Hello @all, yesterday we got a Sun Storedge L700 with 3 Drives LTO4 and 678 slots. I can use mtx for changing the tapes from every slot to every slot, no problem. My problem is that it moans if I want to load these tapes into the drives. But I see people using this autochanger in the internet, what did I wrong?
Here is what I am doing: root@amanda:~# lsscsi -g [0:0:0:0] cd/dvd hp DVD RW AD-7586H KP03 /dev/sr0 /dev/sg0 [2:0:0:0] storage HP HSV200 6220 - /dev/sg3 [2:0:1:0] storage HP HSV200 6220 - /dev/sg4 [2:0:3:0] mediumx STK L700 0318 /dev/sch0 /dev/sg7 <----- [2:0:5:0] tape IBM ULTRIUM-TD4 A232 /dev/st0 /dev/sg8 [2:0:6:0] tape IBM ULTRIUM-TD4 A232 /dev/st1 /dev/sg9 [2:0:7:0] tape IBM ULTRIUM-TD4 A232 /dev/st2 /dev/sg10 [3:0:0:0] storage HP P410i 3.66 - /dev/sg1 [3:0:0:1] disk HP LOGICAL VOLUME 3.66 /dev/sda /dev/sg2 [4:0:0:0] storage HP HSV200 6220 - /dev/sg5 [4:0:1:0] storage HP HSV200 6220 - /dev/sg6 root@amanda:~# mtx -f /dev/sg7 status Storage Changer /dev/sg7:3 Drives, 698 Slots ( 20 Import/Export ) Data Transfer Element 0:Empty Data Transfer Element 1:Empty Data Transfer Element 2:Empty Storage Element 1:Full :VolumeTag=DAY$02 Storage Element 2:Empty Storage Element 3:Empty Storage Element 4:Full :VolumeTag=DAY$07 Storage Element 5:Full :VolumeTag=DAY$02 Storage Element 6:Full :VolumeTag=DAY$07 Storage Element 7:Full :VolumeTag=DAY$00 Storage Element 8:Empty Storage Element 9:Empty Storage Element 10:Full :VolumeTag=DAY$07 Storage Element 11:Empty Storage Element 12:Empty Storage Element 13:Empty Storage Element 14:Empty Storage Element 15:Empty Storage Element 16:Empty Storage Element 17:Empty Storage Element 18:Empty Storage Element 19:Empty Storage Element 20:Empty ... Storage Element 679 IMPORT/EXPORT:Empty Storage Element 680 IMPORT/EXPORT:Empty Storage Element 681 IMPORT/EXPORT:Empty Storage Element 682 IMPORT/EXPORT:Empty Storage Element 683 IMPORT/EXPORT:Empty Storage Element 684 IMPORT/EXPORT:Empty Storage Element 685 IMPORT/EXPORT:Empty Storage Element 686 IMPORT/EXPORT:Empty Storage Element 687 IMPORT/EXPORT:Empty Storage Element 688 IMPORT/EXPORT:Empty Storage Element 689 IMPORT/EXPORT:Empty Storage Element 690 IMPORT/EXPORT:Empty Storage Element 691 IMPORT/EXPORT:Empty Storage Element 692 IMPORT/EXPORT:Empty Storage Element 693 IMPORT/EXPORT:Empty Storage Element 694 IMPORT/EXPORT:Empty Storage Element 695 IMPORT/EXPORT:Empty Storage Element 696 IMPORT/EXPORT:Empty Storage Element 697 IMPORT/EXPORT:Empty Storage Element 698 IMPORT/EXPORT:Empty root@amanda:~# mtx -f /dev/sg7 transfer 4 3 (runs perfectly) root@amanda:~# mtx -f /dev/sg7 load 3 or root@amanda:~# mtx -f /dev/sg7 load 3 0 instead will fail with the following error message: Loading media from Storage Element 3 into drive 0...mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error Code=70 (Current) mtx: Request Sense: Sense Key=Illegal Request mtx: Request Sense: FileMark=no mtx: Request Sense: EOM=no mtx: Request Sense: ILI=no mtx: Request Sense: Additional Sense Code = 30 mtx: Request Sense: Additional Sense Qualifier = 00 mtx: Request Sense: BPV=no mtx: Request Sense: Error in CDB=no mtx: Request Sense: SKSV=no MOVE MEDIUM from Element Address 1002 to 500 Failed I phoned the seller of this and they said that they checked the library with their tool and everything was ok. Do I make something wrong or do have any recommendation? -- Best Regards, Dennis Benndorf +---------------------------------------------------------------------- |This was sent by dennis.bennd...@gmx.de via Backup Central. |Forward SPAM to ab...@backupcentral.com. +----------------------------------------------------------------------