Jon LaBadie wrote:
On Wed, May 17, 2006 at 06:00:31PM -0700, Brad Willson wrote:
Where is the changer defined?
# ls -l
total 68
-rw-rw---- 1 backup backup 19493 Mar 24 07:42 amanda.conf
-rw-r--r-- 1 backup backup 1267 May 16 09:35 changer
This is from memory, so confirm before using:
chg-zd-mtx wants the changer config file defined in amanda.conf,
but you enter it there without a ".conf" extension. Still,
I think chg-zd-mtx looks for the file with the .conf.
If my memory is correct, this line from your amanda.conf
changerfile "/etc/amanda/DailySet1/changer"
should be matched by a changer".conf" file.
Will symlinks cause any problems? I have...
lrwxrwxrwx 1 backup backup 29 May 15 21:43 changer.conf ->
/etc/amanda/DailySet1/changer to address the issue above.
Then, although amanda.conf does allow an entry for changerdev,
like you have done here:
changerdev "/dev/sg0"
I think (again did not check) that it is also defined in changer.conf.
That will take precedence.
amanda.conf, changer, changer.conf are now filthy with changerdev
"/dev/sg0" and still the amtape DailySet1 update reports
amtape DailySet1 update
changer: got exit: 0 str: 6 10 1 1
changer_query: changer return was 10 1 1
changer_query: searchable = 1
amtape: scanning all 10 slots in tape-changer rack:
changer_find: looking for NULL changer is searchable = 1
changer: got exit: 0 str: 6 /dev/nst0
slot 6: not an amanda tape (Invalid argument)
changer: got exit: 0 str: 7 /dev/nst0
slot 7: not an amanda tape (Invalid argument)
changer: got exit: 0 str: 8 /dev/nst0
slot 8: not an amanda tape (Invalid argument)
changer: got exit: 0 str: 9 /dev/nst0
slot 9: not an amanda tape (Invalid argument)
changer: got exit: 0 str: 10 /dev/nst0
slot 10: not an amanda tape (Invalid argument)
Tomorrow 2.5.0* will make it's journey to /dev/null! 2.4 something will take
its place.
--
Brad Willson, Sr. Computer Specialist
UW GeneTests, UW Box: 358735
EM: [EMAIL PROTECTED]
W: 206.221.4674, C: 425.891.2732
http://www.genetests.org