From: Eric Yang <eric.ya...@amd.com>
[Why]
Megachip dockings accesses ddc line through display driver when
installing FW. Previously, we would fail every transaction because
link attached to mst branch did not have their ddc transaction type
set.
[How]
Set ddc transaction type when mst branch is connected.
Signed-off-by: Eric Yang <eric.ya...@amd.com>
Reviewed-by: Charlene Liu <charlene....@amd.com>
Acked-by: Harry Wentland <harry.wentl...@amd.com>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 053ef83ea60f..d6259698470b 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -498,6 +498,10 @@ static bool detect_dp(
sink_caps->signal = SIGNAL_TYPE_DISPLAY_PORT_MST;
link->type = dc_connection_mst_branch;
+ dal_ddc_service_set_transaction_type(
+ link->ddc,
+
sink_caps->transaction_type);
+
/*
* This call will initiate MST topology discovery. Which
* will detect MST ports and add new DRM connector DRM
--
2.17.1
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
