I read about it here and I think my problem is the
blocksize between reading and writing, however I don't know how I can fix
it.
Somebody can help me?
my setup:
$ amlabel DailySet1 DailySet100
labeling tape in slot 1 (/dev/st0):
rewinding, reading label, not an amanda tape rewinding, writing label DailySet100, checking label amlabel: no label found, are you sure /dev/st0 is
non-rewinding?
$ mt -f /dev/st0 status
SCSI 2 tape drive:
File number=0, block number=0, partition=0. Tape block size 0 bytes. Density code 0x13 (DDS (61000 bpi)). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN $ /etc/amanda/DailySet1/amanda.conf
org "DailySet1"
mailto "cpd"
dumpuser "amanda"
inparallel 4
netusage 600 Kbps
dumpcycle 4 weeks
runspercycle 4 weeks
tapecycle 25 tapes
bumpsize 20 Mb
bumpdays 1
bumpmult 4
etimeout 300
runtapes 1
tpchanger "chg-multi"
changerfile
"/etc/amanda/DailySet1/changer.conf"
tapetype SONY-DAT
labelstr "^DailySet1[0-9][0-9]*$"
holdingdisk hd1 {
comment "main holding disk"
directory "/var/tmp"
use 290 Mb
chunksize 2 Gb
}
infofile "/var/lib/amanda/DailySet1/curinfo" # database filename
logdir "/var/lib/amanda/DailySet1" # log
directory
indexdir "/var/lib/amanda/DailySet1/index" # index directory
tapelist "/etc/amanda/DailySet1/tapelist"
define tapetype SONY-DAT {
comment "SONY-DAT 5000"
length 3157 mbytes
filemark 2165 kbytes
speed 204 kps
}
define dumptype global {
comment "Global definitions"
}
define dumptype comp-user-tar {
user-tar
compress client fast
}
$ /etc/amanda/DailySet1/changer.conf multieject 0
gravity 0
needeject 0
ejectdelay 0
statefile /etc/amanda/DailySet1/changer-status
firstslot 1
lastslot 1 slot 1 /dev/st0
Sem mais, Atenciosamente Marcelo Block - CPD CADService Produtos Eletrônicos Do more, Grow more, Be more.... ICQ: 319176888 Fone:55-19-3246-1333 |
- Re: Help I can't do amlabel Marcelo Block Teixeira
- Re: Help I can't do amlabel Roger Koot
- Re: Help I can't do amlabel Marcelo Block Teixeira