Am 2021-04-28 um 11:11 a.m. schrieb Eric Huang:
> In NPS4 BIOS we need to find the closest numa node when creating
> topology io link between cpu and gpu, if PCI driver doesn't set
> it.
>
> Signed-off-by: Eric Huang <jinhuieric.hu...@amd.com>
> ---
> drivers/gpu/drm/amd/amdkfd/kfd_crat.c | 94 ++++++++++++++++++++++++++-
> 1 file changed, 91 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
> b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
> index 38d45711675f..57518136c7d7 100644
> --- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
> @@ -1759,6 +1759,87 @@ static int kfd_fill_gpu_memory_affinity(int
> *avail_size,
> return 0;
> }
>
> +#ifdef CONFIG_ACPI
> +static void kfd_find_numa_node_in_srat(struct kfd_dev *kdev,
> + int *numa_node)
> +{
> + struct acpi_table_header *table_header = NULL;
> + struct acpi_subtable_header *sub_header = NULL;
> + unsigned long table_end, subtable_len;
> + u32 pci_id = pci_domain_nr(kdev->pdev->bus) << 16 |
> + pci_dev_id(kdev->pdev);
> + u32 bdf;
> + acpi_status status;
> + struct acpi_srat_cpu_affinity *cpu;
> + struct acpi_srat_generic_affinity *gpu;
> + int pxm = 0, max_pxm = 0;
> + bool found = false;
> +
> + /* Fetch the SRAT table from ACPI */
> + status = acpi_get_table(ACPI_SIG_SRAT, 0, &table_header);
> + if (status == AE_NOT_FOUND) {
> + pr_warn("SRAT table not found\n");
> + return;
> + } else if (ACPI_FAILURE(status)) {
> + const char *err = acpi_format_exception(status);
> + pr_err("SRAT table error: %s\n", err);
> + return;
> + }
After a successful call to acpi_get_table you need to call
acpi_put_table before this function returns to avoid leaking memory.
> +
> + table_end = (unsigned long)table_header + table_header->length;
> +
> + /* Parse all entries looking for a match. */
> +
> + sub_header = (struct acpi_subtable_header *)
> + ((unsigned long)table_header +
> + sizeof(struct acpi_table_srat));
> + subtable_len = sub_header->length;
> +
> + while (((unsigned long)sub_header) + subtable_len < table_end) {
> + /*
> + * If length is 0, break from this loop to avoid
> + * infinite loop.
> + */
> + if (subtable_len == 0) {
> + pr_err("SRAT invalid zero length\n");
> + break;
> + }
> +
> + switch (sub_header->type) {
> + case ACPI_SRAT_TYPE_CPU_AFFINITY:
> + cpu = (struct acpi_srat_cpu_affinity *)sub_header;
> + pxm = *((u32 *)cpu->proximity_domain_hi) << 8 |
> + cpu->proximity_domain_lo;
> + if (pxm > max_pxm)
> + max_pxm = pxm;
> + break;
> + case ACPI_SRAT_TYPE_GENERIC_AFFINITY:
> + gpu = (struct acpi_srat_generic_affinity *)sub_header;
> + bdf = *((u16 *)(&gpu->device_handle[0])) << 16 |
> + *((u16 *)(&gpu->device_handle[2]));
> + if (bdf == pci_id) {
> + found = true;
> + *numa_node = pxm_to_node(gpu->proximity_domain);
> + }
> + break;
> + default:
> + break;
> + }
> +
> + if (found)
> + break;
> +
> + sub_header = (struct acpi_subtable_header *)
> + ((unsigned long)sub_header + subtable_len);
> + subtable_len = sub_header->length;
> + }
> +
> + /* workaround bad cpu-gpu binding case */
> + if (found && (*numa_node < 0 || *numa_node > max_pxm))
> + *numa_node = 0;
A suggestion: If you find a sensible NUMA node, call set_dev_node here.
That simplifies the caller. See below
> +}
> +#endif
> +
> /* kfd_fill_gpu_direct_io_link - Fill in direct io link from GPU
> * to its NUMA node
> * @avail_size: Available size in the memory
> @@ -1774,6 +1855,9 @@ static int kfd_fill_gpu_direct_io_link_to_cpu(int
> *avail_size,
> uint32_t proximity_domain)
> {
> struct amdgpu_device *adev = (struct amdgpu_device *)kdev->kgd;
> +#ifdef CONFIG_NUMA
> + int numa_node = 0;
Should this be NUMA_NO_NODE?
> +#endif
>
> *avail_size -= sizeof(struct crat_subtype_iolink);
> if (*avail_size < 0)
> @@ -1805,9 +1889,13 @@ static int kfd_fill_gpu_direct_io_link_to_cpu(int
> *avail_size,
>
> sub_type_hdr->proximity_domain_from = proximity_domain;
> #ifdef CONFIG_NUMA
> - if (kdev->pdev->dev.numa_node == NUMA_NO_NODE)
> - sub_type_hdr->proximity_domain_to = 0;
> - else
> + if (kdev->pdev->dev.numa_node == NUMA_NO_NODE) {
> +#ifdef CONFIG_ACPI
> + kfd_find_numa_node_in_srat(kdev, &numa_node);
> +#endif
> + sub_type_hdr->proximity_domain_to = numa_node;
> + set_dev_node(&kdev->pdev->dev, numa_node);
> + } else
> sub_type_hdr->proximity_domain_to = kdev->pdev->dev.numa_node;
It's better style to use braces on all if/else branches, if one branch
needs them.
But with my suggestion above this would become simpler:
+#ifdef CONFIG_ACPI
+ if (kdev->pdev->dev.numa_node == NUMA_NO_NODE)
+ kfd_find_numa_node_in_srat(kdev);
+#endif
if (kdev->pdev->dev.numa_node == NUMA_NO_NODE)
sub_type_hdr->proximity_domain_to = 0;
else
sub_type_hdr->proximity_domain_to = kdev->pdev->dev.numa_node;
Regards,
Felix
> #else
> sub_type_hdr->proximity_domain_to = 0;
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
