On 12/6/2021 2:14 PM, Lang Yu wrote:
On 12/06/ , Lazar, Lijo wrote:
On 12/6/2021 12:18 PM, Yu, Lang wrote:
[Public]
A typo.
-----Original Message-----
From: Yu, Lang
Sent: Monday, December 6, 2021 2:47 PM
To: Lazar, Lijo <lijo.la...@amd.com>; amd-gfx@lists.freedesktop.org
Cc: Deucher, Alexander <alexander.deuc...@amd.com>; Huang, Ray
<ray.hu...@amd.com>
Subject: RE: [PATCH 2/2] drm/amdgpu: allow APU to send power gate message
when dpm is disabled
[Public]
-----Original Message-----
From: Lazar, Lijo <lijo.la...@amd.com>
Sent: Monday, December 6, 2021 11:41 AM
To: Yu, Lang <lang...@amd.com>; amd-gfx@lists.freedesktop.org
Cc: Deucher, Alexander <alexander.deuc...@amd.com>; Huang, Ray
<ray.hu...@amd.com>
Subject: Re: [PATCH 2/2] drm/amdgpu: allow APU to send power gate
message when dpm is disabled
On 12/6/2021 8:19 AM, Yu, Lang wrote:
[Public]
-----Original Message-----
From: Lazar, Lijo <lijo.la...@amd.com>
Sent: Friday, December 3, 2021 5:52 PM
To: Yu, Lang <lang...@amd.com>; amd-gfx@lists.freedesktop.org
Cc: Deucher, Alexander <alexander.deuc...@amd.com>; Huang, Ray
<ray.hu...@amd.com>
Subject: Re: [PATCH 2/2] drm/amdgpu: allow APU to send power gate
message when dpm is disabled
On 12/3/2021 12:24 PM, Lang Yu wrote:
The general hw fini sequence is SMU-> ... ->SDMA-> ...
We need to send power gate message to power off SDMA(in SDMA
hw_fini()) afer dpm is disabled(in SMU hw_fini()). Allow that for APU.
This message is not right. In APUs there is no message provided by
FW to enable/disable DPM, it is done in BIOS. Rephrase to something
like after smu hw_fini is completed.
It is power on/off SDMA message. Not enable/disable DPM.
Bad choice of word :) I didn't mean FW message, it was about this line
in "commit message" - "afer dpm is disabled".
Ok. I got it.
Signed-off-by: Lang Yu <lang...@amd.com>
---
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
index 2d718c30c8eb..285a237f3605 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
@@ -277,7 +277,7 @@ static int smu_dpm_set_power_gate(void *handle,
struct smu_context *smu = handle;
int ret = 0;
- if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) {
+ if (!smu->pm_enabled || (!smu->is_apu &&
+!smu->adev->pm.dpm_enabled)) {
This check was there before also, only the WARN is added. That means
it was skipping sending messages in APUs also and so far this was
working fine (until this gets noticed because of the warning).
Now this would try to send the message to APU without any check.
That doesn't look good. Ideal way should be to fix the sequence.
Otherwise, suggest to do something like below as the last step of
smu hw cleanup rather than sending the message blindly.
if (smu->is_apu)
smu->pm.dpm_enabled = smu_is_dpm_running(smu);
smu_is_dpm_running(smu) will cause errors in suspend.
That is interesting. What is the error you get?
[drm:amdgpu_dpm_enable_uvd [amdgpu]] *ERROR* Dpm enable uvd failed, ret =
-95 That means EOPNOTSUPP.
Actually, in resume process, but adev->in_suspend is still true.
For Renoir series APU, smu_is_dpm_running is hardcoded as following,
static bool renoir_is_dpm_running(struct smu_context *smu) {
struct amdgpu_device *adev = smu->adev;
/*
* Until now, the pmfw hasn't exported the interface of SMU
* feature mask to APU SKU so just force on all the feature
* at early initial stage.
*/
if (adev->in_suspend)
return false;
else
Renoir suspend shouldn't be a special case. FW should keep running with
features enabled after driver suspend. Could you try with a return true all
the time for this?
That worked.
But we just send an IP power on/off message here.
Do we really need dpm running?
Yes, but it is a power management message. From a FW perspective, power
management starts when DPM is enabled. Without that, it's not bothered
about any power management features. Only a few non-PM related messages
like i2c table transfer etc. work when it is not enabled. Usually for
APUs, DPM gets enabled early through BIOS and driver doesn't have much
control.
If dpm_enabled is not causing any SW logical errors, better to keep it
coherent with FW DPM for swsmu based ASICs.
Thanks,
Lijo
Regards,
Lang
Thanks,
Lijo
return true;
}
So we got such an error.
Regards,
Lang
Thanks,
Lijo
Here we just send some IP power on/off messages.
Is it necessary to enable DPM to send such messages?
Regards,
Lang
Thanks,
Lijo
dev_WARN(smu->adev->dev,
"SMU uninitialized but power %s requested for %u!\n",
gate ? "gate" : "ungate", block_type);