On Fri, 2005-07-08 at 10:34 -0600, Cam wrote: > havereader 1 > firstslot 1 > lastslot 17 > cleanslot -1 > offline_before_unload 0 > > but when i run the "/usr/lib/amanda/chg-zd-mtx -info'" it reports "4 30 1 "
Where are you running it from? It'll read the config in the local directory (IIRC), so you should run it from your config directory. > These values are good (the 30 is what i want, but i changed it to 17 > for testing purposes), but they are clearly not what is in my > changer.conf. I've noticed that on our Exabyte unit, it *always* reports the number of slots that actually have tapes in them, as opposed to the number of slots I've specified to use, or the total number of slots. > I'm not sure if it's guessing the information on it's > own or pulling it from some other file... i read through some of the > /tmp/amanda/chg-zd-mtx stuff, but unfortunately they do not tell me > what config file it's reading from. Any help would be greatly > appreciated. What do you have in relation to the changer in your amanda.conf? -- Graeme Humphries ([EMAIL PROTECTED]) Linux Administrator VCom Inc. (306) 955-7075 ext 485 My views and comments do not necessarily reflect the views of my employer.