--On Tuesday, December 23, 2003 17:53:52 +0100 Stefan Hackenthal <[EMAIL PROTECTED]> wrote:
> Hello folks, > > as an Amanda newbie I don't know how to imterpret this log. Can you > help me? > > I see two problems: he does not find the tape. That is probably a > problem with the changer (I'm using chg-zd-mtx on a HP Autoloader): > I'll check the conf-file. Either a changer config problem or you haven't labeled the tapes. > > The other problem is the message "can't switch to incremental dump". > What does Amanda want to tell me here? Or is this simply a follow-up > from the first error? It's telling you that either your config is set to only do fulls or you've never done a full before on those filesystems so there is nothing to run an incremental against (or possibly there is not enough space on the holding disk, but I think that gives a different error.) Frank > > Background info: I had a test dump on the holding disk and started > all over like described in the FAQ (deleting all the files). Does > Amanda still 'remember' the first Full backup? > > ===================== > *** A TAPE ERROR OCCURRED: [label Daily02 or new tape not found in rack]. > Some dumps may have been left in the holding disk. > Run amflush to flush them to tape. > The next 6 tapes Amanda expects to used are: Daily02, Daily03, Daily04, Daily05, > Daily06, Daily01. > > FAILURE AND STRANGE DUMP SUMMARY: > chef /boot lev 0 FAILED [can't switch to incremental dump] > mary /boot lev 0 FAILED [can't switch to incremental dump] > mary /data/a/data/aktuell/151_EVA lev 0 FAILED [can't switch to incremental > dump] > > [..] > ===================== > > -- > Greetings > Stefan Hackenthal [EMAIL PROTECTED] > Aldebaran GmbH, Im Moore 26, 30167 Hannover, Telefon 0511-270 416 21 > -- Frank Smith [EMAIL PROTECTED] Systems Administrator Voice: 512-374-4673 Hoover's Online Fax: 512-374-4501