I'm almost sure that is not a cable problem, I have 2 drives and they have the same problem when use amanda, are ok when using tar or dd

Cheers,
Nuno

On 20/04/2026 15:19, Exuvo wrote:
The last time i had sporadic errors it was a bad cable connection to the tape drive. Fixed it by re-plugging all connectors.

Otherwise you will have to track down the error message and work your way back to where and why it goes wrong.

// Anton "exuvo" Olsson
[email protected] <mailto:[email protected]>

On Mon, 20 Apr 2026, 14:46 Nuno Dias, <[email protected] <mailto:[email protected]>> wrote:

       Hi,

       Yes, dd, tar, etc works, mt and mtx also without problems, only
    when I
    use commands from amanda I have the problems, one other thing I forgot
    to write, I have an error, but after some hours I can do the command
    again without problems, for example

    $ amlabel CONF LABEL01 slot 1  (OK)
    $ amlabel CONF LABEL02 slot 2  (ERROR)

       Some hours later

    $ amlabel CONF LABEL02 slot 2 (OK)

       That's the reason I changed the times in the configuration of the
    changer, thinking was amanda trying to do something before the
    changer/tape ended the previous operation.

    Cheers,
    Nuno

    On 20/04/2026 11:38, Exuvo wrote:
     > Does basic usage with mt and dd work with the device?
     >
     > // Anton "exuvo" Olsson
     > [email protected] <mailto:[email protected]> <mailto:[email protected]
    <mailto:[email protected]>>
     >
     > On Mon, 20 Apr 2026, 11:46 Nuno Dias, <[email protected]
    <mailto:[email protected]>
     > <mailto:[email protected] <mailto:[email protected]>>> wrote:
     >
     >        Hi,
     >
     >        I'm using amanda for years, with a Tape Robot and LTO4 and
    LTO6
     >     drives
     >     without problems (excluding minor issues).
     >
     >        Now, I have a new Tape Robot with LTO9 drives, and I can't do
     >     anything
     >     with amanda, using amlabel or amtape for example, in the first
     >     interaction work, but in the second interaction complains
    that tape "is
     >     not a tape device".
     >
     >        In the logs I have this
     >
     >     Device tape:/dev/tape/by-id/scsi-3500308c44344e008-nst
    setting status
     >     flag(s): DEVICE_STATUS_DEVICE_ERROR, and
    DEVICE_STATUS_DEVICE_BUSY
     >
     >        But nothing is using the tape.
     >
     >        I already extended the "times" in the configuration of the
    changer
     >
     >               property "load-poll" "200s poll 200s until 700s"
     >               property "eject-delay" "200s"
     >               property "unload-delay" "200s"
     >
     >        But this doesn't solve the problem.
     >
     >        I found a report in github https://github.com/zmanda/
    amanda/ <https://github.com/zmanda/amanda/>
     >     issues/277 <https://github.com/zmanda/amanda/issues/277
    <https://github.com/zmanda/amanda/issues/277>>
     >     reporting the same problem, without any update from one year
    ago :(
     >
     >        Anyone have any ideia how to solve this? Amanda
    development it seems
     >     stopped, but works very good until now, this is my last hope
    until I
     >     move to other software :(
     >
     >     Thanks,
     >     Nuno
     >     --
     >     Nuno Dias <[email protected] <mailto:[email protected]>
    <mailto:[email protected] <mailto:[email protected]>>>
     >     LIP
     >

-- Nuno Dias <[email protected] <mailto:[email protected]>>
    LIP


--
Nuno Dias <[email protected]>
LIP

Reply via email to