(cc'ing list) Paul Bijnens said: > Kurt Yoder wrote: > >> Hello list >> I recently switched amanda servers, and copied a manual chg-multi > > What is a "manual chg-multi"? I use a "chg-multi" in my config, and I have used a "chg-manual" in the past. Can you use chg-multi for manual purposes too?
Yes. Unfortunately I can't find the documentation that said how to do this any more. However, one does it by setting run-tapes to some number and tpchanger to chg-multi. Then in the changerfile one specifies a single slot pointing to the tape drive device, firstslot 1 and lastslot 1. So amanda writes everything it can to tape 1. Then if it has more it tries to write to tape 2..n but is forced to leave it on the holding disk instead. Then you can manually put in the next tape and flush. It worked well on this machine, but I reinstalled the machine with a different hard disk and new configuration (see separate thread on this list about gzip errors for the reason). Now it's not working any more. > How does your chg-multi.conf look like? multieject 0 gravity 0 needeject 0 ejectdelay 0 statefile /var/backups/changer-status firstslot 1 lastslot 1 slot 1 /dev/nst0 Looks identical to the previous working config. -- Kurt Yoder Sport & Health network administrator