<quote who="Paul Bijnens">
> On 2006-08-08 16:17, Gavin Henry wrote:
>>
>> Currently trying to compile 2.5.0p2 with:
>>
>> ./configure --with-user=amanda --with-group=disk --with-ssh-security
>> --with-config=Suretec --with-changer-device=/dev/sg2
>> --with-tape-device=/dev/nst0
>>
>> But configure just sits there at:
>>
>> checking for smbclient... /usr/bin/smbclient
>>
>> Same when adding --with-smbclient=/usr/bin/smbclient
>
>
> If you do not need smbclient support, then you can configure
> with  "--without-smbclient"  and work around this problem.

I have tried that, and with --with-smbclient=no.

I've been going through configure.in to see what the probs are.

>
> If you do need it...  then try to investigate what is blocking.
> It seems like "configure" is hanging in one of the next steps.
>
> Configure tries to find out what version of smbclient you have
> by running the command:
>
> smbclient '\\not.a.host.name\notashare' -U nosuchuser -N -Tx /dev/null

Looks like it's this. It just hangs.

I just setup 2 clients on Fedora Core 5 with 2.5.0p2, and they both are fine.

The server is on a SUSE 9.3 x86_64 box, that has (Is a Samba PDC too):

free -m
             total       used       free     shared    buffers     cached
Mem:          3961        296       3665          0         48        154
-/+ buffers/cache:         93       3868
Swap:         2070          0       2070

uname -a
Linux nas1 2.6.14.2-smp #2 SMP Thu Nov 17 15:31:40 GMT 2005 x86_64 x86_64
x86_64 GNU/Linux

df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda1              73G  6.0G   67G   9% /
tmpfs                 2.0G     0  2.0G   0% /dev/shm
/dev/sdb              6.9T  263G  6.6T   4% /storage

lsscsi
[0:0:0:0]    disk    ATA      HTS541080G9SA00  MB4O  /dev/sda
[4:0:1:0]    tape    CERTANCE ULTRIUM 2        1775  /dev/st0
[4:0:1:1]    mediumx QUANTUM  UHDL             000E  -
[6:0:0:0]    disk    Areca    ARC-1160-VOL#00  R001  /dev/sdb

>
> What happens if you run that manually?

Hangs

> The output of that step does not appear on screen however, so it could
> be that configure is actually hanging on the step after that.

I think it's smbclient that is the problem.

>
> The next step is finding out where the "gzip" program lives.
> Is does that by looking in several directories.
> If one of those directories happens to be mounted on a non-responsive
> NFS-server, you hang here too.
>
> The list of directories is:
> /bin:/usr/bin:/sbin:/usr/sbin:/usr/ucb:/usr/bsd:/etc:/usr/etc
> /usr/local/sbin:/usr/local/bin:/usr/ccs/bin
> and the value of $PATH from the user that runs configure.
>
> Anything strange when trying "test -e /bin/gzip"?  (Try that for
> all the above dirs)

Nope, looks fine.

>
>
> --
> Paul Bijnens, xplanation Technology Services        Tel  +32 16 397.511
> Technologielaan 21 bus 2, B-3001 Leuven, BELGIUM    Fax  +32 16 397.512
> http://www.xplanation.com/          email:  [EMAIL PROTECTED]
> ***********************************************************************
> * I think I've got the hang of it now:  exit, ^D, ^C, ^\, ^Z, ^Q, ^^, *
> * F6, quit, ZZ, :q, :q!, M-Z, ^X^C, logoff, logout, close, bye, /bye, *
> * stop, end, F3, ~., ^]c, +++ ATH, disconnect, halt,  abort,  hangup, *
> * PF4, F20, ^X^X, :D::D, KJOB, F14-f-e, F8-e,  kill -1 $$,  shutdown, *
> * init 0, kill -9 1, Alt-F4, Ctrl-Alt-Del, AltGr-NumLock, Stop-A, ... *
> * ...  "Are you sure?"  ...   YES   ...   Phew ...   I'm out          *
> ***********************************************************************
>
>

Reply via email to