Good call, that worked! Wed Nov 08 12:12:02.180979631 2017: pid 23508: thd-0x18fd200: taper: Device is in variable block size Wed Nov 08 12:12:04.573098503 2017: pid 23508: thd-0x18fd200: taper: Slot 14 with label 000114L7 is usable Wed Nov 08 12:12:04.591316642 2017: pid 23508: thd-0x18fd200: taper: Building type TAPESTART header of 2097152-2097152 bytes with name='000114L7' disk='' dumplevel=0 and blocksize=2097152
Rolling again, Thank you very much for the help, Greg On Wed, Nov 8, 2017 at 11:57 AM, Jean-Louis Martineau < jmartin...@carbonite.com> wrote: > I do not understand why it doesn't want to use the tapes. > > Can you try the following: (If you agree amanda can overwrite 000114L7 > amrmtape WeeklySet1 --keep-label 000114L7 > amatpe WeeklySet1 update 14= > > After the update, the taper should load the slot, you should see it in the > taper debug file. > > Jean-Louis > > > On 08/11/17 11:45 AM, Greg Dickie wrote: > > Wed Nov 08 11:43:15.492889388 2017: pid 23508: thd-0x18fd200: taper: > invoking /usr/sbin/mtx -f /dev/sg1 status > Wed Nov 08 11:43:16.026704763 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Changer /dev/sg1:1 Drives, 24 Slots ( 0 Import/Export ) > Wed Nov 08 11:43:16.026751421 2017: pid 23508: thd-0x18fd200: taper: mtx: > Data Transfer Element 0:Full (Storage Element 21 Loaded):VolumeTag = > 000121L7 > Wed Nov 08 11:43:16.026780475 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 1:Empty > Wed Nov 08 11:43:16.026799697 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 2:Empty > Wed Nov 08 11:43:16.026809868 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 3:Empty > Wed Nov 08 11:43:16.026818338 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 4:Empty > Wed Nov 08 11:43:16.026825880 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 5:Empty > Wed Nov 08 11:43:16.026833781 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 6:Empty > Wed Nov 08 11:43:16.026841346 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 7:Empty > Wed Nov 08 11:43:16.026848729 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 8:Empty > Wed Nov 08 11:43:16.026857121 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 9:Empty > Wed Nov 08 11:43:16.026866301 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 10:Full :VolumeTag=000110L7 > Wed Nov 08 11:43:16.026896922 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 11:Full :VolumeTag=000111L7 > Wed Nov 08 11:43:16.026908845 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 12:Full :VolumeTag=000112L7 > Wed Nov 08 11:43:16.026919029 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 13:Full :VolumeTag=000113L7 > Wed Nov 08 11:43:16.026928701 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 14:Full :VolumeTag=000114L7 > Wed Nov 08 11:43:16.026939958 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 15:Full :VolumeTag=000115L7 > Wed Nov 08 11:43:16.026949743 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 16:Full :VolumeTag=000116L7 > Wed Nov 08 11:43:16.026961396 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 17:Full :VolumeTag=000117L7 > Wed Nov 08 11:43:16.026971300 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 18:Full :VolumeTag=000118L7 > Wed Nov 08 11:43:16.026983376 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 19:Full :VolumeTag=000119L7 > Wed Nov 08 11:43:16.026993560 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 20:Full :VolumeTag=000120L7 > Wed Nov 08 11:43:16.027002906 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 21:Empty > Wed Nov 08 11:43:16.027010865 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 22:Empty > Wed Nov 08 11:43:16.027019542 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 23:Empty > Wed Nov 08 11:43:16.027026856 2017: pid 23508: thd-0x18fd200: taper: mtx: > Storage Element 24:Empty > Wed Nov 08 11:43:16.027077019 2017: pid 23508: thd-0x18fd200: taper: > flexstorii: updating state > Wed Nov 08 11:43:16.029230821 2017: pid 23508: thd-0x18fd200: taper: new > Amanda::Changer::Error: type='failed', reason='notfound', message='No > acceptable volumes found' > > > On Wed, Nov 8, 2017 at 10:15 AM, Jean-Louis Martineau < > jmartin...@carbonite.com> wrote: > >> On 08/11/17 10:07 AM, Greg Dickie wrote: >> > So in /var/lib/amanda/CONFIG I do not see taper logs. I'll figure out >> > why.. >> run: amgetconf build.amanda_dbgdir >> Go in the resulting directory /server/WeeklySet1 >> >> Jean-Louis >> >> >> *Disclaimer* >> >> This message is the property of *CARBONITE, INC.* >> <http://www.carbonite.com> and may contain confidential or privileged >> information. >> >> If this message has been delivered to you by mistake, then do not copy or >> deliver this message to anyone. Instead, destroy it and notify me by reply >> e-mail. >> > > > > -- > > > Greg Dickie > just a guy > 514-983-5400 <(514)%20983-5400> > > > > > *Disclaimer* > > This message is the property of *CARBONITE, INC.* > <http://www.carbonite.com> and may contain confidential or privileged > information. > > If this message has been delivered to you by mistake, then do not copy or > deliver this message to anyone. Instead, destroy it and notify me by reply > e-mail. > -- Greg Dickie just a guy 514-983-5400