We have amanda 2.4.5p1 server running under debian linux on a dual opteron that's driving a new overland tape library with an ultrium3 drive. For now, the holding disk is a dedicated local 120 GB drive.
There's an amanda 2.4.5p1 client also running under debian linux on another dual opteron that's connected to the amanda server host via a dedicated gig network. This host is a moderately loaded fileserver with hardware raid. Backing up a 10 GB test partition, we're seeing dumper and taper performance around 2.5 MB/sec, a fraction of what the hardware is capable of. The amanda server was configured with max tape blocksize set to 8192kb. None of the other configure script options are unusual-- prefix, user, group, amandahosts, db=text, gnutar. The dumptype does not specify software commpression on either end. Feels like we're overlooking something basic, but so far we're not seeing what it is. Any suggestions would be welcome. Roy Heimbach -- Roy Heimbach 505-277-8348 / User Services / [EMAIL PROTECTED] University of New Mexico, Albuquerque
