Kevin Till wrote:
Mike Allen wrote:
Kevin Till wrote:
Mike Allen wrote:
try configure with "--with-tcpportrange=50000,50100
--with-udpportrange=512,1023 ..." and recompile.
Open the corresponding ports in the firewall setup.
The reason udp port 34932 was tried because Amanda cannot find a
reserved udp port that it can use.
The following occurred while compiling with the values you suggested:
<snip>
Hi,
add "-with-tcpportrange=50000,50100 --with-udpportrange=512,1023" to
whatever you have in your configure line. For example:
./configure --with-user=amandabackup --with-group=disk
-with-tcpportrange=50000,50100 --with-udpportrange=512,1023
Run configure again and make install.
After configuring both the ta;e server and the client with the
suggested portranges above
I got the following:
14:46:02.501703 IP famrad.familyradio.org.47737 >
familyserv.familyradio.org.amanda: UDP, length: 123
14:46:02.543577 IP familyserv.familyradio.org.amanda >
famrad.familyradio.org.47737: UDP, length: 50
14:46:02.544603 IP familyserv.familyradio.org.amanda >
famrad.familyradio.org.47737: UDP, length: 109
14:46:02.549035 IP famrad.familyradio.org.47737 >
familyserv.familyradio.org.amanda: UDP, length: 50
Notice the reference to port 47737 which is outside the range(s)
specified. I have a feeling I am doing
something really stupid!
Any help will be greatly appreciated.
Is there a firewall in between? If it's iptables, you can tell by
running "iptables -L".
The page below could be helpful too.
http://wiki.zmanda.com/index.php/Configuration_with_iptables
Mike
Yes there is a firewall in between the tape-host and the client. It is
NOT IP-tables based but
is commercially made by Netgear. (That may be my problem).
An assumption I am making is the path(s) from where I do my
configurations. I'm using
/usr/ports/.misc/amanda-client/work/amanda* and
/usr/ports/misc/amanda-server/work/amanda* on
the client and server respectively. Am I (re)configuring my system from
the correct directory
on my FreeBSD system?
Mike