I just noticed these errors in the output of amstatus, from a run last night: [EMAIL PROTECTED]:/etc/amanda/Outside$ amstatus Outside Using /var/amanda/Outside/amdump.1 from Fri Sep 10 00:45:02 EDT 2004
www:sda1 1 0k finished (0:51:14) www:sda10 2 1919k finished (0:51:51) www:sda11 0 3319737k finished (4:42:52) www:sda12 1 150k wait for dumping driver: (aborted) Use of uninitialized value in printf at /usr/local/sbin/amstatus line 742. www:sda14 0 0k failed to tape (7:20:40) Use of uninitialized value in addition (+) at /usr/local/sbin/amstatus line 757. Use of uninitialized value in addition (+) at /usr/local/sbin/amstatus line 767. www:sda2 2 104343k finished (0:56:14) www:sda5 1 120k finished (0:52:07) www:sda6 1 3094k wait for dumping driver: (aborted) www:sda7 0 5295676k finished (3:01:40) www:sda8 2 50437k finished (1:02:50) SUMMARY part real estimated size size partition : 10 estimated : 10 14068515k flush : 0 0k failed : 0 0k ( 0.00%) wait for dumping: 2 3244k ( 0.02%) dumping to tape : 0 0k ( 0.00%) dumping : 0 0k 0k ( 0.00%) ( 0.00%) dumped : 8 13847339k 14065271k ( 98.45%) ( 98.43%) wait for writing: 1 0k 5075107k ( 0.00%) ( 0.00%) wait to flush : 0 0k 0k (100.00%) ( 0.00%) writing to tape : 0 0k 0k ( 0.00%) ( 0.00%) failed to tape : 1 0k 5075107k ( 0.00%) ( 0.00%) taped : 7 8772232k 8990164k ( 97.58%) ( 62.35%) tape 1 : 7 8772232k 8990164k ( 53.47%) Outside-04 4 dumpers idle : not-idle taper idle network free kps: 5800 holding space : 3392k (100.00%) dumper0 busy : 6:29:10 ( 99.93%) taper busy : 6:27:14 ( 99.43%) 0 dumpers busy : 0:00:16 ( 0.07%) start-wait: 0:00:16 (100.00%) 1 dumper busy : 6:29:10 ( 99.93%) not-idle: 6:27:14 ( 99.50%) start-wait: 0:00:59 ( 0.25%) no-bandwidth: 0:00:56 ( 0.24%) [EMAIL PROTECTED]:/etc/amanda/Outside$ Has the bahavior of amstatus changed? I thought you couldn't get an amstatus after the run was completed. Here's the section of the code: 737 elsif($taper_finished{$hostpart} < 0) { 738 if( defined $opt_failed || 739 (defined $opt_waittaper && ($taper_finished{$hostpart} == -1))) { 740 printf "%8s ", $datestamp if defined $opt_date; 741 printf "%-${maxnamelength}s%2d", "$host:$partition", $level{$hostpa 741 rt}; 742 printf "%9dk", $size{$hostpart}; 743 if($in_flush == 0) { 744 print " failed to tape"; 745 } 746 else { 747 print " failed to flush"; 748 } 749 print " (will retry)" unless $taper_finished{$hostpart} < -1; 750 if( defined $starttime ) { 751 print " (", &showtime($taper_time{$hostpart}), ")"; 752 } 753 print "\n"; 754 } 755 756 $tfpartition++; 757 $tfsize += $size{$hostpart}; 758 if(defined $esize{$hostpart}) { 759 $tfesize += $esize{$hostpart}; 760 } 761 else { 762 $tfesize += $size{$hostpart}; 763 } 764 765 if($in_flush == 0) { 766 $twpartition++; 767 $twsize += $size{$hostpart}; 768 if(defined $esize{$hostpart}) { 769 $twesize += $esize{$hostpart}; 770 } 771 else { 772 $twesize += $size{$hostpart}; 773 } 774 } I'm not much of a coder, but these don't seem significant; just complaining about output strings which can't be printed. Here's the version info: [EMAIL PROTECTED]:/etc/amanda/Outside$ amadmin Outside version build: VERSION="Amanda-2.4.4p3" BUILT_DATE="Wed Aug 18 16:27:23 EDT 2004" BUILT_MACH="Linux www.jhuccp.org 2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i686 unknown" CC="gcc" CONFIGURE_COMMAND="'./configure' '--with-user=amanda' '--with-group=disk' '--with-owner=amanda' '--with-tape-device=/dev/nst0' '--prefix=/usr/local' '--with-portrange=10080,10083' '--with-tcpportrange=10080,10083' '--with-udpportrange=850,854' '--with-debugging=/tmp/amanda-dbg/' '--with-configdir=/etc/amanda'" paths: bindir="/usr/local/bin" sbindir="/usr/local/sbin" libexecdir="/usr/local/libexec" mandir="/usr/local/man" AMANDA_TMPDIR="/tmp/amanda" AMANDA_DBGDIR="/tmp/amanda-dbg/" CONFIG_DIR="/etc/amanda" DEV_PREFIX="/dev/" RDEV_PREFIX="/dev/" DUMP="/sbin/dump" RESTORE="/sbin/restore" VDUMP=UNDEF VRESTORE=UNDEF XFSDUMP=UNDEF XFSRESTORE=UNDEF VXDUMP=UNDEF VXRESTORE=UNDEF SAMBA_CLIENT=UNDEF GNUTAR="/bin/tar" COMPRESS_PATH="/bin/gzip" UNCOMPRESS_PATH="/bin/gzip" LPRCMD=UNDEF MAILER="/usr/bin/Mail" listed_incr_dir="/usr/local/var/amanda/gnutar-lists" defs: DEFAULT_SERVER="www.jhuccp.org" DEFAULT_CONFIG="DailySet1" DEFAULT_TAPE_SERVER="www.jhuccp.org" DEFAULT_TAPE_DEVICE="/dev/nst0" HAVE_MMAP HAVE_SYSVSHM LOCKING=POSIX_FCNTL SETPGRP_VOID DEBUG_CODE AMANDA_DEBUG_DAYS=4 BSD_SECURITY USE_AMANDAHOSTS CLIENT_LOGIN="amanda" FORCE_USERID HAVE_GZIP COMPRESS_SUFFIX=".gz" COMPRESS_FAST_OPT="--fast" COMPRESS_BEST_OPT="--best" UNCOMPRESS_OPT="-dc" [EMAIL PROTECTED]:/etc/amanda/Outside$ Thanks for your thoughts on this. Let me know if there's anything else I can to to help solve this problem. -Kevin