On Wed, Mar 09, 2005 at 07:39:13PM +1100, Jobst Schmalenbach wrote: > > All, > > I have tried to search the docs and faq for this but > couldnt find any info.
Probably looking for it under a specific name. > > I want to use two sets off tapes so I can have one > on-site and one off-site and swap those every second > week or so. But this is more a general operating principle. > > > How do I do this? > Do I use two different Sets, eg. DailySet1 and DailySet2? > > Do I make two daily sets with 10 tapes each, so I > can backup 5 times (workdays) a weeks for 2 weeks > and then swap the sets? > > > Do I name the two tape sets with the same labels > and then just swap them over? > It sounds to me as if you have a dumpcycle set for about one week, with 5 runs of amdump per dumpcycle. Further, it appears you 'feel' that for such a setup you will need 5 tapes, one for each run of amdump. That is where your setup is out of kilter. The norm is to have in rotation, 2, 3, 4, or more times as many tapes as are needed in a single dumpcycle. Then it is simply a matter of taking offsite a group of 5 tapes from the normal rotation and exchanging them a week later. If budget permits 4 sets of tapes (is your data worth it?) you could have a set in use plus, on-site the most recent set for recovery of recently changed things, off-site the set from 2 weeks ago, and on-site the set from three weeks ago that will be re-used and overwritten next week. All those would be from the same config, just numbered or named something like xxx01 - xxx20. Don't get hung up over the tape names. Specifically, don't call them something like "set1-1, set1-2, ... set4-1", or Monday-set1, Friday-set4, ... Invariably they will get out of sequence and the names will be more confusing if you assign them set membership rather than simple identifiers. Who really cares if the box labeled set 3 contains tapes 11, 12, 14, 15, 16 (tape 13 somehow slipped to set 4 :) rather than set3-1 to set3-5. But if tape set3-3 slipped into set 4, then people would be upset. -- Jon H. LaBadie [EMAIL PROTECTED] JG Computing 4455 Province Line Road (609) 252-0159 Princeton, NJ 08540-4322 (609) 683-7220 (fax)
