Might your files have passed through a windows system? I'm thinking that each line ends with the M$ style of CR/LF but your OS is expecting only LF.
On Tue, Jan 08, 2013 at 02:59:11PM -0800, bulut wrote: > hi everyone, > > I installed Amanda-3.3.2 on debian (32 bit) from source code. > > ./configure --with-user=amanda --with-group=backup --with-rsh-security > --with-ssh-security --with-smbclient --with-bsdtcp-security --disable-nls > > Everytihnks goes fine but I can't run amlabel, amdump or amcheck with "-t" > parameter. > > amanda@bulut:/usr/local/etc/amanda/SERVERS$ amcheck -t SERVERS > Amanda Tape Server Host Check > ----------------------------- > Current slot not loaded > Taper scan algorithm did not find an acceptable volume. > (expecting a new volume) > ERROR: No acceptable volumes found > Server check took 2.141 seconds > > (brought to you by Amanda 3.3.2) > > > amanda@bulut:/usr/local/etc/amanda/SERVERS$ amlabel -f SERVERS Tape-02 > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 2: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 2: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 6: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 6: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 9: FIRST, FIRSTFIT, > LARGEST, LARGESTFIT, SMALLEST or LAST expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 11: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 11: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 21: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 21: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 22: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 27: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 27: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 29: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 29: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 31: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 31: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 35: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 35: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 36: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 38: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 38: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 52: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 52: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 60: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 60: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 61: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 62: configuration keyword > expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 63: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 63: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 65: configuration keyword > expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 66: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 66: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 67: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 68: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 70: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 70: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 72: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 72: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 74: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 74: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 77: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 77: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 78: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 78: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 80: configuration keyword > expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 81: configuration keyword > expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 82: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 82: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 83: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 84: configuration keyword > expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 85: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 87: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 87: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 88: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 88: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 90: configuration keyword > expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 91: configuration keyword > expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 92: configuration keyword > expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 93: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 93: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 95: duplicate parameter; > previous definition /usr/local/etc/amanda/SERVERS/amanda.conf:16 > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 96: configuration keyword > expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 97: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 100: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 100: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 101: error: not a keyword. > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 101: end of line is expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 103: configuration keyword > expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 104: configuration keyword > expected > "/usr/local/etc/amanda/SERVERS/amanda.conf", line 105: error: not a keyword. > parse error: tapetype HP-DAT is not defined > > I have a tape unit with no tape changer: /dev/nst0 > I notice my amanda.conf file but I can't find anything strange > My amanda.conf file is here; > > org "etc" # your organization name for reports > mailto "ce...@mail.etc" # space separated list of operators at > your site > dumpuser "amanda" # the user to run dumps under > > inparallel 1 > dumporder "sssS" # specify the priority order of each dumper > taperalgo first # The algorithm used to choose which dump image > to send > > displayunit "k" # Possible values: "k|m|g|t" > > netusage 8000 Kbps # maximum net bandwidth for Amanda, in KB per sec > > dumpcycle 4 weeks # the number of days in the normal dump cycle > runspercycle 20 # the number of amdump runs in dumpcycle days > # (4 weeks * 5 amdump runs per week -- just weekdays) > tapecycle 25 tapes # the number of tapes in rotation > > bumpsize 20 Mb # minimum savings (threshold) to bump level 1 > -> 2 > bumppercent 20 # minimum savings (threshold) to bump level 1 > -> 2 > bumpdays 1 # minimum days at each level > bumpmult 4 # threshold = bumpsize * bumpmult^(level-1) > > etimeout 300 # number of seconds per filesystem for estimates. > dtimeout 1800 # number of idle seconds before a dump is aborted. > ctimeout 30 # maximum number of seconds that amcheck waits > # for each client host > > device_output_buffer_size 1280k > > usetimestamps yes > > flush-threshold-dumped 0 > flush-threshold-scheduled 0 > taperflush 0 > autoflush no > > runtapes 1 # number of tapes to be used in a single run of > amdump > > tpchanger "chg-manual" > changerdev "/dev/null" > tapedev "/dev/nst0" > > maxdumpsize -1 # Maximum number of bytes the planner will > schedule > # for a run (default: runtapes * tape_length). > tapetype HP-DAT # what kind of tape it is (see tapetypes below) > labelstr "^Tape-[0-9][0-9]*$" # label constraint regex: all tapes must match > > amrecover_changer "changer" # amrecover will use the changer if you restore > > holdingdisk hd1 { > comment "main holding disk" > directory "/tmp/holdingdisk" > use -100 Mb > chunksize 1Gb > } > > infofile "/usr/local/etc/amanda/SERVERS/curinfo" # database DIRECTORY > logdir "/usr/local/etc/amanda/SERVERS" # log directory > indexdir "/usr/local/etc/amanda/SERVERS/index" # index > directory > > define tapetype HP-DAT { > comment "DAT tape drives" > length 1930 mbytes > filemark 111 kbytes > speed 468 kbytes > } > > define dumptype dump-local { > comment "Full dump of this filesystem always" > compress none > program "GNUTAR" > priority high > dumpcycle 0 > auth "local" > } > > > define interface local { > comment "a local disk" > use 8000 kbps > } > > Note: I installed amanda-server and amanda-client with apt but same errors > happenned. > > +---------------------------------------------------------------------- > |This was sent by bu...@kebikec.net via Backup Central. > |Forward SPAM to ab...@backupcentral.com. > +---------------------------------------------------------------------- > > > >>> End of included message <<< -- Jon H. LaBadie j...@jgcomp.com 11226 South Shore Rd. (703) 787-0688 (H) Reston, VA 20190 (609) 477-8330 (C)