On Saturday 18 September 2021 02:26:23 Jon LaBadie wrote: > On Fri, Sep 17, 2021 at 01:09:48PM -0400, Gene Heskett wrote: > >On Friday 17 September 2021 12:09:55 Jon LaBadie wrote: > >> While investigating a tape issue (separate thread) > >> I investigated the "allow-split" parameter of > >> amanda.conf. The man page says it defaults to "true" > >> and my configuration has never set it. > >> > >> Thinking perhaps the default has changed I tried > >> setting allow-split several ways and places. amcheck > >> always complains "configuration parameter expected". > >> > >> Also, amgetconf says there is no configuration parameter > >> called "allow-split". > >> > >> Does anyone have "allow-split" in their configuration? > >> If so, how/where? > > > >I do acc grep: > >gene@coyote:~$ sudo grep allow > > /usr/local/etc/amanda/Daily/amanda.conf maxdumps 1 # allowing > > one per host makes sense to me > ># skip-full - skip the disk when a level 0 is due, to allow full > >backups > > > >define dumptype global { > >... > > allow-split true > >} > > > > > >Copyright 2019 by Maurice E. Heskett > >Cheers, Gene Heskett > > OF COURSE, it a dumptype parameter. My stupidity. > > I've added it, but I suspect it will have no affect > as the default is true. > > Jon Thats my assumption too Jon. But when I put the 2T drive in as /amandatapes, I expanded the size of the vtapes, and its not skipped to the next tape since. That was 7 or 8 tapecycles back up the log. The lady is almost civilized now. :)
I just added the /home tree of another machine as I now have one delegated to running cura and openscad so I've a one stop src to drive a 3d printer which is making me a magazine stuffer so that 6.5 Creedmoor shells might feed thru a P-17 action which is what old AT&T is built on, but after wearing out 4 barrels chambered for the Ackley-improved 30-06 since I built it in the '60's, I screwed a 6.5 barrel in it 2 years back and chambered it for the Creedmoor, a bit easier on the old mans shoulder since it will be 87 in a couple weeks. But the shorter, fatter shell made a single shot out of it, so I'm trying to fix it... Since that machine isn't surrounded by human comfort first furniture, I log into it from here to program OpenSCAD via an ssh -Y login. Its running debian buster and can run the latest AppImage of OpenSCAD whereas this machine is still running stretch and won't run the latest OpenSCAD. But I am preparing to put bullseye on this one, and have a large pocketfull of 1T SamSung 870 SSD's I'm going to use as a raid 6 or raid 10, for everything but /boot & swap with a separate 1/2T 860 SamSung drive for /boot & swap. So in another 2 or 3 weeks I should have bullseye up and running here, so the folks on the debian list will quit giving me hell for running old stuff. But with the OpenSCAD exception its running very well. I hope this finding you and Gundy in good health. My Dee passed from COPD last Pearl Harbor Day, so I'm alone now. And the place is keeping me busy. Replaceing split rail fencing that has to be rebuilt every 10 years with vinyl, that sort of stuff. The shasta white shingles I put on in 2010 after the direcho remodeled the place have lost the white, running the AC bill way up, so thats gotta be redone next spring. We'll see how I feel then. Take care you two. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene>