I had a similar issue and I found out a couple of things that needed to be done with my particular changer , Dell PowerVault. I had to terminate the changer on all ports and I also had to edit the rc.local file (or you can recompile the kernel (which I did after verifying that the rc.local file editing worked correctly) to scan for multiple LUNS) to scan multiple LUNs and it fixed the issue about the I/O error. Of course the rc.local file editing is dependant on your particular setup for choosing the x x x x" > /proc/scsi/scsi
I put the following in the /etc/rc.local file; echo "scsi-add-single-device 1 0 3 1" > /proc/scsi/scsi (which detects LUN 1 at target ID 3 at bus 0 at adapter 1) Hope this helps you. Jason -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frank Smith Sent: Friday, May 27, 2005 3:03 PM To: Matheson Cameron; amanda-users@amanda.org Subject: Re: making progress... --On Friday, May 27, 2005 10:49:09 -0700 Matheson Cameron <[EMAIL PROTECTED]> wrote: > Ok, my amanda set up is coming along... amanda will > now back up my computer (i've only configured this one > client for testing purposes), but there are still some > things that i don't understand. here's the output > from amcheck.log: > > Amanda Tape Server Host Check > ----------------------------- > Holding disk /var/tmp: 13625172 KB disk space > available, using 12576596 KB > amcheck-server: slot 2: date 20050526 label > DailySet1000 (active tape) > amcheck-server: slot 3: date 20050526 label > DailySet1000 (active tape) > amcheck-server: slot 4: chg-multi: slot is empty > amcheck-server: slot 5: date 20050526 label > DailySet1000 (active tape) > amcheck-server: slot 6: date 20050526 label > DailySet1000 (active tape) > amcheck-server: slot 7: date 20050526 label > DailySet1000 (active tape) > ,,, > amcheck-server: slot 1: date 20050526 label > DailySet1000 (active tape) > ERROR: new tape not found in rack > (expecting a new tape) > > Out of the 30 slots i have in my tape-changer, i only > have 17 loaded... but amanda sees DailySet1000 in all > 30 slots... why is that? I didn't see anyone else respond, so I'll jump in with a guess. Are you sure your changer script works properly? Can you watch the changer while running amcheck and see if it actually loads every tape? My guess is that you are just re-reading the label off the same tape 30 times. > also, this isn't totally related to amanda, but i'm > still trying to learn this whole tape-drive thing... > my tape-changer has two tape drives in it, nts0 and > nts1. i can do everything w/ nts0, but if i try to do > anything w/ nts1 (mt -f /dev/nts1 tell, for example), > i get an i/o error. any clues? Perhaps your OS doesn't see all the devices. Linux kernels, for example, need the option set to scan for multiple LUNS (CONFIG_SCSI_MULTI_LUN=y) or it will only detect the first device. You should be able to manually control your drives and changer before trying to debug Amanda, since if the mt (or mtx or whatever) commands fail, Amanda won't be able to work. Frank > > thanks guys, > Cameron Matheson > -- Frank Smith [EMAIL PROTECTED] Sr. Systems Administrator Voice: 512-374-4673 Hoover's Online Fax: 512-374-4501
