Hi The next tape worked OK.
Thus wasnt forced to run amflush and then insert the next tape. I will check the log on the server as I had only checked the client amanda.log Cheers On Wed, 2006-07-05 at 09:30 +0200, Paul Bijnens wrote: > On 2006-07-04 16:11, Chuck Amadi Systems Administrator wrote: > > Hi List > > > > I am a bit concerned as for a few days I have had to run amflush after > > amdump has complained as per error below: > > > > This particular server siis on the other side of the fw fence thus not > > in my LAN I had increased the timeouts on the firewall but I am again > > getting problems. > > > > Amanda Admin Report > > > > These dumps were to tape SMTLSet105. > > *** A TAPE ERROR OCCURRED: [[writing file: No space left on device]]. > > This is probably the root the problem: your tape is full (or broken). > > > > > Some dumps may have been left in the holding disk. > > Run amflush to flush them to tape. > > The next tape Amanda expects to use is: SMTLSet106. > > > > /-- server / lev 0 FAILED ["data write: Connection reset by peer"] > > Is this backup bypassing the holdingdisk? > And was it interrupted by the tape full error above? > > > > > > I checked the servers /tmp/amanda directory and less the debuy file But > > I see nothing there to alarm me!.. > > The error occured on the server, not on the client. > See file amdump.XX on the server. > >