On Saturday 13 August 2005 16:29, Marcus wrote: >Here's what I get > >[EMAIL PROTECTED]:~> sudo /usr/sbin/mtx -f /dev/sg0 inquiry >Product Type: Tape Drive >Vendor ID: 'QUANTUM ' >Product ID: 'DLT8000 ' >Revision: '0232' >Attached Changer: No >[EMAIL PROTECTED]:~> sudo /usr/sbin/mtx -f /dev/sg1 inquiry >Product Type: Medium Changer >Vendor ID: 'ADIC ' >Product ID: 'FastStor DLT ' >Revision: '0119' >Attached Changer: No >[EMAIL PROTECTED]:~> > >Does it matter to chg-scsi that it says 'no changer' >like that? Thanks for any help.
I don't believe so. I think, but could be wrong, that when mtx reports an attached changer, it may be at other than the base LUN=0. If the devices are seperated by their device address on the scsi bus, as opposed to being at the same address but a different LUN, with the latter being where mtx picks up on the Attached changer bits. But, don't take my word for it, go study the manpages for mtx for the final word. -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) 99.35% setiathome rank, not too shabby for a WV hillbilly Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2005 by Maurice Eugene Heskett, all rights reserved.
