do" > > I created a file chg-zd-mtx.conf containing :- > firstslot=1 > lastslot=9 > cleanslot=10 > > Trying to follow the chg-zd-mtx instructions, I try :- > $ ./chg-zd-mtx -info > <none> could not determine current slot > > Logfile contains :- > chg-zd-mtx: debug 1 pid 11255 ruid 0 euid 0: start at Mon Mar 3 14:31:47 > 2003 > 14:31:47 Arg info: > $# = 1 > $0 = "./chg-zd-mtx" > $1 = "-info" > 14:31:47 Running: mtx status > 14:31:47 Exit code: 0 > Stdout: > Storage Changer /dev/scsi/changer/c1t6d0:1 Drives, 10 Slots ( 0 > Import/Export ) > Data Transfer Element 0:Full (Storage Element 1 Loaded) > Storage Element 1:Empty > Storage Element 2:Full > Storage Element 3:Full > Storage Element 4:Full > Storage Element 5:Full > Storage Element 6:Full > Storage Element 7:Full > Storage Element 8:Full > Storage Element 9:Full > Storage Element 10:Full > 14:31:47 Config info: > firstslot = "1" > lastslot = "9" > cleanslot = "10" > cleancycle = "120" > offline_before_unload = "0" > unloadpause = "0" > autoclean = "0" > autocleancount = "99" > havereader = "0" > driveslot = "1" > poll_drive_ready = "3" > max_drive_wait = "120" > 14:31:47 WARNING -> current slot 1 not available, setting current slot to > next slot (2) > 14:31:47 Exit (2) -> <none> could not determine current slot > chg-zd-mtx: pid 11340 finish time Mon Mar 3 14:31:47 2003 > > Now, checking chg-zd-mtx-slot, it contains 1, and doesn't change! > (I then verified that the file was owned by backup, the amanda user, which > it is, and that backup owns the entire config directory. > > Any help would be MUCH appreciated. > > Many thanks > > Nigel Barker -- Jean-Louis Martineau email: [EMAIL PROTECTED] Departement IRO, Universite de Montreal C.P. 6128, Succ. CENTRE-VILLE Tel: (514) 343-6111 ext. 3529 Montreal, Canada, H3C 3J7 Fax: (514) 343-5834