Hi, Gene Heskett, on Donnerstag, 09. September 2004 at 01:54 you wrote to amanda-users:
GH> That would be the only line in that config driver thats dbl GH> quoted, but I tried it, nuked everything and re-built and GH> installed it, no real diffs to be seen. GH> I've rebuilt it several times with this config: GH> -------------- GH> #!/bin/sh GH> # since I'm always forgetting to su amanda... GH> if [ `whoami` != 'amanda' ]; then GH> echo GH> echo "!!!!!!!!!!!! Warning !!!!!!!!!!!!" GH> echo "Amanda needs to be configured and built by the user amanda," GH> echo "but must be installed by user root." GH> echo GH> exit 1 GH> fi GH> make clean GH> rm -f config.status config.cache GH> ./configure --with-user=amanda \ GH> --with-group=disk \ GH> --with-owner=amanda \ GH> --with-gnu-ld \ GH> --prefix=/usr/local \ GH> --with-tapedev="FILE:/amandatapes" \ GH> --with-debugging=/tmp/amanda-dbg/ \ GH> --with-tape-server=coyote.coyote.den \ GH> --with-amandahosts \ GH> --with-configdir=/usr/local/etc/amanda GH> make Ok. ... GH> #tpchanger "chg-scsi" # the tape-changer glue script GH> #tpchanger "chg-mtx" GH> tpchanger "changer" GH> #tapedev "0" # the no-rewind tape device to be used GH> tapedev "FILE:/amandatapes/DailySet1" GH> rawtapedev "FILE:/amandatapes/Dailyset1" GH> changerfile "/usr/local/etc/amanda/DailySet1/changer" GH> tapetype HARD-DISK GH> labelstr "^DailySet1-[0-9][0-9]*$" # label constraint regex: all tapes must match GH> amrecover_changer "changer" This should be: tpchanger "chg-disk" # the tape-changer glue script changerfile "/usr/local/etc/amanda/DailySet1/changer.conf" # Just noticed that I have "changer.conf" here and not "changer" ... tapedev "file:/amandatapes/DailySet1" changerdev "file:/amandatapes/DailySet1" amrecover_changer "chg-disk" You don't need rawtapedev. GH> And I now note that in my attempts to run amcheck or amlabel, GH> I now have files in the /config/ dir named -access, -clean GH> and -slot, which tells me the name string those are supposed GH> to be appended to is a null string, probaby because the name GH> 'changer' isn't correct, or is not correctly keyword identified. Maybe because it really has to be "changer.conf" as noticed above. If yes, another bug in the howto, but I wonder why noone else has hit this before ... GH> and a run of amcheck gets this: GH> --------------- GH> [EMAIL PROTECTED] amanda-2.4.5b1-20040831]$ amcheck DailySet1 GH> amcheck: error while loading shared libraries: GH> libamserver-2.4.5b1-20040831.so: cannot open shared object file: GH> Nosuch file or directory GH> ---------------- GH> The library does indeed exist: Run "ldconfig". -- best regards, Stefan Stefan G. Weichinger mailto:[EMAIL PROTECTED]