My question is, why is this problem only seen during module unload? Why
aren't we seeing HWS hangs due to GFX_OFF all the time in normal
operations? For example when the GPU is idle and a new KFD process is
started, creating a new runlist. Are we just getting lucky because the
process first has to allocate some memory, which maybe makes some HW
access (flushing TLBs etc.) that wakes up the GPU?
Regards,
Felix
Am 2022-01-26 um 01:43 schrieb Yin, Tianci (Rico):
[AMD Official Use Only]
Thanks Kevin and Felix!
In gfxoff state, the dequeue request(by cp register writing) can't
make gfxoff exit, actually the cp is powered off and the cp register
writing is invalid, doorbell registers writing(regluar way) or
directly request smu to disable gfx powergate(by invoking
amdgpu_gfx_off_ctrl) can trigger gfxoff exit.
I have also tryed
amdgpu_dpm_switch_power_profile(adev,PP_SMC_POWER_PROFILE_COMPUTE,false),
but it has no effect.
[10386.162273] amdgpu: cp queue pipe 4 queue 0 preemption failed
[10671.225065] amdgpu: mmCP_HQD_ACTIVE : 0xffffffff
[10386.162290] amdgpu: mmCP_HQD_HQ_STATUS0 : 0xffffffff
[10386.162297] amdgpu: mmCP_STAT : 0xffffffff
[10386.162303] amdgpu: mmCP_BUSY_STAT : 0xffffffff
[10386.162308] amdgpu: mmRLC_STAT : 0xffffffff
[10386.162314] amdgpu: mmGRBM_STATUS : 0xffffffff
[10386.162320] amdgpu: mmGRBM_STATUS2: 0xffffffff
Thanks again!
Rico
------------------------------------------------------------------------
*From:* Kuehling, Felix <felix.kuehl...@amd.com>
*Sent:* Tuesday, January 25, 2022 23:31
*To:* Wang, Yang(Kevin) <kevinyang.w...@amd.com>; Yin, Tianci (Rico)
<tianci....@amd.com>; amd-gfx@lists.freedesktop.org
<amd-gfx@lists.freedesktop.org>
*Cc:* Grodzovsky, Andrey <andrey.grodzov...@amd.com>; Chen, Guchun
<guchun.c...@amd.com>
*Subject:* Re: [PATCH] drm/amdgpu: Fix an error message in rmmod
I have no objection to the change. It restores the sequence that was
used before e9669fb78262. But I don't understand why GFX_OFF is causing
a preemption error during module unload, but not when KFD is in normal
use. Maybe it's because of the compute power profile that's normally set
by amdgpu_amdkfd_set_compute_idle before we interact with the HWS.
Either way, the patch is
Acked-by: Felix Kuehling <felix.kuehl...@amd.com>
Am 2022-01-25 um 05:48 schrieb Wang, Yang(Kevin):
>
> [AMD Official Use Only]
>
>
> [AMD Official Use Only]
>
>
> the issue is introduced in following patch, so add following
> information is better.
> /fixes: (e9669fb78262) drm/amdgpu: Add early fini callback/
> /
> /
> Reviewed-by: Yang Wang <kevinyang.w...@amd.com>
> /
> /
> Best Regards,
> Kevin
>
> ------------------------------------------------------------------------
> *From:* amd-gfx <amd-gfx-boun...@lists.freedesktop.org> on behalf of
> Tianci Yin <tianci....@amd.com>
> *Sent:* Tuesday, January 25, 2022 6:03 PM
> *To:* amd-gfx@lists.freedesktop.org <amd-gfx@lists.freedesktop.org>
> *Cc:* Grodzovsky, Andrey <andrey.grodzov...@amd.com>; Yin, Tianci
> (Rico) <tianci....@amd.com>; Chen, Guchun <guchun.c...@amd.com>
> *Subject:* [PATCH] drm/amdgpu: Fix an error message in rmmod
> From: "Tianci.Yin" <tianci....@amd.com>
>
> [why]
> In rmmod procedure, kfd sends cp a dequeue request, but the
> request does not get response, then an error message "cp
> queue pipe 4 queue 0 preemption failed" printed.
>
> [how]
> Performing kfd suspending after disabling gfxoff can fix it.
>
> Change-Id: I0453f28820542d4a5ab26e38fb5b87ed76ce6930
> Signed-off-by: Tianci.Yin <tianci....@amd.com>
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> index b75d67f644e5..77e9837ba342 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> @@ -2720,11 +2720,11 @@ static int amdgpu_device_ip_fini_early(struct
> amdgpu_device *adev)
> }
> }
>
> - amdgpu_amdkfd_suspend(adev, false);
> -
> amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE);
> amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE);
>
> + amdgpu_amdkfd_suspend(adev, false);
> +
> /* Workaroud for ASICs need to disable SMC first */
> amdgpu_device_smu_fini_early(adev);
>
> --
> 2.25.1
>
