From: Roman Li <roman...@amd.com>
[Why]
For upcoming PSR stupport it's useful to have debug entry
to verify psr state.
[How]
- Enable psr dc api for Linux
- Add psr_state file to eDP connector debugfs
usage e.g.: cat /sys/kernel/debug/dri/0/DP-1/psr_state
Signed-off-by: Roman Li <roman...@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlaus...@amd.com>
Acked-by: Leo Li <sunpeng...@amd.com>
---
.../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 21 +++
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 149 ++++++++++++++++++
2 files changed, 170 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
index e29c6314f98c..bdb37e611015 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
@@ -969,6 +969,25 @@ static int force_yuv420_output_get(void *data, u64 *val)
DEFINE_DEBUGFS_ATTRIBUTE(force_yuv420_output_fops, force_yuv420_output_get,
force_yuv420_output_set, "%llu\n");
+/*
+ * Read PSR state
+ */
+static int psr_get(void *data, u64 *val)
+{
+ struct amdgpu_dm_connector *connector = data;
+ struct dc_link *link = connector->dc_link;
+ uint32_t psr_state = 0;
+
+ dc_link_get_psr_state(link, &psr_state);
+
+ *val = psr_state;
+
+ return 0;
+}
+
+
+DEFINE_DEBUGFS_ATTRIBUTE(psr_fops, psr_get, NULL, "%llu\n");
+
void connector_debugfs_init(struct amdgpu_dm_connector *connector)
{
int i;
@@ -982,6 +1001,8 @@ void connector_debugfs_init(struct amdgpu_dm_connector
*connector)
dp_debugfs_entries[i].fops);
}
}
+ if (connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)
+ debugfs_create_file_unsafe("psr_state", 0444, dir, connector,
&psr_fops);
debugfs_create_file_unsafe("force_yuv420_output", 0644, dir, connector,
&force_yuv420_output_fops);
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 935053664160..10a04565535c 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -2436,6 +2436,155 @@ bool dc_link_set_psr_allow_active(struct dc_link *link,
bool allow_active, bool
return true;
}
+bool dc_link_get_psr_state(const struct dc_link *link, uint32_t *psr_state)
+{
+ struct dc *core_dc = link->ctx->dc;
+ struct dmcu *dmcu = core_dc->res_pool->dmcu;
+
+ if (dmcu != NULL && link->psr_feature_enabled)
+ dmcu->funcs->get_psr_state(dmcu, psr_state);
+
+ return true;
+}
+
+bool dc_link_setup_psr(struct dc_link *link,
+ const struct dc_stream_state *stream, struct psr_config
*psr_config,
+ struct psr_context *psr_context)
+{
+ struct dc *core_dc;
+ struct dmcu *dmcu;
+ int i;
+ /* updateSinkPsrDpcdConfig*/
+ union dpcd_psr_configuration psr_configuration;
+
+ psr_context->controllerId = CONTROLLER_ID_UNDEFINED;
+
+ if (!link)
+ return false;
+
+ core_dc = link->ctx->dc;
+ dmcu = core_dc->res_pool->dmcu;
+
+ if (!dmcu)
+ return false;
+
+
+ memset(&psr_configuration, 0, sizeof(psr_configuration));
+
+ psr_configuration.bits.ENABLE = 1;
+ psr_configuration.bits.CRC_VERIFICATION = 1;
+ psr_configuration.bits.FRAME_CAPTURE_INDICATION =
+ psr_config->psr_frame_capture_indication_req;
+
+ /* Check for PSR v2*/
+ if (psr_config->psr_version == 0x2) {
+ /* For PSR v2 selective update.
+ * Indicates whether sink should start capturing
+ * immediately following active scan line,
+ * or starting with the 2nd active scan line.
+ */
+ psr_configuration.bits.LINE_CAPTURE_INDICATION = 0;
+ /*For PSR v2, determines whether Sink should generate
+ * IRQ_HPD when CRC mismatch is detected.
+ */
+ psr_configuration.bits.IRQ_HPD_WITH_CRC_ERROR = 1;
+ }
+
+ dm_helpers_dp_write_dpcd(
+ link->ctx,
+ link,
+ 368,
+ &psr_configuration.raw,
+ sizeof(psr_configuration.raw));
+
+ psr_context->channel = link->ddc->ddc_pin->hw_info.ddc_channel;
+ psr_context->transmitterId = link->link_enc->transmitter;
+ psr_context->engineId = link->link_enc->preferred_engine;
+
+ for (i = 0; i < MAX_PIPES; i++) {
+ if (core_dc->current_state->res_ctx.pipe_ctx[i].stream
+ == stream) {
+ /* dmcu -1 for all controller id values,
+ * therefore +1 here
+ */
+ psr_context->controllerId =
+ core_dc->current_state->res_ctx.
+ pipe_ctx[i].stream_res.tg->inst + 1;
+ break;
+ }
+ }
+
+ /* Hardcoded for now. Can be Pcie or Uniphy (or Unknown)*/
+ psr_context->phyType = PHY_TYPE_UNIPHY;
+ /*PhyId is associated with the transmitter id*/
+ psr_context->smuPhyId = link->link_enc->transmitter;
+
+ psr_context->crtcTimingVerticalTotal = stream->timing.v_total;
+ psr_context->vsyncRateHz = div64_u64(div64_u64((stream->
+ timing.pix_clk_100hz * 100),
+ stream->timing.v_total),
+ stream->timing.h_total);
+
+ psr_context->psrSupportedDisplayConfig = true;
+ psr_context->psrExitLinkTrainingRequired =
+ psr_config->psr_exit_link_training_required;
+ psr_context->sdpTransmitLineNumDeadline =
+ psr_config->psr_sdp_transmit_line_num_deadline;
+ psr_context->psrFrameCaptureIndicationReq =
+ psr_config->psr_frame_capture_indication_req;
+
+ psr_context->skipPsrWaitForPllLock = 0; /* only = 1 in KV */
+
+ psr_context->numberOfControllers =
+ link->dc->res_pool->timing_generator_count;
+
+ psr_context->rfb_update_auto_en = true;
+
+ /* 2 frames before enter PSR. */
+ psr_context->timehyst_frames = 2;
+ /* half a frame
+ * (units in 100 lines, i.e. a value of 1 represents 100 lines)
+ */
+ psr_context->hyst_lines = stream->timing.v_total / 2 / 100;
+ psr_context->aux_repeats = 10;
+
+ psr_context->psr_level.u32all = 0;
+
+#if defined(CONFIG_DRM_AMD_DC_DCN1_0)
+ /*skip power down the single pipe since it blocks the cstate*/
+ if (ASICREV_IS_RAVEN(link->ctx->asic_id.hw_internal_rev))
+ psr_context->psr_level.bits.SKIP_CRTC_DISABLE = true;
+#endif
+
+ /* SMU will perform additional powerdown sequence.
+ * For unsupported ASICs, set psr_level flag to skip PSR
+ * static screen notification to SMU.
+ * (Always set for DAL2, did not check ASIC)
+ */
+ psr_context->allow_smu_optimizations =
psr_config->allow_smu_optimizations;
+
+ /* Complete PSR entry before aborting to prevent intermittent
+ * freezes on certain eDPs
+ */
+ psr_context->psr_level.bits.DISABLE_PSR_ENTRY_ABORT = 1;
+
+ /* Controls additional delay after remote frame capture before
+ * continuing power down, default = 0
+ */
+ psr_context->frame_delay = 0;
+
+ link->psr_feature_enabled = dmcu->funcs->setup_psr(dmcu, link,
psr_context);
+
+ /* psr_enabled == 0 indicates setup_psr did not succeed, but this
+ * should not happen since firmware should be running at this point
+ */
+ if (link->psr_feature_enabled == 0)
+ ASSERT(0);
+
+ return true;
+
+}
+
const struct dc_link_status *dc_link_get_status(const struct dc_link *link)
{
return &link->link_status;
--
2.23.0
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
