Quick question will Amanda work correctly with two different configurations, each one using a tape drive running at the same time?
Ex. Data Transfer Element 0:Empty Data Transfer Element 1:Full (Storage Element 9 Loaded):VolumeTag = EGV010 these are my 2 drives. However, When I try to run /opt/amanda/server/sbin/amlabel -f FullDB EGV010 slot 9 Here is the error I get "amlabel: could not load slot "9": Drive not ready after 120 seconds, rewind said "/dev/rmt/3cn:"Drive not ready after no seconds, rewind said "tape"Drive not ready after loaded seconds, rewind said "or"Drive not ready after drive seconds, rewind said "offline"" The tape EGV010 always goes to drive 0 instead of 1. mtx -f /dev/scsi/changer/c5t3d1 status Storage Changer /dev/scsi/changer/c5t3d1:2 Drives, 24 Slots ( 1 Import/Export ) Data Transfer Element 0:Full (Storage Element 9 Loaded):VolumeTag = EGV010 Here are the conf files for FullDB cat changer.conf firstslot=1 lastslot=23 driveslot=1 cleanslot=-1 autoclean=0 autocleancount=99 havereader=1 offline_before_unload=0 initial_poll_delay=0 tapedev "/dev/rmt/3cn" # the no-rewind tape device to be used ***Currently using hardware compression changerdev "/dev/scsi/changer/c5t3d1" amrecover_changer "/dev/scsi/changer/c5t3d1" Thanks