Hi, my amanda file in /etc/xinet.d/ looks exactly like this, the options are set correctly, too. I am not running inetd, only xinetd. Only the localhost (backup03m) is not passed correctly in amcheck, other hosts are ok. I tried the disklist file with 'localhost' instead of 'backup03m': The amcheck passes, but i get errors in starting amrecover, that backup03m isn't in disklist. To me it seemed easier to change 'localhost' to 'backup03m' in the disklist file than change anything else in the configuration. But why can't amcheck connect to the host it is running on?
Nice greetings, Christoph Am Donnerstag, 6. November 2003 10:21 schrieben Sie: > On Thursday 06 November 2003 03:57, Christoph Brunner wrote: > >Hi, > > > >when i run amcheck, i get an error, that the host, i am currently > > working on, is not available: > > > >==================================================== > >[EMAIL PROTECTED] amanda $ amcheck -c DailySet1 > > > >Amanda Backup Client Hosts Check > >-------------------------------- > >WARNING: backup03m: selfcheck request timed out. Host down? > >Client check: 2 hosts checked in 30.201 seconds, 1 problem found > > > >(brought to you by Amanda 2.4.4p1) > >==================================================== > > > >A nslookup|dig|host can resolve the hostname, so that can't be the > > problem. If i write the FQDN of the host name in the disklist, the > > error is the same. > > > >Does anyone know, where the problem is? > > Are you running on a system that uses xinetd? > > If so, my guess is that you need a file, located in /etc/xinetd.d, > called amanda, probably owned by amanda:disk, that resembles this > one: > ------------------------------------ > # default = off > # > # description: Part of the Amanda server package > # This is the list of daemons & such it needs > service amanda > { > disable = no > socket_type = dgram > protocol = udp > wait = yes > user = amanda > group = disk > groups = yes > server = /usr/local/libexec/amandad > } > service amandaidx > { > disable = no > socket_type = stream > protocol = tcp > wait = no > user = amanda > group = disk > groups = yes > server = /usr/local/libexec/amindexd > } > service amidxtape > { > disable = no > socket_type = stream > protocol = tcp > wait = no > user = amanda > group = disk > groups = yes > server = /usr/local/libexec/amidxtaped > } > --------------------------------------- > > Modify the paths to suit your system of course, and the 'user' and > 'group' to match yours. > > Of course if you're still running things from an inetd list, the docs > contain the info to set that up. Either must be restarted to take > effect of course. > > >Nice greetings, > >Christoph Brunner