sysfs interface for fine grained clock and voltage control. Signed-off-by: Alex Deucher <alexander.deuc...@amd.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index 9d52618a5c4c..d7f322061de3 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -455,6 +455,29 @@ static ssize_t amdgpu_set_pp_table(struct device *dev, return count; } +/** + * DOC: pp_od_clk_voltage + * + * The amdgpu driver provides a sysfs API for adjusting the clocks and voltages + * in each power level within a power state. The pp_od_clk_voltage is used for + * this. + * + * Reading the file will display: + * - a list of engine clock levels and voltages labeled OD_SCLK + * - a list of memory clock levels and voltages labeled OD_MCLK + * - a list of valid ranges for sclk, mclk, and voltage labeled OD_RANGE + * + * To manually adjust these settings, first select manual using + * power_dpm_force_performance_level. Enter a new value for each + * level by writing a string that contains "s/m level clock voltage" to + * the file. E.g., "s 1 500 820" will update sclk level 1 to be 500 MHz + * at 820 mV; "m 0 350 810" will update mclk level 0 to be 350 MHz at + * 810 mV. When you have edited all of the states as needed, write + * "c" (commit) to the file to commit your changes. If you want to reset to the + * default power levels, write "r" (reset) to the file to reset them. + * + */ + static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev, struct device_attribute *attr, const char *buf, -- 2.13.6 _______________________________________________ amd-gfx mailing list amd-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/amd-gfx