On Wed, Jun 2, 2021 at 8:44 AM Chen Lei <chenlei...@ict.ac.cn> wrote: > > Hi, I noticed that there are two ways to do DMA for amd gpu: the SDMA copy > packet and the PM4 dma packet. > > I had tested the PM4 dma packet: PACKET3_DMA_DATA. In most of time, it works. > > But when I launch an OpenCL kernel followed by a host-to-gpu DMA packet, it > seems that the OpenCL kernel read the new value written by the following DMA > packet. > > Both the OpenCL kernel and the PM4 dma packet are submitted using the > amdgpu_cs_ioctl, and they are submitted to the same ring. > > I was not family with the hardware details. According to my understanding, > because the ring is FIFO, there is no need for any explicit synchronization > between the OpenCL kernel launch packet and the dma packet. So the result > looked weird. And when I add the synchronization(i.e. amdgpu_cs_wait_ioctl) > before the dma packet, everything is OK. > > Was it a hardware bug or did I miss something? >
The CP DMA engine is separate from the various CP micro engines. When there is a DMA DATA packet, the DMA operation is offloaded to the CP DMA engine and the CP engine that processed the packet continues on to the next packet. You need to use the ENGINE_SEL and CP_SYNC bits in the DMA DATA packet to specify the behavior you want. The ENGINE_SEL bit selects which CP engine processes the packet (PFP or ME) and the CP_SYNC bit stops further packet processing on the selected engine until the DMA is complete. Alex _______________________________________________ amd-gfx mailing list amd-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/amd-gfx