[Public] > -----Original Message----- > From: Lyude Paul <ly...@redhat.com> > Sent: Wednesday, March 16, 2022 8:48 AM > To: Lin, Wayne <wayne....@amd.com> > Cc: dri-de...@lists.freedesktop.org; amd-gfx@lists.freedesktop.org > Subject: Re: [PATCH] WIP: drm/dp_mst: Add support for dumping topology ref > histories from debugfs > > (Adding this back to the dri-devel mailing list since I didn't notice it got > dropped from there) > > Hm, some comments on this issue down below. Sorry for the delayed response, I > was going to try this right after I finished the MST legacy removal but that's > ending up taking longer than I hoped. > > On Tue, 2022-03-08 at 01:46 +0000, Lin, Wayne wrote: > > [AMD Official Use Only] > > > > Oops... > > I didn't notice that I replied to wrong mail previously : P > > Sorry for the confusion and reply to the correct thread. > > > > Good day! > > I probably know why you can't reproduce the issue there. Please refer to the > > attached > > patch file which makes me easier to explain this. > > > > In dm_dp_mst_get_modes(), we will create a new dc_sink by calling > > dc_link_add_remote_sink() and add that dc_sink into the array dc_link- > > >remote_sinks[]. > > However, if we find that aconnector->dc_sink is not null, then we won't > > create a new > > dc_sink for that aconnector and won't add the sink to the array dc_link- > > >remote_sinks[]. > > > > When the issue that I mentioned before occurs, we won't be able to release > > the dc_sink > > for the aconnector when we unplug the sst monitor. Hence, we can't create > > new dc_sink > > for the latter on connected new stream sink of that port. Which leads to two > > issues > > 1. Unplug monitor and plug in another monitor "to the same port" > > => Since we use the same dc_sink to reflect the capability of the new > > connected stream > > sink, we might send out inappropriate stream to the new connected sink. > > 2. Because we can't release dc_sink in the array dc_link->remote_sinks[], > > when we > > plug/unplug sst monitor to more than 4 different mst port, we will break the > > criteria > > "dc_link->sink_count >= MAX_SINKS_PER_LINK" in > > link_add_remote_sink_helper(). > > Ok, a lot of this seems to be happening in amdgpu which certainly explains why > I had so much trouble following along with this originally (also, having > learned a bit more about how DC works definitely has helped a bit). I already > see a bunch of issues though with how this code is structured that would > definitely break things, though note I haven't sat down and tried this on a > real machine yet - will try tomorrow. > > So - it seems like dc_sink == a bunch of hotplugging state for a dm connector, > which actually tells me for one that this is definitely the wrong spot for > this code. get_modes() really should just handle filling out DRM modes and > pretty much nothing else, because callers from DRM aren't going to expect > side-effects like this when get_modes() is called - which could potentially > lead to all sorts of weirdness down the line if the DRM call paths that use > this ever change. i915 and nouveau have good examples of what these functions > should typically look like, and amdgpu actually seems to mostly follow this > advice for it's other get_modes() callback. > > Note there's also another problem here: the assumption "no EDID == > disconnected" isn't correct. It's totally possible to run into EDID-less > displays if the display is some ancient pre-historic relic, or if the ROM (or > EEPROM? can't remember what type of chip computer displays tend to use...) > chip > in the monitor containing the EDID has died. Note that the second situation is > suprisingly more common then one might think! I ran into a 140Hz 4k ASUS > display where this happened, and I know another friend of mine who had the ROM > in their display die randomly as well. > > So with this being said: I, think the solution here is actually just to > add/remove dc_sink from dm_dp_mst_detect() based on the CSN, and drop the > calls from get_modes()? detect() should always be called before the connector > has been removed, and we could use the return status from > drm_dp_mst_detect_port() in order to tell whether or not we should add/remove > the dc_sink.
Thank you Lyude for guiding me through! After your elaboration, I think I roughly know the idea from drm perspective now. Let me get through this and will get back to you. > > If you don't get to it first tomorrow, I'll see if I can reproduce this > locally and try writing up a patch. > > Also a final note: I don't think it's a good idea in general for there to be a > fixed size array of dc_sinks like this. Those probably should just be stored > somehow on a per-connector basis. I say this because in addition to the fact Understand and agree with that. I plan to remove the constraint as well. Thanks! > MST connectors aren't destroyed immediately (which could lead to a situation > where we have more then 6 connected MST ports briefly before their destructors > run, e.g. during suspend/resume reprobing). > > Also, one question below: > > > > Anyway, these are my steps to reproduce the issue. > > I use a startech mst 1to4 mst hub, a sst monitor and a mst monitor. > > > > 1. boot up with sst monitor connected to the hub and plug the hub to the > > system. > > 2. unplug/plug sst monitor to all left three different DP output ports. > > Which is used to > > Pollute all four aconnectors to have them keep the stale dc_sinks. > > 3. plug in the mst monitor to arbitrary ports. Since the new connected mst > > monitor will > > have us add new mst port to the topology and attach a new aconnector for > > that mst port, > > we'll try to create a new dc_sink to that new aconnector and break the > > sink_count > > limitation. As you can see in the log the error message : "*ERROR* Unable to > > add a > > remote sink" > > > > (Note that different hub might influence the result. Some hubs will pull > > down the HPD > > when there is no monitor connected to its downstream ports which will run > > into different > > code flow) > > by "pull down" I assume you mean doing a long HPD instead of short (or vice > versa?). Yes, long HPD! Thanks for your help Lyude! > > > > > I also attach the dmesg log under different debug level (0x104 & 0x116) for > > your reference. > > > > Please let me know if you can reproduce then : ) > > > > Sorry about that Lyude and hope this time I send to the right thread.. > > Really appreciate for your help!!! > > > > Regards, > > Wayne > > > -----Original Message----- > > > From: Lyude Paul <ly...@redhat.com> > > > Sent: Wednesday, March 2, 2022 9:10 AM > > > To: Lin, Wayne <wayne....@amd.com> > > > Subject: Re: [PATCH] WIP: drm/dp_mst: Add support for dumping topology ref > > > histories from debugfs > > > > > > Ran into some issues with my system yesterday (hooray being the first to > > > find > > > a rather annoying zsh bug that broke my scripts!), but I've finally got > > > things > > > setup. I'm not able to reproduce this issue though (I've tried hotplugging > > > the > > > way you mentioned here, but nothing seems to leak), which makes me think > > > there's something special in your setup we might not have noticed. > > > > > > Do you think you could get some drm logs with drm.debug=0x116 > > > log_buf_len=50M > > > from when this happens so I can get a better idea of the drm events > > > leading up > > > to this? Also, if you've been testing this in a GUI could you confirm > > > whether > > > this happens when you're just in a plain old VT? > > > > > > On Mon, 2022-02-28 at 16:43 -0500, Lyude Paul wrote: > > > > Alright - starting to look into this now and setting up a system to try > > > > reproducing this, will let you know as soon as I've got results. Sorry > > > > again > > > > about all of the delays > > > > > > > > On Fri, 2022-02-25 at 15:47 -0500, Lyude Paul wrote: > > > > > I didn't get a chance yet, but I've gotten through most of my backlog > > > > > now. > > > > > Sorry about the delay - I've been catching up since I had to take two > > > > > weeks > > > > > off work very unexpectedly. I'll put aside time to look at this first > > > > > thing > > > > > monday. > > > > > > > > > > On Fri, 2022-02-25 at 01:33 +0000, Lin, Wayne wrote: > > > > > > [AMD Official Use Only] > > > > > > > > > > > > Hi Lyude, > > > > > > > > > > > > Good day! > > > > > > Sorry to bother you, but would like to know if you can reproduce the > > > > > > issue? > > > > > > > > > > > > Thanks! > > > > > > > > > > > > Regards, > > > > > > Wayne > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: Lyude Paul <ly...@redhat.com> > > > > > > > Sent: Thursday, February 3, 2022 4:12 AM > > > > > > > To: Lin, Wayne <wayne....@amd.com> > > > > > > > Cc: dri-de...@lists.freedesktop.org > > > > > > > Subject: Re: [PATCH] WIP: drm/dp_mst: Add support for dumping > > > > > > > topology > > > > > > > ref > > > > > > > histories from debugfs > > > > > > > > > > > > > > JFYI I should be able to respond to this soon, I think I'm > > > > > > > following > > > > > > > your > > > > > > > issue a bit more (haven't gotten to go through the patches too so > > > > > > > I'm > > > > > > > probably > > > > > > > going to see if I can reproduce it locally as well. Sorry for the > > > > > > > delay > > > > > > > - > > > > > > > dealing with some X.org stuff and work issues at the moment > > > > > > > > > > > > > > On Tue, 2022-01-25 at 08:32 +0000, Lin, Wayne wrote: > > > > > > > > [Public] > > > > > > > > > > > > > > > > Hey Lyude, > > > > > > > > > > > > > > > > Sorry, just got chance to get back to this and BIG THANKS to > > > > > > > > elaborating > > > > > > > > in > > > > > > > > such details! > > > > > > > > Following are some of my comments : ) > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > From: Lyude Paul <ly...@redhat.com> > > > > > > > > > Sent: Wednesday, January 19, 2022 9:59 AM > > > > > > > > > To: Lin, Wayne <wayne....@amd.com> > > > > > > > > > Cc: dri-de...@lists.freedesktop.org > > > > > > > > > Subject: Re: [PATCH] WIP: drm/dp_mst: Add support for dumping > > > > > > > > > topology > > > > > > > > > ref > > > > > > > > > histories from debugfs > > > > > > > > > > > > > > > > > > Hey - so, the original issue here was that payloads were not > > > > > > > > > always > > > > > > > > > deleted when we expected them to be - correct? > > > > > > > > > > > > > > > > Actually, what I was trying to do is not relevant to payload > > > > > > > > maintenance. > > > > > > > > What I wanted to do is having a way to notify > > > > > > > > amdgpu to release its enumerated resource "dc_sink" when unplug > > > > > > > > event > > > > > > > > occurs. Currently, under specific scenarios, > > > > > > > > we can't release remote "dc_sink" and ends up can't allocate > > > > > > > > resource > > > > > > > > for > > > > > > > > new connected monitors. I'll explain the scenario > > > > > > > > underneath. > > > > > > > > > > > > > > > > So, get back to the main issue that I was trying to solve when I > > > > > > > > pushed > > > > > > > > the > > > > > > > > patchset: > > > > > > > > > > > > https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.kernel.org%2Fproject%2Fdri&data=04%7C01%7Cw > ayne.lin%40amd.com%7Cd77e829cfd3a466e25e508da06e6a9dd%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637829885024 > 474689%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sda > ta=MvKilTT1CkBqZVK1N24JyNPjiPYORV%2FsCwvEzwx%2FIAk%3D&reserved=0 > > > ayne.lin%40amd.com%7Cbbc27043edc04bf8067c08d9fbe9620c%7C3dd8961fe4884e608e > > > 11a82d994e183d%7C0%7C0%7C6378178020798 > > > 98960%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6 > > > Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdat > > > a=RVUc8KgTO3mhFL9qemshHJqiyXJs%2Fvytx21AMyUaW%2Bs%3D&reserved=0 > > > > > > > > - > > > > > > > devel%2Fcover%2F20210720160342.11415-1- > > > > > > > Wayne.Lin%40amd.com%2F&data=04%7C01%7Cwayne.lin%40amd.com%7C2e > > > > > > > 19d9 > > > > > > > 32 > > > > > > > 1b > > > > > > > 5f4e948c1208d9e6884f24%7C3dd8961fe488 > > > > > > > 4e608e11a82d994e183d%7C0%7C0%7C637794295422403301%7CUnknown%7CTWFp > > > > > > > bGZs > > > > > > > b3 > > > > > > > d8 > > > > > > > eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiL > > > > > > > CJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=rvtwQioO3pT1BoHb7S5 > > > > > > > 32ms > > > > > > > Ra > > > > > > > 61 > > > > > > > gP1vIyE8AB7M9I4E%3D&reserved=0 > > > > > > > > > > > > > > > > I was trying to fix some problems that I observed after these 2 > > > > > > > > patches > > > > > > > > * 09b974e8983 drm/amd/amdgpu_dm/mst: Remove - > > > > > > > > >destroy_connector() > > > > > > > > callback > > > > > > > > * 72dc0f51591 drm/dp_mst: Remove > > > > > > > > drm_dp_mst_topology_cbs.destroy_connector > > > > > > > > > > > > > > > > With above patches, it changes our flow to remove dc_sink (by > > > > > > > > calling > > > > > > > > dc_link_remote_sink()) when connector is about to be > > > > > > > > destroyed. And let's see below use cases: > > > > > > > > a). Disconnection happens between mst branch devices > > > > > > > > e.g. > > > > > > > > src - 1st_mstb - 2nd_mstb - sst_monitor => src - 1st_mstb > > > > > > > > (disconnect) > > > > > > > > 2nd_mstb - sst_monitor > > > > > > > > > > > > > > > > In above case, after receiving CSN, we will put topology > > > > > > > > reference > > > > > > > > count > > > > > > > > of > > > > > > > > 2nd mstb and its port which connected to the sst monitor. > > > > > > > > As you suggested before, we will destroy 2nd mst branch device > > > > > > > > and > > > > > > > > its > > > > > > > > all > > > > > > > > ports due to there is no more mst path can route to them. > > > > > > > > As the result of that, we at end call > > > > > > > > drm_dp_delayed_destroy_port() > > > > > > > > and > > > > > > > > unregister/put the drm connector and eventually call > > > > > > > > dc_link_remote_sink() to release the dc_sinck we enumerate for > > > > > > > > the > > > > > > > > specific > > > > > > > > stream sink of sst_monitor. > > > > > > > > > > > > > > > > However, in below case: > > > > > > > > b). Disconnection happens between mst branch devices and SST > > > > > > > > monitor > > > > > > > > e.g. > > > > > > > > src - 1st_mstb - sst_monitor => src - 1st_mstb (disconnect) > > > > > > > > sst_monitor > > > > > > > > > > > > > > > > In this case, which is the case having problem, it definitely > > > > > > > > won't > > > > > > > > decrease > > > > > > > > the topology references count of the port of 1st_mstb which > > > > > > > > was connected to the sst monitor to zero since the port is still > > > > > > > > existing in > > > > > > > > the topology. Same as the malloc reference since the port can't > > > > > > > > get > > > > > > > > destroyed. Hence, the port still exists and we won't call > > > > > > > > drm_dp_delayed_destroy_port() to unregister and put the drm > > > > > > > > connector. > > > > > > > > As > > > > > > > > the > > > > > > > > result of that, we can't release corresponding remote dc_sink > > > > > > > > under > > > > > > > > this > > > > > > > > case. And after few times hotplugs, we can't create any new > > > > > > > > dc_sink since the number of stream sink is exceeding our > > > > > > > > limitation. > > > > > > > > > > > > > > > > Hence, what I'm thinking here is to register a callback function > > > > > > > > for > > > > > > > > notifying us that the remote sink is detached. This just aligns > > > > > > > > what > > > > > > > > we > > > > > > > > do > > > > > > > > for handling long HPD event (unplug monitor from system) of > > > > > > > > legacy > > > > > > > > DP > > > > > > > > (none > > > > > > > > mst). For which case, once we detect long HPD event > > > > > > > > indicating the monitor is detached, we will immediately try to > > > > > > > > release > > > > > > > > the > > > > > > > > dc_link->local_sink and fire hotplug event to upper layer. > > > > > > > > Same as here, once receives a CSN message notifying a drm > > > > > > > > connector > > > > > > > > is > > > > > > > > changed from connected to disconnected, trigger the callback > > > > > > > > function and we can try to release the dc_sink resource. > > > > > > > > > > > > > > > > > > > > > > > > > > If I'm remembering that correctly, then (and I'm not 100% sure > > > > > > > > > on > > > > > > > > > this > > > > > > > > > yet) I might already have noticed something very possibly > > > > > > > > > wonky in > > > > > > > > > how we handle payload allocations currently, that I found > > > > > > > > > while > > > > > > > > > working on > > > > > > > > > the non-atomic removal branch that I linked to you in my > > > > > > > > > previous response. Basically, in the > > > > > > > > > step1() function it looks like that we follow this general > > > > > > > > > flow > > > > > > > > > with > > > > > > > > > updating > > > > > > > > > payloads: > > > > > > > > > > > > > > > > > > * Loop through proposed payloads and compare to previously > > > > > > > > > programmed > > > > > > > > > payloads > > > > > > > > > - If a payload has a different allocation then it > > > > > > > > > previously > > > > > > > > > did, > > > > > > > > > update the > > > > > > > > > payload > > > > > > > > > - If the payload is new, create it > > > > > > > > > - If a payload no longer has an allocation, remove the > > > > > > > > > payload > > > > > > > > > > > > > > > > > > At first glance this seems totally correct - but I'm not > > > > > > > > > actually > > > > > > > > > entirely > > > > > > > > > convinced it is? Particularly because it seems like the order > > > > > > > > > in > > > > > > > > > which > > > > > > > > > we do creation/deletion of payloads is totally arbitrary. To > > > > > > > > > explain > > > > > > > > > what > > > > > > > > > I mean by that, consider a state transition like this: > > > > > > > > > > > > > > > > > > vcpi_slots=15 vcpi_slots=35 vcpi_slots=14 > > > > > > > > > > 1 | 2 |xxxxxxxx| > > > > > > > > > > > > > > > > > > Let's say we want to increase payload #1 from 15 to 50, and > > > > > > > > > disable > > > > > > > > > payload #2 in the same atomic commit on DRM's side. If the > > > > > > > > > order > > > > > > > > > we > > > > > > > > > update payloads is entirely arbitrary, we could end up doing > > > > > > > > > this: > > > > > > > > > > > > > > > > > > * Increase VCPI slots payload #1 from 15->50 (total VCPI > > > > > > > > > slots=99, > > > > > > > > > overflow!) > > > > > > > > > * Decrease VCPI slots payload #2 from 35->0 (total VCPI > > > > > > > > > slots=50) > > > > > > > > > > > > > > > > > > Notice on the first step, we've technically overflowed the > > > > > > > > > available > > > > > > > > > number of VCPI slots in the payload table. This is still > > > > > > > > > before > > > > > > > > > step > > > > > > > > > 2 > > > > > > > > > though, and I could be totally wrong here - perhaps this is > > > > > > > > > entirely > > > > > > > > > OK in > > > > > > > > > the real world, and we're allowed to overflow VC slots as long > > > > > > > > > as > > > > > > > > > > > > > > > > I think it's forbidden to allocate time slots beyond 64 when > > > > > > > > we're > > > > > > > > updating > > > > > > > > payload ID table of the branch in the real world. Branch > > > > > > > > probably > > > > > > > > will NACK the DPCD write. > > > > > > > > > > > > > > > > > we repair the issue before step 2. But so far I can't seem to > > > > > > > > > find > > > > > > > > > anything in the DP 2.0 spec that explicitly states this would > > > > > > > > > be > > > > > > > > > OK > > > > > > > > > - > > > > > > > > > which > > > > > > > > > makes me think we might fail some payload allocations if we > > > > > > > > > don't > > > > > > > > > always > > > > > > > > > ensure we avoid overflows in between VC payload table changes > > > > > > > > > > > > > > > > Agree. > > > > > > > > For amdgpu, I think we always do deallocation (call hws- > > > > > > > > > funcs.reset_hw_ctx_wrap()) before allocation > > > > > > > > (apply_single_controller_ctx_to_hw()). > > > > > > > > > > > > > > > > > Note that avoiding overflows would be as simple as just making > > > > > > > > > sure > > > > > > > > > we > > > > > > > > > send all VC payload table changes that free VC slots before > > > > > > > > > sending > > > > > > > > > any that take new slots. > > > > > > > > > > > > > > > > > > Again - I haven't actually confirmed this yet and am hoping to > > > > > > > > > test > > > > > > > > > stuff > > > > > > > > > like this very soon as I'm pretty close finishing up the > > > > > > > > > initial > > > > > > > > > attempt > > > > > > > > > at removing the non-atomic MST code in the DRM helpers now. If > > > > > > > > > my > > > > > > > > > theory > > > > > > > > > ends up being correct here, I can fix this in my rewrite of > > > > > > > > > the > > > > > > > > > MST payload management code. But I figured it might be worth > > > > > > > > > mentioning in > > > > > > > > > the mean time in case you think it might be relevant to the > > > > > > > > > problem here :). > > > > > > > > > > > > > > > > > > On Wed, 2022-01-12 at 16:47 -0500, Lyude Paul wrote: > > > > > > > > > > (CC'ing this to dri-devel, since this is basically patch > > > > > > > > > > review) > > > > > > > > > > > > > > > > > > > > Alright - so first off sorry about the broken debugging > > > > > > > > > > patch! I > > > > > > > > > > thought I had tested that but I guess I hadn't tested it > > > > > > > > > > well > > > > > > > > > > enough, > > > > > > > > > > I'll get it fixed asap, but feel free to try getting to it > > > > > > > > > > before > > > > > > > > > > I > > > > > > > > > > do. > > > > > > > > > > > > > > > > > > > > As for this patch... (comments below) > > > > > > > > > > > > > > > > > > > > On Mon, 2021-12-20 at 02:17 +0000, Lin, Wayne wrote: > > > > > > > > > > > [AMD Official Use Only] > > > > > > > > > > > > > > > > > > > > > > Hi Lyude, > > > > > > > > > > > > > > > > > > > > > > No rush and thanks for your time! : ) Just want to help > > > > > > > > > > > clarify > > > > > > > > > > > what > > > > > > > > > > > I mean that "registering a callback function" > > > > > > > > > > > for CSN of disconnecting > > > > > > > > > > > stream sink device (not mst branch case). Attach below the > > > > > > > > > > > tentative > > > > > > > > > > > patch that I planned to do. Thanks so much! > > > > > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > > Wayne > > > > > > > > > > > --- > > > > > > > > > > > .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 53 > > > > > > > > > > > +++++++++++++++++++ > > > > > > > > > > > drivers/gpu/drm/drm_dp_mst_topology.c | 16 +++++- > > > > > > > > > > > include/drm/drm_dp_mst_helper.h | 1 + > > > > > > > > > > > 3 files changed, 68 insertions(+), 2 deletions(-) > > > > > > > > > > > > > > > > > > > > > > diff --git > > > > > > > > > > > a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_type > > > > > > > > > > > s.c > > > > > > > > > > > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_type > > > > > > > > > > > s.c > > > > > > > > > > > index cc34a35d0bcb..d7343c64908c 100644 > > > > > > > > > > > --- > > > > > > > > > > > a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_type > > > > > > > > > > > s.c > > > > > > > > > > > +++ > > > > > > > > > > > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_type > > > > > > > > > > > s.c > > > > > > > > > > > @@ -472,8 +472,61 @@ dm_dp_add_mst_connector(struct > > > > > > > > > > > drm_dp_mst_topology_mgr *mgr, > > > > > > > > > > > return connector; > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > +void dm_dp_notify_csn_disconnection(struct drm_connector > > > > > > > > > > > +*connector) { > > > > > > > > > > > + struct amdgpu_dm_connector *aconnector = > > > > > > > > > > > + to_amdgpu_dm_connector(connector); > > > > > > > > > > > + struct dc_sink *dc_sink = aconnector->dc_sink; > > > > > > > > > > > + struct dc_link *dc_link = aconnector->dc_link; > > > > > > > > > > > + struct amdgpu_device *adev = drm_to_adev(ddev); > > > > > > > > > > > + > > > > > > > > > > > + ASSERT(dc_link); > > > > > > > > > > > + > > > > > > > > > > > + if (dc_sink) { > > > > > > > > > > > + mutex_lock(&adev->dm.dc_lock); > > > > > > > > > > > + > > > > > > > > > > > + /*clear the remote sink of the link*/ > > > > > > > > > > > + dc_link_remove_remote_sink(dc_link, > > > > > > > > > > > dc_sink); > > > > > > > > > > > + dc_sink_release(dc_sink); > > > > > > > > > > > + aconnector->dc_sink = NULL; > > > > > > > > > > > + > > > > > > > > > > > + mutex_unlock(&adev->dm.dc_lock); > > > > > > > > > > > + } > > > > > > > > > > > +} > > > > > > > > > > > + > > > > > > > > > > > static const struct drm_dp_mst_topology_cbs dm_mst_cbs = > > > > > > > > > > > { > > > > > > > > > > > .add_connector = dm_dp_add_mst_connector, > > > > > > > > > > > + .notify_csn_disconnection = > > > > > > > > > > > dm_dp_notify_csn_disconnection, > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > I still don't really think this is a good idea. This seems > > > > > > > > > > like > > > > > > > > > > it's > > > > > > > > > > just adding another hotplugging path to the code in order to > > > > > > > > > > avoid > > > > > > > > > > sending hotplugs for non-endpoint devices. In addition to > > > > > > > > > > the > > > > > > > > > > > > > > > > So, what I wanted to do is to add a callback function for > > > > > > > > endpoint > > > > > > > > devices > > > > > > > > case as described above. For disconnection of non-endpoint > > > > > > > > devices > > > > > > > > is > > > > > > > > already taken care by current code. > > > > > > > > > > > > > > > > > > drm_connector issues I mentioned before, we also really need > > > > > > > > > > to > > > > > > > > > > stop > > > > > > > > > > doing any kind of payload maintence in hotplugging paths. > > > > > > > > > > The > > > > > > > > > > reality > > > > > > > > > > is any kind of payload maintanence we do outside of normal > > > > > > > > > > modesetting > > > > > > > > > > paths is a relic from legacy modesetting that I'm dropping > > > > > > > > > > ASAP > > > > > > > > > > (more > > > > > > > > > > on this below), and we can't keep adding to it because it > > > > > > > > > > dramatically > > > > > > > > > > complicates maintanence as well. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Sorry for repeating this point so often but - the biggest > > > > > > > > > > issue > > > > > > > > > > too > > > > > > > > > > is > > > > > > > > > > I'm still not sure what it is we're even avoiding here. We > > > > > > > > > > know > > > > > > > > > > resources aren't released consistently, and that we're able > > > > > > > > > > to > > > > > > > > > > reproduce the behavior with repeated hotplugs. We also know > > > > > > > > > > that > > > > > > > > > > if > > > > > > > > > > we > > > > > > > > > > skip sending certain hotplug events, that fixes the issue. > > > > > > > > > > And > > > > > > > > > > we > > > > > > > > > > know > > > > > > > > > > we can workaround it by adding a special case for forcing a > > > > > > > > > > payload > > > > > > > > > > release in DC. But none of those actually tell us exactly > > > > > > > > > > what > > > > > > > > > > piece > > > > > > > > > > of code is leaking and why, which means that any workarounds > > > > > > > > > > we're > > > > > > > > > > putting in to avoid this mysterious guilty section of code > > > > > > > > > > we > > > > > > > > > > don't > > > > > > > > > > entirely understand either - which means we're just adding > > > > > > > > > > more > > > > > > > > > > code > > > > > > > > > > in that no one actually fully understands. This just ends up > > > > > > > > > > making > > > > > > > > > > maintence difficult because every change in code nearby > > > > > > > > > > workarounds > > > > > > > > > > like this has to strugle to try to figure out said > > > > > > > > > > workarounds > > > > > > > > > > in > > > > > > > > > > order to avoid breaking things. > > > > > > > > > > > > > > > > Thank you Lyude for the reminder and I totally agree with you by > > > > > > > > avoiding > > > > > > > > adding workaround since it will get the code maintenance harder. > > > > > > > > And > > > > > > > > I > > > > > > > > think the root cause of the issue that I observed before is > > > > > > > > quite > > > > > > > > concrete. > > > > > > > > There is no code path for us to release dc_sink under the unplug > > > > > > > > scenario > > > > > > > > that I described above. > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm actually currently running into these "later" issues > > > > > > > > > > right > > > > > > > > > > now, > > > > > > > > > > as > > > > > > > > > > recently I've (-actively-, finally!!!) been working on > > > > > > > > > > trying to > > > > > > > > > > remove as much non-atomic MST as I can because. As it turns > > > > > > > > > > out > > > > > > > > > > - > > > > > > > > > > a > > > > > > > > > > huge amount of the payload maintanence code just isn't > > > > > > > > > > needed at > > > > > > > > > > all > > > > > > > > > > when we stop caring about non-atomic drivers and stick > > > > > > > > > > everything > > > > > > > > > > in > > > > > > > > > > atomic state structs. Step 1 for updating updating the > > > > > > > > > > payload > > > > > > > > > > table, > > > > > > > > > > e.g. drm_dp_update_payload_part1(), is a great example of > > > > > > > > > > how > > > > > > > > > > messy > > > > > > > > > > things have become. Here's a small sample of some of the > > > > > > > > > > stuff > > > > > > > > > > I've > > > > > > > > > > seen from just that one function so far that either just > > > > > > > > > > don't > > > > > > > > > > make > > > > > > > > > > sense here or is totally redundant. I should note that a lot > > > > > > > > > > of > > > > > > > > > > these > > > > > > > > > > things also come from patches I reviwed, but didn't really > > > > > > > > > > look > > > > > > > > > > at > > > > > > > > > > as > > > > > > > > > > closely as I should have because I was swamped at work, some > > > > > > > > > > are > > > > > > > > > > historical artifacts, and others are less-than-ideal patches > > > > > > > > > > I > > > > > > > > > > got > > > > > > > > > > wrote myself when I was first started working on MST and > > > > > > > > > > didn't > > > > > > > > > > know > > > > > > > > > > the code as well as I do > > > > > > > > > > now: > > > > > > > > > > > > > > > > > > > > * We try to avoid some sort of userspace issue by using > > > > > > > > > > drm_dp_mst_port_downstream_of_branch() to avoid releasing > > > > > > > > > > payloads > > > > > > > > > > for a > > > > > > > > > > branch if we can't prove it's downstream of the top of > > > > > > > > > > the > > > > > > > > > > topology. This > > > > > > > > > > seems to workaround either a userspace bug. This is a > > > > > > > > > > redundant, > > > > > > > > > > since > > > > > > > > > > that's what topology refs are already supposed to be > > > > > > > > > > doing to > > > > > > > > > > the > > > > > > > > > > extent is > > > > > > > > > > reasonably possibly. It's also unfortunately racy > > > > > > > > > > solution > > > > > > > > > > because > > > > > > > > > > we have > > > > > > > > > > to be able to handle the situation where a connector is > > > > > > > > > > removed > > > > > > > > > > from under > > > > > > > > > > us. That can happen at any time, including _immediately_ > > > > > > > > > > after > > > > > > > > > > we > > > > > > > > > > call > > > > > > > > > > drm_dp_mst_port_downstream_of_branch() - rendering the > > > > > > > > > > call > > > > > > > > > > not > > > > > > > > > > really > > > > > > > > > > useful. > > > > > > > > > > * If we fail to validate the sink in > > > > > > > > > > drm_dp_update_payload_part, > > > > > > > > > > we > > > > > > > > > > don't > > > > > > > > > > update the payload table. I think at best this solution > > > > > > > > > > is > > > > > > > > > > racy > > > > > > > > > > and > > > > > > > > > > not > > > > > > > > > > useful, at worst it leaves us with a payload table that > > > > > > > > > > doesn't > > > > > > > > > > match what > > > > > > > > > > we attempted to set in the atomic state - which at worst > > > > > > > > > > brings > > > > > > > > > > us > > > > > > > > > > into > > > > > > > > > > undefined territory where we're just plain out of sync > > > > > > > > > > with > > > > > > > > > > the > > > > > > > > > > reality in > > > > > > > > > > hw. > > > > > > > > > > * Actually fun fact - mgr->payloads and mgr->proposed_vcpis > > > > > > > > > > both > > > > > > > > > > can > > > > > > > > > > and > > > > > > > > > > definitely should be removed entirely. All of the info > > > > > > > > > > for > > > > > > > > > > mgr->payloads > > > > > > > > > > could just be in the atomic state, because that + the > > > > > > > > > > magic > > > > > > > > > > of > > > > > > > > > > atomic state > > > > > > > > > > duplication means we'll also have an accurate view of the > > > > > > > > > > previous > > > > > > > > > > state's > > > > > > > > > > payload allocations: which renders mgr->proposed_vcpis > > > > > > > > > > redundant. > > > > > > > > > > > > > > > > > > > > Apologies for the long explanation again, but I hope that > > > > > > > > > > explains > > > > > > > > > > my > > > > > > > > > > > > > > > > Really really thanks for your kindly help on this : ) > > > > > > > > I'll try my best to get to your WIP branch soon. Thank you > > > > > > > > Lyude! > > > > > > > > > > > > > > > > > > point here a bit. I'm going to be trying to get to moving > > > > > > > > > > amdgpu's > > > > > > > > > > DSC > > > > > > > > > > code out of amdgpu and into DRM helpers as well soon, so I'm > > > > > > > > > > really > > > > > > > > > > determined to clean stuff up beforehand as every time I've > > > > > > > > > > done > > > > > > > > > > so > > > > > > > > > > it's become substantially easier to make changes to this > > > > > > > > > > code. > > > > > > > > > > Things > > > > > > > > > > used to be even worse before I started cleaning things up 2 > > > > > > > > > > or 3 > > > > > > > > > > years > > > > > > > > > > ago, where simple changes would end up getting me stuck > > > > > > > > > > spending > > > > > > > > > > hours > > > > > > > > > > trying to dig through lockdep or memory manegement issues. > > > > > > > > > > As > > > > > > > > > > well, > > > > > > > > > > I > > > > > > > > > > would be entirely unsurprised if bugs like this very payload > > > > > > > > > > leak > > > > > > > > > > we're working on just disappear once we've gotten rid of all > > > > > > > > > > the > > > > > > > > > > extraneous workarounds and state tracking here - especially > > > > > > > > > > with > > > > > > > > > > how > > > > > > > > > > many special cases we have for maintaining the payload table > > > > > > > > > > right > > > > > > > > > > now. That's certainly ended up being the case in the past > > > > > > > > > > with a > > > > > > > > > > number of other difficult to track down issues I've dealt > > > > > > > > > > with > > > > > > > > > > in > > > > > > > > > > MST. > > > > > > > > > > > > > > > > > > > > Anyhow. I've been way more productive this year then last > > > > > > > > > > because > > > > > > > > > > I > > > > > > > > > > had over a month off work and am finally not super burnt out > > > > > > > > > > from > > > > > > > > > > my > > > > > > > > > > job, and so far I've been making progress on the payload > > > > > > > > > > state > > > > > > > > > > cleanup > > > > > > > > > > far faster then I was last year :). I think if you can't > > > > > > > > > > figure > > > > > > > > > > out > > > > > > > > > > where the leak is coming from even once I get the debugging > > > > > > > > > > patches > > > > > > > > > > I > > > > > > > > > > mentioned fixed up, it might be a good idea for us to try > > > > > > > > > > again > > > > > > > > > > after > > > > > > > > > > I've got some of this code cleaned up. I've got a currently > > > > > > > > > > WIP > > > > > > > > > > branch > > > > > > > > > > here: > > > > > > > > > > > > > > > > > > > > https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitl > > > > > > > > > > ab.freedesktop.org%2Flyudess%2Flinux%2F- > > > > > > > > > > %2Fcommit%2F624dd68fa804e64b5b > > > > > > > > > > 2060e4735d7317090692b5&data=04%7C01%7Cwayne.lin%40amd.co > > > > > > > > > > m%7C > > > > > > > > > > d4 > > > > > > > > > > bd > > > > > > > > > > c7 > > > > > > > > > > 59eb274bfccc8208d9daef41fe%7C3dd8961fe4884e608e11a82d994e183 > > > > > > > > > > d%7C > > > > > > > > > > 0% > > > > > > > > > > 7C > > > > > > > > > > 0% > > > > > > > > > > 7C637781543416430632%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjA > > > > > > > > > > wMDA > > > > > > > > > > iL > > > > > > > > > > CJ > > > > > > > > > > QI > > > > > > > > > > joiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=n > > > > > > > > > > FpVl > > > > > > > > > > %2 > > > > > > > > > > BV > > > > > > > > > > oF > > > > > > > > > > 40JPabfRMcR6Cz7ZHDwt%2BBpLDBNdXftJaA%3D&reserved=0 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > void amdgpu_dm_initialize_dp_connector(struct > > > > > > > > > > > amdgpu_display_manager *dm, diff --git > > > > > > > > > > > a/drivers/gpu/drm/drm_dp_mst_topology.c > > > > > > > > > > > b/drivers/gpu/drm/drm_dp_mst_topology.c > > > > > > > > > > > index 857c5d15e81d..a70e26c5d084 100644 > > > > > > > > > > > --- a/drivers/gpu/drm/drm_dp_mst_topology.c > > > > > > > > > > > +++ b/drivers/gpu/drm/drm_dp_mst_topology.c > > > > > > > > > > > @@ -2508,6 +2508,7 @@ drm_dp_mst_handle_conn_stat(struct > > > > > > > > > > > drm_dp_mst_branch *mstb, > > > > > > > > > > > u8 new_pdt; > > > > > > > > > > > bool new_mcs; > > > > > > > > > > > bool dowork = false, create_connector = false; > > > > > > > > > > > + bool notify_unplug_event = false; > > > > > > > > > > > > > > > > > > > > > > port = drm_dp_get_port(mstb, conn_stat- > > > > > > > > > > > >port_number); > > > > > > > > > > > if (!port) > > > > > > > > > > > @@ -2520,6 +2521,9 @@ drm_dp_mst_handle_conn_stat(struct > > > > > > > > > > > drm_dp_mst_branch *mstb, > > > > > > > > > > > * port, so just throw the port > > > > > > > > > > > out > > > > > > > > > > > and > > > > > > > > > > > make > > > > > > > > > > > sure we > > > > > > > > > > > * reprobe the link address of > > > > > > > > > > > it's > > > > > > > > > > > parent > > > > > > > > > > > MSTB > > > > > > > > > > > */ > > > > > > > > > > > + /* should also consider > > > > > > > > > > > notify_unplug_event > > > > > > > > > > > here. > > > > > > > > > > > + * but it's not a normal case for > > > > > > > > > > > products > > > > > > > > > > > +in the > > > > > > > > > > > market > > > > > > > > > > > + */ > > > > > > > > > > > > > > > > > > > > > > drm_dp_mst_topology_unlink_port(mgr, > > > > > > > > > > > port); > > > > > > > > > > > mstb->link_address_sent = false; > > > > > > > > > > > dowork = true; @@ -2541,10 > > > > > > > > > > > +2545,14 @@ > > > > > > > > > > > drm_dp_mst_handle_conn_stat(struct > > > > > > > > > > > drm_dp_mst_branch > > > > > > > > > > > *mstb, > > > > > > > > > > > port->ddps = conn_stat- > > > > > > > > > > > > displayport_device_plug_status; > > > > > > > > > > > > > > > > > > > > > > if (old_ddps != port->ddps) { > > > > > > > > > > > - if (port->ddps && !port->input) > > > > > > > > > > > + if (port->ddps && !port->input) { > > > > > > > > > > > > > > > > > > > > > > drm_dp_send_enum_path_resources(mgr, > > > > > > > > > > > mstb, > > > > > > > > > > > port); > > > > > > > > > > > - else > > > > > > > > > > > + } else { > > > > > > > > > > > port->full_pbn = 0; > > > > > > > > > > > + if (port->connector && > > > > > > > > > > > + > > > > > > > > > > > drm_dp_mst_is_end_device(port- > > > > > > > > > > > > pdt, > > > > > > > > > > > +port- > > > > > > > > > > > > mcs)) > > > > > > > > > > > + notify_unplug_event = > > > > > > > > > > > true; > > > > > > > > > > > + } > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > new_pdt = port->input ? DP_PEER_DEVICE_NONE : > > > > > > > > > > > conn_stat- > > > > > > > > > > > > peer_device_type; > > > > > > > > > > > @@ -2557,11 +2565,15 @@ drm_dp_mst_handle_conn_stat(struct > > > > > > > > > > > drm_dp_mst_branch > > > > > > > > > > > *mstb, > > > > > > > > > > > dowork = false; > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > + if (notify_unplug_event && > > > > > > > > > > > +mgr->cbs->notify_csn_disconnection) > > > > > > > > > > > + mgr->cbs->notify_csn_disconnection(port- > > > > > > > > > > > > connector); > > > > > > > > > > > + > > > > > > > > > > > if (port->connector) > > > > > > > > > > > drm_modeset_unlock(&mgr->base.lock); > > > > > > > > > > > else if (create_connector) > > > > > > > > > > > drm_dp_mst_port_add_connector(mstb, port); > > > > > > > > > > > > > > > > > > > > > > + > > > > > > > > > > > out: > > > > > > > > > > > drm_dp_mst_topology_put_port(port); > > > > > > > > > > > if (dowork) > > > > > > > > > > > diff --git a/include/drm/drm_dp_mst_helper.h > > > > > > > > > > > b/include/drm/drm_dp_mst_helper.h index > > > > > > > > > > > 78044ac5b59b..ff9e47729841 > > > > > > > > > > > 100644 > > > > > > > > > > > --- a/include/drm/drm_dp_mst_helper.h > > > > > > > > > > > +++ b/include/drm/drm_dp_mst_helper.h > > > > > > > > > > > @@ -525,6 +525,7 @@ struct drm_dp_mst_topology_cbs { > > > > > > > > > > > * IRQ pulse handler. > > > > > > > > > > > */ > > > > > > > > > > > void (*poll_hpd_irq)(struct > > > > > > > > > > > drm_dp_mst_topology_mgr > > > > > > > > > > > *mgr); > > > > > > > > > > > + void (*notify_csn_disconnection)(struct > > > > > > > > > > > drm_connector > > > > > > > > > > > +*connector); > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > > #define DP_MAX_PAYLOAD (sizeof(unsigned long) * 8) > > > > > > > > > > > -- > > > > > > > > > > > 2.31.0 > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > From: Lin, Wayne > > > > > > > > > > > > Sent: Wednesday, December 8, 2021 11:39 AM > > > > > > > > > > > > To: 'Lyude Paul' <ly...@redhat.com> > > > > > > > > > > > > Subject: RE: [PATCH] WIP: drm/dp_mst: Add support for > > > > > > > > > > > > dumping > > > > > > > > > > > > topology ref histories from debugfs > > > > > > > > > > > > > > > > > > > > > > > > No worries Lyude! > > > > > > > > > > > > Thanks for keeping helping on this. Take your time : ) > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > From: Lyude Paul <ly...@redhat.com> > > > > > > > > > > > > > Sent: Wednesday, December 8, 2021 7:05 AM > > > > > > > > > > > > > To: Lin, Wayne <wayne....@amd.com> > > > > > > > > > > > > > Subject: Re: [PATCH] WIP: drm/dp_mst: Add support for > > > > > > > > > > > > > dumping > > > > > > > > > > > > > topology ref histories from debugfs > > > > > > > > > > > > > > > > > > > > > > > > > > Sorry! I will try to get to this tomorrow, if not then > > > > > > > > > > > > > sometime > > > > > > > > > > > > > this week. > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, 2021-11-30 at 08:41 +0000, Lin, Wayne wrote: > > > > > > > > > > > > > > [Public] > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Lyude, > > > > > > > > > > > > > > > > > > > > > > > > > > > > Finally have some bandwidth to get back to this > > > > > > > > > > > > > > problem! > > > > > > > > > > > > > > I roughly went through this patch and I'm just aware > > > > > > > > > > > > > > that > > > > > > > > > > > > > > we > > > > > > > > > > > > > > already have such kind of convenient tool for a > > > > > > > > > > > > > > while. > > > > > > > > > > > > > > I think it's definitely useful for us to track > > > > > > > > > > > > > > port/mstb > > > > > > > > > > > > > > reference count issues and I'll start to embrace > > > > > > > > > > > > > > this > > > > > > > > > > > > > > feature > > > > > > > > > > > > > > for cleaning up those issues. Thank you Lyude! > > > > > > > > > > > > > > > > > > > > > > > > > > > > However, I think the issue that I was trying to fix > > > > > > > > > > > > > > is > > > > > > > > > > > > > > not > > > > > > > > > > > > > > related to what you suggested: > > > > > > > > > > > > > > " The idea here is that if stream resources aren't > > > > > > > > > > > > > > being > > > > > > > > > > > > > > released, my guess would be that we're not dropping > > > > > > > > > > > > > > topology > > > > > > > > > > > > > > references for the port which means the connector > > > > > > > > > > > > > > never > > > > > > > > > > > > > > goes > > > > > > > > > > > > > > away." > > > > > > > > > > > > > > The issue I was trying to fix is about releasing > > > > > > > > > > > > > > dc_link->remote_sinks while receiving a CSN message > > > > > > > > > > > > > > notifying > > > > > > > > > > > > > > the connection status of a sst connector of a port > > > > > > > > > > > > > > changed > > > > > > > > > > > > > > from connected to disconnected. Not the connection > > > > > > > > > > > > > > status > > > > > > > > > > > > > > changed of a mst branch device. > > > > > > > > > > > > > > e.g. > > > > > > > > > > > > > > src - 1st_mstb - 2nd_mstb - sst_monitor => src - > > > > > > > > > > > > > > 1st_mstb > > > > > > > > > > > > > > (disconnect) 2nd_mstb - sst_monitor > > > > > > > > > > > > > > > > > > > > > > > > > > > > In above case, after receiving CSN, we will put > > > > > > > > > > > > > > topology > > > > > > > > > > > > > > references of 2nd mstb and its port which is > > > > > > > > > > > > > > connected > > > > > > > > > > > > > > with > > > > > > > > > > > > > > the sst monitor. As the result of that, we can call > > > > > > > > > > > > > > drm_dp_delayed_destroy_port() to unregister and put > > > > > > > > > > > > > > the > > > > > > > > > > > > > > drm > > > > > > > > > > > > > > connector. > > > > > > > > > > > > > > > > > > > > > > > > > > > > However, in below case: > > > > > > > > > > > > > > e.g. > > > > > > > > > > > > > > src - 1st_mstb - sst_monitor => src - 1st_mstb > > > > > > > > > > > > > > (disconnect) > > > > > > > > > > > > > > sst_monitor > > > > > > > > > > > > > > > > > > > > > > > > > > > > In this case, which is the case having problem, it > > > > > > > > > > > > > > definitely > > > > > > > > > > > > > > won't decrease the topology references count of the > > > > > > > > > > > > > > port > > > > > > > > > > > > > > which > > > > > > > > > > > > > > was connected to the sst monitor to zero since the > > > > > > > > > > > > > > port > > > > > > > > > > > > > > is > > > > > > > > > > > > > > still existing in the topology. Same as the malloc > > > > > > > > > > > > > > reference > > > > > > > > > > > > > > since the port can't get destroyed. Hence, the port > > > > > > > > > > > > > > still > > > > > > > > > > > > > > exists and we won't call > > > > > > > > > > > > > > drm_dp_delayed_destroy_port() to unregister and put > > > > > > > > > > > > > > the > > > > > > > > > > > > > > drm > > > > > > > > > > > > > > connector. > > > > > > > > > > > > > > I looked up the code and > > > > > > > > > > > > > > drm_dp_delayed_destroy_port() > > > > > > > > > > > > > > seems > > > > > > > > > > > > > > like the only place to call drm_connector_put() > > > > > > > > > > > > > > which > > > > > > > > > > > > > > means > > > > > > > > > > > > > > we > > > > > > > > > > > > > > can't put reference count of drm connector under > > > > > > > > > > > > > > this > > > > > > > > > > > > > > case > > > > > > > > > > > > > > and > > > > > > > > > > > > > > can't release dc_sink resource by destroying drm > > > > > > > > > > > > > > connector. > > > > > > > > > > > > > > > > > > > > > > > > > > > > I would also like to point out that this resource > > > > > > > > > > > > > > (remote_sinks) is specific to different stream > > > > > > > > > > > > > > sinks. So > > > > > > > > > > > > > > if > > > > > > > > > > > > > > we're trying to release this dc_sink resource by > > > > > > > > > > > > > > destroying > > > > > > > > > > > > > > the drm connector, it conflicts the idea that you > > > > > > > > > > > > > > suggested > > > > > > > > > > > > > > before that we should always keep the drm connector > > > > > > > > > > > > > > until > > > > > > > > > > > > > > it's > > > > > > > > > > > > > > no longer reachable in the topology. > > > > > > > > > > > > > > Releasing dc_sink should be binding with the > > > > > > > > > > > > > > disconnection > > > > > > > > > > > > > > event. > > > > > > > > > > > > > > > > > > > > > > > > > > > > I understand your concern that we should not just > > > > > > > > > > > > > > easily > > > > > > > > > > > > > > change the logic here since it's the result after > > > > > > > > > > > > > > solving > > > > > > > > > > > > > > tons > > > > > > > > > > > > > > of bugs before and might cause other side effect. > > > > > > > > > > > > > > So, > > > > > > > > > > > > > > just > > > > > > > > > > > > > > my > > > > > > > > > > > > > > 2 cents, what I'm thinking is to register a callback > > > > > > > > > > > > > > function > > > > > > > > > > > > > > for our driver to notify us that the remote sink is > > > > > > > > > > > > > > detached. > > > > > > > > > > > > > > This just aligns our flow handling long HPD event of > > > > > > > > > > > > > > legacy > > > > > > > > > > > > > > (sst) DP. > > > > > > > > > > > > > > For sst case, once we detect long HPD event > > > > > > > > > > > > > > indicating > > > > > > > > > > > > > > the > > > > > > > > > > > > > > monitor is detached, we will immediately try to > > > > > > > > > > > > > > release > > > > > > > > > > > > > > the > > > > > > > > > > > > > > dc_link->local_sink and fire hotplug event to upper > > > > > > > > > > > > > > layer. > > > > > > > > > > > > > > Same as here, once receives a CSN message notifying > > > > > > > > > > > > > > a > > > > > > > > > > > > > > drm > > > > > > > > > > > > > > connector is changed from connected to disconnected, > > > > > > > > > > > > > > trigger > > > > > > > > > > > > > > the callback function and we can try to release the > > > > > > > > > > > > > > dc_sink > > > > > > > > > > > > > > resource. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Would like to know your thought and insight please : > > > > > > > > > > > > > > ) > > > > > > > > > > > > > > > > > > > > > > > > > > > > Btw, I got some errors and warnings while building > > > > > > > > > > > > > > and > > > > > > > > > > > > > > have > > > > > > > > > > > > > > some code adjustments as below : ) Thank you Lyude > > > > > > > > > > > > > > for > > > > > > > > > > > > > > your > > > > > > > > > > > > > > always kindly help!! > > > > > > > > > > > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > Wayne > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > > > > > > From: Lyude Paul <ly...@redhat.com> > > > > > > > > > > > > > > > Sent: Wednesday, November 3, 2021 7:15 AM > > > > > > > > > > > > > > > To: Lin, Wayne <wayne....@amd.com> > > > > > > > > > > > > > > > Subject: [PATCH] WIP: drm/dp_mst: Add support for > > > > > > > > > > > > > > > dumping > > > > > > > > > > > > > > > topology ref histories from debugfs > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > TODO: > > > > > > > > > > > > > > > * Implement support for i915 > > > > > > > > > > > > > > > * Finish writing this commit message > > > > > > > > > > > > > > > * ??? > > > > > > > > > > > > > > > * profit > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Signed-off-by: Lyude Paul <ly...@redhat.com> > > > > > > > > > > > > > > > --- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hey wayne! SO-hopefully if I did this correctly > > > > > > > > > > > > > > > then > > > > > > > > > > > > > > > this > > > > > > > > > > > > > > > should just work on amdgpu. What this patch should > > > > > > > > > > > > > > > do > > > > > > > > > > > > > > > is > > > > > > > > > > > > > > > add > > > > > > > > > > > > > > > a debugfs file to amdgpu called > > > > > > > > > > > > > > > "amdgpu_dp_mst_topology_refs", and when you read > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > file > > > > > > > > > > > > > > > it > > > > > > > > > > > > > > > should print out the topology reference history of > > > > > > > > > > > > > > > every > > > > > > > > > > > > > > > MSTB and Port in memory, along with how many times > > > > > > > > > > > > > > > we've > > > > > > > > > > > > > > > hit > > > > > > > > > > > > > > > the codepath in each backtrace. An example: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Port DP-5 (0000000005c37748) topology ref history: > > > > > > > > > > > > > > > 1 gets (last at 58.468973): > > > > > > > > > > > > > > > drm_dp_send_link_address+0x6a5/0xa00 > > > > > > > > > > > > > > > [drm_kms_helper] > > > > > > > > > > > > > > > drm_dp_check_and_send_link_address+0xad/0xd0 > > > > > > > > > > > > > > > [drm_kms_helper] > > > > > > > > > > > > > > > drm_dp_mst_link_probe_work+0x14e/0x1a0 > > > > > > > > > > > > > > > [drm_kms_helper] > > > > > > > > > > > > > > > process_one_work+0x1e3/0x390 > > > > > > > > > > > > > > > worker_thread+0x50/0x3a0 > > > > > > > > > > > > > > > kthread+0x124/0x150 > > > > > > > > > > > > > > > ret_from_fork+0x1f/0x30 > > > > > > > > > > > > > > > 1 puts (last at 58.469357): > > > > > > > > > > > > > > > drm_dp_mst_topology_put_port+0x6a/0x210 > > > > > > > > > > > > > > > [drm_kms_helper] > > > > > > > > > > > > > > > drm_dp_send_link_address+0x39e/0xa00 > > > > > > > > > > > > > > > [drm_kms_helper] > > > > > > > > > > > > > > > drm_dp_check_and_send_link_address+0xad/0xd0 > > > > > > > > > > > > > > > [drm_kms_helper] > > > > > > > > > > > > > > > drm_dp_mst_link_probe_work+0x14e/0x1a0 > > > > > > > > > > > > > > > [drm_kms_helper] > > > > > > > > > > > > > > > process_one_work+0x1e3/0x390 > > > > > > > > > > > > > > > worker_thread+0x50/0x3a0 > > > > > > > > > > > > > > > kthread+0x124/0x150 > > > > > > > > > > > > > > > ret_from_fork+0x1f/0x30 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The idea here is that if stream resources aren't > > > > > > > > > > > > > > > being > > > > > > > > > > > > > > > released, my guess would be that we're not > > > > > > > > > > > > > > > dropping > > > > > > > > > > > > > > > topology > > > > > > > > > > > > > > > references for the port which means the connector > > > > > > > > > > > > > > > never > > > > > > > > > > > > > > > goes > > > > > > > > > > > > > > > away. So, if that's really the case then once we > > > > > > > > > > > > > > > unplug > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > offending connector we should be able to find a > > > > > > > > > > > > > > > pair > > > > > > > > > > > > > > > of > > > > > > > > > > > > > > > gets/puts for the offending leaked connector where > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > get/put count doesn't match up. Also, if the frame > > > > > > > > > > > > > > > count > > > > > > > > > > > > > > > on > > > > > > > > > > > > > > > the backtrace isn't long enough you can increase > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > value > > > > > > > > > > > > > > > of STACK_DEPTH in > > > > > > > > > > > > > > > drivers/gpu/drm/drm_dp_mst_topology.c > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > recompile to get more frames. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > To enable this, first enable CONFIG_EXPERT for > > > > > > > > > > > > > > > your > > > > > > > > > > > > > > > kernel > > > > > > > > > > > > > > > which will unhide > > > > > > > > > > > > > > > CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS. > > > > > > > > > > > > > > > Then just enable > > > > > > > > > > > > > > > CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS, > > > > > > > > > > > > > > > recompile, and it should be good to go. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Let me know if this works for you, and hopefully > > > > > > > > > > > > > > > this > > > > > > > > > > > > > > > should > > > > > > > > > > > > > > > tell us exactly what the problem actually is here. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | > > > > > > > > > > > > > > > 35 > > > > > > > > > > > > > > > ++++ > > > > > > > > > > > > > > > drivers/gpu/drm/drm_dp_mst_topology.c | > > > > > > > > > > > > > > > 173 > > > > > > > > > > > > > > > ++++++++++++++---- > > > > > > > > > > > > > > > drivers/gpu/drm/nouveau/nouveau_debugfs.c | > > > > > > > > > > > > > > > 35 > > > > > > > > > > > > > > > ++++ > > > > > > > > > > > > > > > include/drm/drm_dp_mst_helper.h | > > > > > > > > > > > > > > > 18 > > > > > > > > > > > > > > > ++ > > > > > > > > > > > > > > > 4 files changed, 228 insertions(+), 33 > > > > > > > > > > > > > > > deletions(-) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > diff --git > > > > > > > > > > > > > > > a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_ > > > > > > > > > > > > > > > debu > > > > > > > > > > > > > > > gf > > > > > > > > > > > > > > > s. > > > > > > > > > > > > > > > c > > > > > > > > > > > > > > > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_ > > > > > > > > > > > > > > > debu > > > > > > > > > > > > > > > gf > > > > > > > > > > > > > > > s. > > > > > > > > > > > > > > > c > > > > > > > > > > > > > > > index 1a68a674913c..1a14732c52b4 100644 > > > > > > > > > > > > > > > --- > > > > > > > > > > > > > > > a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_ > > > > > > > > > > > > > > > debu > > > > > > > > > > > > > > > gf > > > > > > > > > > > > > > > s. > > > > > > > > > > > > > > > c > > > > > > > > > > > > > > > +++ > > > > > > > > > > > > > > > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_ > > > > > > > > > > > > > > > debu > > > > > > > > > > > > > > > gf > > > > > > > > > > > > > > > +++ s.c > > > > > > > > > > > > > > > @@ -3063,6 +3063,37 @@ static int > > > > > > > > > > > > > > > mst_topo_show(struct > > > > > > > > > > > > > > > seq_file *m, void > > > > > > > > > > > > > > > *unused) > > > > > > > > > > > > > > > return 0; > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +#ifdef CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS > > > > > > > > > > > > > > > +static int mst_topology_ref_dump_show(struct > > > > > > > > > > > > > > > seq_file > > > > > > > > > > > > > > > *m, > > > > > > > > > > > > > > > +void > > > > > > > > > > > > > > > +*unused) { > > > > > > > > > > > > > > > + struct amdgpu_device *adev = (struct > > > > > > > > > > > > > > > amdgpu_device > > > > > > > > > > > > > > > +*)m->private; > > > > > > > > > > > > > > > + struct drm_device *dev = adev_to_drm(adev); > > > > > > > > > > > > > > > + struct drm_connector *connector; > > > > > > > > > > > > > > > + struct drm_connector_list_iter conn_iter; > > > > > > > > > > > > > > > + struct amdgpu_dm_connector *aconnector; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + drm_connector_list_iter_begin(dev, > > > > > > > > > > > > > > > &conn_iter); > > > > > > > > > > > > > > > + drm_for_each_connector_iter(connector, > > > > > > > > > > > > > > > &conn_iter) > > > > > > > > > > > > > > > { > > > > > > > > > > > > > > > + if (connector->connector_type != > > > > > > > > > > > > > > > DRM_MODE_CONNECTOR_DisplayPort) > > > > > > > > > > > > > > > + continue; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + aconnector = > > > > > > > > > > > > > > > +to_amdgpu_dm_connector(connector); > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + /* Ensure we're only dumping the > > > > > > > > > > > > > > > topology > > > > > > > > > > > > > > > of > > > > > > > > > > > > > > > a > > > > > > > > > > > > > > > +root mst node > > > > > > > > > > > > > > > */ > > > > > > > > > > > > > > > + if (!aconnector- > > > > > > > > > > > > > > > >mst_mgr.max_payloads) > > > > > > > > > > > > > > > + continue; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + seq_printf(m, "\nMST topology for > > > > > > > > > > > > > > > connector > > > > > > > > > > > > > > > +%d\n", > > > > > > > > > > > > > > > aconnector->connector_id); > > > > > > > > > > > > > > > + drm_dp_mst_dump_topology_refs(m, > > > > > > > > > > > > > > > +&aconnector->mst_mgr); > > > > > > > > > > > > > > > + } > > > > > > > > > > > > > > > + drm_connector_list_iter_end(&conn_iter); > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + return 0; > > > > > > > > > > > > > > > +} > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +DEFINE_SHOW_ATTRIBUTE(mst_topology_ref_dump); > > > > > > > > > > > > > > > +#endif > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > /* > > > > > > > > > > > > > > > * Sets trigger hpd for MST topologies. > > > > > > > > > > > > > > > * All connected connectors will be rediscovered > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > re > > > > > > > > > > > > > > > started as needed if val of 1 is sent. > > > > > > > > > > > > > > > @@ -3299,6 +3330,10 @@ void > > > > > > > > > > > > > > > dtn_debugfs_init(struct > > > > > > > > > > > > > > > amdgpu_device > > > > > > > > > > > > > > > *adev) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > debugfs_create_file("amdgpu_mst_topology", > > > > > > > > > > > > > > > 0444, > > > > > > > > > > > > > > > root, > > > > > > > > > > > > > > > adev, &mst_topo_fops); > > > > > > > > > > > > > > > +#ifdef CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > debugfs_create_file("amdgpu_dp_mst_topology_refs", > > > > > > > > > > > > > > > +0444, root, adev, > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > &mst_topology_ref_dump_fops); > > > > > > > > > > > > > > > +#endif > > > > > > > > > > > > > > > debugfs_create_file("amdgpu_dm_dtn_log", > > > > > > > > > > > > > > > 0644, > > > > > > > > > > > > > > > root, > > > > > > > > > > > > > > > adev, > > > > > > > > > > > > > > > &dtn_log_fops); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c > > > > > > > > > > > > > > > b/drivers/gpu/drm/drm_dp_mst_topology.c > > > > > > > > > > > > > > > index 1aa8702383d4..0159828c494d 100644 > > > > > > > > > > > > > > > --- a/drivers/gpu/drm/drm_dp_mst_topology.c > > > > > > > > > > > > > > > +++ b/drivers/gpu/drm/drm_dp_mst_topology.c > > > > > > > > > > > > > > > @@ -1366,23 +1366,6 @@ static int > > > > > > > > > > > > > > > drm_dp_mst_wait_tx_reply(struct drm_dp_mst_branch > > > > > > > > > > > > > > > *mstb, > > > > > > > > > > > > > > > return ret; > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -static struct drm_dp_mst_branch > > > > > > > > > > > > > > > *drm_dp_add_mst_branch_device(u8 lct, u8 > > > > > > > > > > > > > > > *rad) -{ > > > > > > > > > > > > > > > - struct drm_dp_mst_branch *mstb; > > > > > > > > > > > > > > > - > > > > > > > > > > > > > > > - mstb = kzalloc(sizeof(*mstb), GFP_KERNEL); > > > > > > > > > > > > > > > - if (!mstb) > > > > > > > > > > > > > > > - return NULL; > > > > > > > > > > > > > > > - > > > > > > > > > > > > > > > - mstb->lct = lct; > > > > > > > > > > > > > > > - if (lct > 1) > > > > > > > > > > > > > > > - memcpy(mstb->rad, rad, lct / 2); > > > > > > > > > > > > > > > - INIT_LIST_HEAD(&mstb->ports); > > > > > > > > > > > > > > > - kref_init(&mstb->topology_kref); > > > > > > > > > > > > > > > - kref_init(&mstb->malloc_kref); > > > > > > > > > > > > > > > - return mstb; > > > > > > > > > > > > > > > -} > > > > > > > > > > > > > > > - > > > > > > > > > > > > > > > static void drm_dp_free_mst_branch_device(struct > > > > > > > > > > > > > > > kref > > > > > > > > > > > > > > > *kref) { > > > > > > > > > > > > > > > struct drm_dp_mst_branch *mstb = @@ -1642,12 > > > > > > > > > > > > > > > +1625,20 > > > > > > > > > > > > > > > @@ topology_ref_type_to_str(enum > > > > > > > > > > > > > > > drm_dp_mst_topology_ref_type type) > > > > > > > > > > > > > > > return "put"; > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +static const char > > > > > > > > > > > > > > > *topology_ref_history_type_to_str(enum > > > > > > > > > > > > > > > +drm_dp_mst_topology_history_type type) { > > > > > > > > > > > > > > > + if (type == > > > > > > > > > > > > > > > DRM_DP_MST_TOPOLOGY_HISTORY_PORT) > > > > > > > > > > > > > > > + return "Port"; > > > > > > > > > > > > > > > + else > > > > > > > > > > > > > > > + return "MSTB"; } > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > static void > > > > > > > > > > > > > > > -__dump_topology_ref_history(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_ref_history *history, > > > > > > > > > > > > > > > - void *ptr, const char > > > > > > > > > > > > > > > *type_str) > > > > > > > > > > > > > > > +dump_topology_ref_history(struct > > > > > > > > > > > > > > > +drm_dp_mst_topology_ref_history *history, struct > > > > > > > > > > > > > > > +drm_printer p) > > > > > > > > > > > > > > > { > > > > > > > > > > > > > > > - struct drm_printer p = > > > > > > > > > > > > > > > drm_debug_printer(DBG_PREFIX); > > > > > > > > > > > > > > > + char *connector_name = NULL; > > > > > > > > > > > > > > > char *buf = kzalloc(PAGE_SIZE, GFP_KERNEL); > > > > > > > > > > > > > > > + void *ptr; > > > > > > > > > > > > > > > int i; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > if (!buf) > > > > > > > > > > > > > > > @@ -1656,14 +1647,29 @@ > > > > > > > > > > > > > > > __dump_topology_ref_history(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_ref_history *history, > > > > > > > > > > > > > > > if (!history->len) > > > > > > > > > > > > > > > goto out; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > + /* Get a pointer to the actual MSTB/port so > > > > > > > > > > > > > > > we > > > > > > > > > > > > > > > can > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > +memory > > > > > > > > > > > > > > > address to the kernel log */ > > > > > > > > > > > > > > > + if (history->type == > > > > > > > > > > > > > > > DRM_DP_MST_TOPOLOGY_HISTORY_PORT) > > > > > > > > > > > > > > > + ptr = container_of(history, struct > > > > > > > > > > > > > > > +drm_dp_mst_port, > > > > > > > > > > > > > > > topology_ref_history); > > > > > > > > > > > > > > > + else > > > > > > > > > > > > > > > + ptr = container_of(history, struct > > > > > > > > > > > > > > > +drm_dp_mst_branch, topology_ref_history); > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > /* First, sort the list so that it goes from > > > > > > > > > > > > > > > oldest > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > newest > > > > > > > > > > > > > > > * reference entry > > > > > > > > > > > > > > > */ > > > > > > > > > > > > > > > sort(history->entries, history->len, > > > > > > > > > > > > > > > sizeof(*history->entries), > > > > > > > > > > > > > > > topology_ref_history_cmp, NULL); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - drm_printf(&p, "%s (%p) topology count > > > > > > > > > > > > > > > reached > > > > > > > > > > > > > > > 0, > > > > > > > > > > > > > > > dumping history:\n", > > > > > > > > > > > > > > > - type_str, ptr); > > > > > > > > > > > > > > > + if (history->type == > > > > > > > > > > > > > > > DRM_DP_MST_TOPOLOGY_HISTORY_PORT) > > > > > > > > > > > > > > > +{ > > > > > > > > > > > > > > > + struct drm_dp_mst_port *port = ptr; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + if (port->connector) > > > > > > > > > > > > > > > + connector_name = > > > > > > > > > > > > > > > +port->connector->name; > > > > > > > > > > > > > > > + } > > > > > > > > > > > > > > > + if (connector_name) > > > > > > > > > > > > > > > + drm_printf(&p, "Port %s (%p) > > > > > > > > > > > > > > > topology > > > > > > > > > > > > > > > ref > > > > > > > > > > > > > > > +history:\n", > > > > > > > > > > > > > > > connector_name, ptr); > > > > > > > > > > > > > > > + else > > > > > > > > > > > > > > > + drm_printf(&p, "%s (%p) topology ref > > > > > > > > > > > > > > > +history:\n", > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +topology_ref_history_type_to_str(history->type), > > > > > > > > > > > > > > > ptr); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > for (i = 0; i < history->len; i++) { > > > > > > > > > > > > > > > const struct > > > > > > > > > > > > > > > drm_dp_mst_topology_ref_entry > > > > > > > > > > > > > > > *entry = @@ > > > > > > > > > > > > > > > - > > > > > > > > > > > > > > > 1682,24 +1688,92 @@ > > > > > > > > > > > > > > > __dump_topology_ref_history(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_ref_history *history, > > > > > > > > > > > > > > > ts_nsec, rem_nsec / 1000, > > > > > > > > > > > > > > > buf); > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - /* Now free the history, since this is the > > > > > > > > > > > > > > > only > > > > > > > > > > > > > > > time > > > > > > > > > > > > > > > we expose it */ > > > > > > > > > > > > > > > - kfree(history->entries); > > > > > > > > > > > > > > > out: > > > > > > > > > > > > > > > kfree(buf); > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +/** > > > > > > > > > > > > > > > + * drm_dp_mst_dump_topology_refs - helper > > > > > > > > > > > > > > > function > > > > > > > > > > > > > > > for > > > > > > > > > > > > > > > +dumping the topology ref history > > > > > > > > > > > > > > > + * @m: File to print to > > > > > > > > > > > > > > > + * @mgr: &struct drm_dp_mst_topology_mgr to use > > > > > > > > > > > > > > > + * > > > > > > > > > > > > > > > + * Prints the topology ref history of all ports > > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > MSTBs > > > > > > > > > > > > > > > +on @mgr that are still in memory, > > > > > > > > > > > > > > > + * regardless of whether they're actually still > > > > > > > > > > > > > > > reachable > > > > > > > > > > > > > > > +through the topology or not. Only enabled > > > > > > > > > > > > > > > + * when %CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is > > > > > > > > > > > > > > > enabled. > > > > > > > > > > > > > > > +Can be implemented by drivers to assist > > > > > > > > > > > > > > > + * with debugging leaks in the DP MST helpers. > > > > > > > > > > > > > > > + */ > > > > > > > > > > > > > > > +void drm_dp_mst_dump_topology_refs(struct > > > > > > > > > > > > > > > seq_file > > > > > > > > > > > > > > > *m, > > > > > > > > > > > > > > > +struct drm_dp_mst_topology_mgr *mgr) { > > > > > > > > > > > > > > > + struct drm_dp_mst_topology_ref_history > > > > > > > > > > > > > > > *history; > > > > > > > > > > > > > > > + struct drm_printer p = > > > > > > > > > > > > > > > drm_seq_file_printer(m); > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + mutex_lock(&mgr->topology_ref_history_lock); > > > > > > > > > > > > > > > + list_for_each_entry(history, > > > > > > > > > > > > > > > +&mgr->topology_ref_history_list, > > > > > > > > > > > > > > > +node) > > > > > > > > > > > > > > > + dump_topology_ref_history(history, > > > > > > > > > > > > > > > p); > > > > > > > > > > > > > > > + mutex_unlock(&mgr- > > > > > > > > > > > > > > > >topology_ref_history_lock); > > > > > > > > > > > > > > > +} > > > > > > > > > > > > > > > +EXPORT_SYMBOL(drm_dp_mst_dump_topology_refs); > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +static void > > > > > > > > > > > > > > > +__init_topology_ref_history(struct > > > > > > > > > > > > > > > +drm_dp_mst_topology_ref_history > > > > > > > > > > > > > > > *history, > > > > > > > > > > > > > > > + struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr > > > > > > > > > > > > > > > +*mgr, > > > > > > > > > > > > > > > + enum > > > > > > > > > > > > > > > +drm_dp_mst_topology_history_type > > > > > > > > > > > > > > > +type) { > > > > > > > > > > > > > > > + history->type = type; > > > > > > > > > > > > > > > + INIT_LIST_HEAD(&history->node); > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + mutex_lock(&mgr->topology_ref_history_lock); > > > > > > > > > > > > > > > + list_add(&history->node, > > > > > > > > > > > > > > > +&mgr->topology_ref_history_list); > > > > > > > > > > > > > > > + mutex_unlock(&mgr- > > > > > > > > > > > > > > > >topology_ref_history_lock); > > > > > > > > > > > > > > > +} > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +static void > > > > > > > > > > > > > > > +__destroy_topology_ref_history(struct > > > > > > > > > > > > > > > +drm_dp_mst_topology_ref_history > > > > > > > > > > > > > > > *history, > > > > > > > > > > > > > > > + struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr > > > > > > > > > > > > > > > +*mgr) { > > > > > > > > > > > > > > > + mutex_lock(&mgr->topology_ref_history_lock); > > > > > > > > > > > > > > > + list_del(&mgr->topology_ref_history_list); > > > > > > > > > > > > > > > + mutex_unlock(&mgr- > > > > > > > > > > > > > > > >topology_ref_history_lock); > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + kfree(history->entries); } > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +static __always_inline void > > > > > > > > > > > > > > > +init_port_topology_history(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr > > > > > > > > > > > > > > > +*mgr, struct drm_dp_mst_port *port) { > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +__init_topology_ref_history(&port- > > > > > > > > > > > > > > > > topology_ref_history, > > > > > > > > > > > > > > > +mgr, > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +DRM_DP_MST_TOPOLOGY_HISTORY_PORT); > > > > > > > > > > > > > > > +} > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +static __always_inline void > > > > > > > > > > > > > > > +init_mstb_topology_history(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr > > > > > > > > > > > > > > > +*mgr, struct drm_dp_mst_branch *mstb) { > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +__init_topology_ref_history(&mstb- > > > > > > > > > > > > > > > > topology_ref_history, > > > > > > > > > > > > > > > +mgr, > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +DRM_DP_MST_TOPOLOGY_HISTORY_MSTB); > > > > > > > > > > > > > > > +} > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +static __always_inline void > > > > > > > > > > > > > > > +destroy_port_topology_history(struct > > > > > > > > > > > > > > > drm_dp_mst_port > > > > > > > > > > > > > > > *port) > > > > > > > > > > > > > > > +{ > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +__destroy_topology_ref_history(&port- > > > > > > > > > > > > > > > > topology_ref_history, > > > > > > > > > > > > > > > +port->mgr); } > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +static __always_inline void > > > > > > > > > > > > > > > +destroy_mstb_topology_history(struct > > > > > > > > > > > > > > > drm_dp_mst_branch > > > > > > > > > > > > > > > +*mstb) { > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > +__destroy_topology_ref_history(&mstb- > > > > > > > > > > > > > > > > topology_ref_history, > > > > > > > > > > > > > > > +mstb->mgr); } > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > static __always_inline void > > > > > > > > > > > > > > > dump_mstb_topology_history(struct > > > > > > > > > > > > > > > drm_dp_mst_branch > > > > > > > > > > > > > > > *mstb) > > > > > > > > > > > > > > > { > > > > > > > > > > > > > > > - > > > > > > > > > > > > > > > __dump_topology_ref_history(&mstb- > > > > > > > > > > > > > > > > topology_ref_history, > > > > > > > > > > > > > > > mstb, > > > > > > > > > > > > > > > - "MSTB"); > > > > > > > > > > > > > > > + dump_topology_ref_history(&mstb- > > > > > > > > > > > > > > > > topology_ref_history, > > > > > > > > > > > > > > > +drm_debug_printer(DBG_PREFIX)); > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > static __always_inline void > > > > > > > > > > > > > > > dump_port_topology_history(struct drm_dp_mst_port > > > > > > > > > > > > > > > *port) > > > > > > > > > > > > > > > { > > > > > > > > > > > > > > > - > > > > > > > > > > > > > > > __dump_topology_ref_history(&port- > > > > > > > > > > > > > > > > topology_ref_history, > > > > > > > > > > > > > > > port, > > > > > > > > > > > > > > > - "Port"); > > > > > > > > > > > > > > > + dump_topology_ref_history(&port- > > > > > > > > > > > > > > > > topology_ref_history, > > > > > > > > > > > > > > > +drm_debug_printer(DBG_PREFIX)); > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > static __always_inline void @@ -1729,6 +1803,14 > > > > > > > > > > > > > > > @@ > > > > > > > > > > > > > > > topology_ref_history_unlock(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr *mgr) } #else static > > > > > > > > > > > > > > > inline > > > > > > > > > > > > > > > void > > > > > > > > > > > > > > > +init_port_topology_history(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr > > > > > > > > > > > > > > > +*mgr, struct drm_dp_mst_port *port); static > > > > > > > > > > > > > > > inline > > > > > > > > > > > > > > > void > > > > > > > > > > > > > > Should also add the bracket, otherwise will get > > > > > > > > > > > > > > warnings. > > > > > > > > > > > > > > => static inline void > > > > > > > > > > > > > > init_port_topology_history(struct > > > > > > > > > > > > > > drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port > > > > > > > > > > > > > > *port) > > > > > > > > > > > > > > {}; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +init_mstb_topology_history(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr > > > > > > > > > > > > > > > +*mgr, struct drm_dp_mst_branch *mstb); static > > > > > > > > > > > > > > > inline > > > > > > > > > > > > > > > void > > > > > > > > > > > > > > Same as above > > > > > > > > > > > > > > => static inline void > > > > > > > > > > > > > > init_mstb_topology_history(struct > > > > > > > > > > > > > > drm_dp_mst_topology_mgr *mgr, struct > > > > > > > > > > > > > > drm_dp_mst_branch > > > > > > > > > > > > > > *mstb) > > > > > > > > > > > > > > {}; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +destroy_port_topology_history(struct > > > > > > > > > > > > > > > +drm_dp_mst_topology_mgr *mgr, struct > > > > > > > > > > > > > > > drm_dp_mst_port > > > > > > > > > > > > > > > +*port); static inline void > > > > > > > > > > > > > > destroy_port_topology_history() takes one parameter > > > > > > > > > > > > > > only > > > > > > > > > > > > > > which > > > > > > > > > > > > > > is port. > > > > > > > > > > > > > > => destroy_port_topology_history(struct > > > > > > > > > > > > > > drm_dp_mst_port > > > > > > > > > > > > > > *port) > > > > > > > > > > > > > > {}; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +destroy_mstb_topology_history(struct > > > > > > > > > > > > > > > +drm_dp_mst_topology_mgr *mgr, struct > > > > > > > > > > > > > > > drm_dp_mst_branch > > > > > > > > > > > > > > > +*mstb); static inline void > > > > > > > > > > > > > > destroy_mstb_topology_history() takes one parameter > > > > > > > > > > > > > > only > > > > > > > > > > > > > > which > > > > > > > > > > > > > > is mstb => destroy_mstb_topology_history(struct > > > > > > > > > > > > > > drm_dp_mst_branch > > > > > > > > > > > > > > *mstb) {}; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > topology_ref_history_lock(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr > > > > > > > > > > > > > > > *mgr) {} static inline void > > > > > > > > > > > > > > > topology_ref_history_unlock(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr *mgr) {} @@ -1740,6 > > > > > > > > > > > > > > > +1822,25 > > > > > > > > > > > > > > > @@ > > > > > > > > > > > > > > > dump_port_topology_history(struct drm_dp_mst_port > > > > > > > > > > > > > > > *port) > > > > > > > > > > > > > > > {} > > > > > > > > > > > > > > > #define save_port_topology_ref(port, type) #endif > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +static struct drm_dp_mst_branch * > > > > > > > > > > > > > > > +drm_dp_add_mst_branch_device(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr > > > > > > > > > > > > > > > +*mgr, > > > > > > > > > > > > > > > +u8 lct, u8 *rad) { > > > > > > > > > > > > > > > + struct drm_dp_mst_branch *mstb; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + mstb = kzalloc(sizeof(*mstb), GFP_KERNEL); > > > > > > > > > > > > > > > + if (!mstb) > > > > > > > > > > > > > > > + return NULL; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + mstb->lct = lct; > > > > > > > > > > > > > > > + if (lct > 1) > > > > > > > > > > > > > > > + memcpy(mstb->rad, rad, lct / 2); > > > > > > > > > > > > > > > + INIT_LIST_HEAD(&mstb->ports); > > > > > > > > > > > > > > > + kref_init(&mstb->topology_kref); > > > > > > > > > > > > > > > + kref_init(&mstb->malloc_kref); > > > > > > > > > > > > > > > + init_mstb_topology_history(mgr, mstb); > > > > > > > > > > > > > > > + return mstb; > > > > > > > > > > > > > > > +} > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > static void > > > > > > > > > > > > > > > drm_dp_destroy_mst_branch_device(struct > > > > > > > > > > > > > > > kref > > > > > > > > > > > > > > > *kref) { > > > > > > > > > > > > > > > struct drm_dp_mst_branch *mstb = @@ -1747,6 > > > > > > > > > > > > > > > +1848,7 > > > > > > > > > > > > > > > @@ > > > > > > > > > > > > > > > static void > > > > > > > > > > > > > > > drm_dp_destroy_mst_branch_device(struct > > > > > > > > > > > > > > > kref *kref) > > > > > > > > > > > > > > > struct drm_dp_mst_topology_mgr *mgr = mstb- > > > > > > > > > > > > > > > >mgr; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > dump_mstb_topology_history(mstb); > > > > > > > > > > > > > > > + destroy_mstb_topology_history(mstb); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > INIT_LIST_HEAD(&mstb->destroy_next); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > @@ -1856,6 +1958,7 @@ static void > > > > > > > > > > > > > > > drm_dp_destroy_port(struct > > > > > > > > > > > > > > > kref > > > > > > > > > > > > > > > *kref) > > > > > > > > > > > > > > > struct drm_dp_mst_topology_mgr *mgr = port- > > > > > > > > > > > > > > > >mgr; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > dump_port_topology_history(port); > > > > > > > > > > > > > > > + destroy_port_topology_history(port); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > /* There's nothing that needs locking to > > > > > > > > > > > > > > > destroy > > > > > > > > > > > > > > > an > > > > > > > > > > > > > > > input port yet */ > > > > > > > > > > > > > > > if (port->input) { > > > > > > > > > > > > > > > @@ -2135,7 +2238,7 @@ drm_dp_port_set_pdt(struct > > > > > > > > > > > > > > > drm_dp_mst_port *port, u8 new_pdt, > > > > > > > > > > > > > > > ret = > > > > > > > > > > > > > > > drm_dp_mst_register_i2c_bus(port); > > > > > > > > > > > > > > > } else { > > > > > > > > > > > > > > > lct = > > > > > > > > > > > > > > > drm_dp_calculate_rad(port, > > > > > > > > > > > > > > > rad); > > > > > > > > > > > > > > > - mstb = > > > > > > > > > > > > > > > drm_dp_add_mst_branch_device(lct, rad); > > > > > > > > > > > > > > > + mstb = > > > > > > > > > > > > > > > +drm_dp_add_mst_branch_device(mgr, lct, rad); > > > > > > > > > > > > > > > if (!mstb) { > > > > > > > > > > > > > > > ret = -ENOMEM; > > > > > > > > > > > > > > > drm_err(mgr->dev, > > > > > > > > > > > > > > > "Failed > > > > > > > > > > > > > > > to > > > > > > > > > > > > > > > create MSTB for port %p", port); @@ -2366,6 > > > > > > > > > > > > > > > +2469,8 @@ > > > > > > > > > > > > > > > drm_dp_mst_add_port(struct drm_device *dev, > > > > > > > > > > > > > > > */ > > > > > > > > > > > > > > > drm_dp_mst_get_mstb_malloc(mstb); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > + init_port_topology_history(mgr, port); > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > return port; > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > @@ -3745,7 +3850,7 @@ int > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr_set_mst(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr *mgr, bool ms > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > /* add initial branch device at LCT > > > > > > > > > > > > > > > 1 */ > > > > > > > > > > > > > > > - mstb = > > > > > > > > > > > > > > > drm_dp_add_mst_branch_device(1, > > > > > > > > > > > > > > > NULL); > > > > > > > > > > > > > > > + mstb = > > > > > > > > > > > > > > > drm_dp_add_mst_branch_device(mgr, > > > > > > > > > > > > > > > 1, > > > > > > > > > > > > > > > +NULL); > > > > > > > > > > > > > > > if (mstb == NULL) { > > > > > > > > > > > > > > > ret = -ENOMEM; > > > > > > > > > > > > > > > goto out_unlock; @@ -5512,14 > > > > > > > > > > > > > > > +5617,16 > > > > > > > > > > > > > > > @@ int drm_dp_mst_topology_mgr_init(struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr *mgr, > > > > > > > > > > > > > > > mutex_init(&mgr->delayed_destroy_lock); > > > > > > > > > > > > > > > mutex_init(&mgr->up_req_lock); > > > > > > > > > > > > > > > mutex_init(&mgr->probe_lock); -#if > > > > > > > > > > > > > > > IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) > > > > > > > > > > > > > > > - mutex_init(&mgr->topology_ref_history_lock); > > > > > > > > > > > > > > > -#endif > > > > > > > > > > > > > > > INIT_LIST_HEAD(&mgr->tx_msg_downq); > > > > > > > > > > > > > > > INIT_LIST_HEAD(&mgr->destroy_port_list); > > > > > > > > > > > > > > > INIT_LIST_HEAD(&mgr- > > > > > > > > > > > > > > > > destroy_branch_device_list); > > > > > > > > > > > > > > > INIT_LIST_HEAD(&mgr->up_req_list); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +#if > > > > > > > > > > > > > > > IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) > > > > > > > > > > > > > > > + mutex_init(&mgr->topology_ref_history_lock); > > > > > > > > > > > > > > > + INIT_LIST_HEAD(&mgr- > > > > > > > > > > > > > > > >topology_ref_history_list); > > > > > > > > > > > > > > > +#endif > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > /* > > > > > > > > > > > > > > > * delayed_destroy_work will be queued on a > > > > > > > > > > > > > > > dedicated > > > > > > > > > > > > > > > WQ, so that any > > > > > > > > > > > > > > > * requeuing will be also flushed when > > > > > > > > > > > > > > > deiniting > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > topology manager. > > > > > > > > > > > > > > > diff --git > > > > > > > > > > > > > > > a/drivers/gpu/drm/nouveau/nouveau_debugfs.c > > > > > > > > > > > > > > > b/drivers/gpu/drm/nouveau/nouveau_debugfs.c > > > > > > > > > > > > > > > index 1cbe01048b93..53ec7c1daada 100644 > > > > > > > > > > > > > > > --- a/drivers/gpu/drm/nouveau/nouveau_debugfs.c > > > > > > > > > > > > > > > +++ b/drivers/gpu/drm/nouveau/nouveau_debugfs.c > > > > > > > > > > > > > > > @@ -29,9 +29,13 @@ > > > > > > > > > > > > > > > */ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > #include <linux/debugfs.h> > > > > > > > > > > > > > > > +#include <drm/drm_dp_mst_helper.h> #include > > > > > > > > > > > > > > > +<drm/drm_encoder.h> > > > > > > > > > > > > > > > #include <nvif/class.h> > > > > > > > > > > > > > > > #include <nvif/if0001.h> > > > > > > > > > > > > > > > +#include <nouveau_encoder.h> > > > > > > > > > > > > > > > #include "nouveau_debugfs.h" > > > > > > > > > > > > > > > +#include "nouveau_display.h" > > > > > > > > > > > > > > > #include "nouveau_drv.h" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > static int > > > > > > > > > > > > > > > @@ -68,6 +72,34 @@ > > > > > > > > > > > > > > > nouveau_debugfs_strap_peek(struct > > > > > > > > > > > > > > > seq_file *m, void > > > > > > > > > > > > > > > *data) > > > > > > > > > > > > > > > return 0; > > > > > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +#ifdef CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS > > > > > > > > > > > > > > > +static int > > > > > > > > > > > > > > > nouveau_debugfs_mst_topology_history(struct > > > > > > > > > > > > > > > +seq_file *m, void *data) { > > > > > > > > > > > > > > > + struct drm_info_node *node = m->private; > > > > > > > > > > > > > > > + struct drm_device *dev = node->minor->dev; > > > > > > > > > > > > > > > + struct drm_encoder *encoder; > > > > > > > > > > > > > > > + struct nouveau_display *disp = > > > > > > > > > > > > > > > nouveau_display(dev); > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + if (disp->disp.object.oclass < GF110_DISP) > > > > > > > > > > > > > > > + return -EINVAL; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + drm_for_each_encoder(encoder, dev) { > > > > > > > > > > > > > > > + struct nv50_mstm *mstm; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + /* We need the real encoder for each > > > > > > > > > > > > > > > MST > > > > > > > > > > > > > > > mgr > > > > > > > > > > > > > > > +*/ > > > > > > > > > > > > > > > + if (encoder->encoder_type != > > > > > > > > > > > > > > > +DRM_MODE_ENCODER_TMDS) > > > > > > > > > > > > > > > + continue; > > > > > > > > > > > > > > > + mstm = nouveau_encoder(encoder)- > > > > > > > > > > > > > > > > dp.mstm; > > > > > > > > > > > > > > > + if (!mstm) > > > > > > > > > > > > > > > + continue; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + seq_printf(m, "MSTM on %s:\n", > > > > > > > > > > > > > > > encoder- > > > > > > > > > > > > > > > > name); > > > > > > > > > > > > > > > + drm_dp_mst_dump_topology_refs(m, > > > > > > > > > > > > > > > &mstm- > > > > > > > > > > > > > > > > mgr); > > > > > > > > > > > > > > > + } > > > > > > > > > > > > > > > + return 0; > > > > > > > > > > > > > > > +} > > > > > > > > > > > > > > > +#endif > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > static int > > > > > > > > > > > > > > > nouveau_debugfs_pstate_get(struct seq_file *m, > > > > > > > > > > > > > > > void > > > > > > > > > > > > > > > *data) > > > > > > > > > > > > > > > { @@ > > > > > > > > > > > > > > > -213,6 > > > > > > > > > > > > > > > +245,9 @@ static const struct file_operations > > > > > > > > > > > > > > > nouveau_pstate_fops = { static struct > > > > > > > > > > > > > > > drm_info_list > > > > > > > > > > > > > > > nouveau_debugfs_list[] = { > > > > > > > > > > > > > > > { "vbios.rom", nouveau_debugfs_vbios_image, > > > > > > > > > > > > > > > 0, > > > > > > > > > > > > > > > NULL > > > > > > > > > > > > > > > }, > > > > > > > > > > > > > > > { "strap_peek", nouveau_debugfs_strap_peek, > > > > > > > > > > > > > > > 0, > > > > > > > > > > > > > > > NULL > > > > > > > > > > > > > > > }, > > > > > > > > > > > > > > > +#ifdef CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS > > > > > > > > > > > > > > > + { "dp_mst_topology_refs", > > > > > > > > > > > > > > > +nouveau_debugfs_mst_topology_history, 0, NULL }, > > > > > > > > > > > > > > > #endif > > > > > > > > > > > > > > > }; > > > > > > > > > > > > > > > #define NOUVEAU_DEBUGFS_ENTRIES > > > > > > > > > > > > > > > ARRAY_SIZE(nouveau_debugfs_list) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > diff --git a/include/drm/drm_dp_mst_helper.h > > > > > > > > > > > > > > > b/include/drm/drm_dp_mst_helper.h index > > > > > > > > > > > > > > > 78044ac5b59b..e3a73d8d97c0 > > > > > > > > > > > > > > > 100644 > > > > > > > > > > > > > > > --- a/include/drm/drm_dp_mst_helper.h > > > > > > > > > > > > > > > +++ b/include/drm/drm_dp_mst_helper.h > > > > > > > > > > > > > > > @@ -35,6 +35,11 @@ enum > > > > > > > > > > > > > > > drm_dp_mst_topology_ref_type { > > > > > > > > > > > > > > > DRM_DP_MST_TOPOLOGY_REF_PUT, > > > > > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +enum drm_dp_mst_topology_history_type { > > > > > > > > > > > > > > > + DRM_DP_MST_TOPOLOGY_HISTORY_PORT, > > > > > > > > > > > > > > > + DRM_DP_MST_TOPOLOGY_HISTORY_MSTB, }; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > struct drm_dp_mst_topology_ref_history { > > > > > > > > > > > > > > > struct drm_dp_mst_topology_ref_entry { > > > > > > > > > > > > > > > enum drm_dp_mst_topology_ref_type > > > > > > > > > > > > > > > type; > > > > > > > > > > > > > > > @@ > > > > > > > > > > > > > > > -43,6 > > > > > > > > > > > > > > > +48,9 @@ struct drm_dp_mst_topology_ref_history { > > > > > > > > > > > > > > > depot_stack_handle_t backtrace; > > > > > > > > > > > > > > > } *entries; > > > > > > > > > > > > > > > int len; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + enum drm_dp_mst_topology_history_type type; > > > > > > > > > > > > > > > + struct list_head node; > > > > > > > > > > > > > > > }; > > > > > > > > > > > > > > > #endif /* > > > > > > > > > > > > > > > IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) > > > > > > > > > > > > > > > */ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > @@ -769,6 +777,12 @@ struct > > > > > > > > > > > > > > > drm_dp_mst_topology_mgr { > > > > > > > > > > > > > > > * &drm_dp_mst_branch.topology_ref_history. > > > > > > > > > > > > > > > */ > > > > > > > > > > > > > > > struct mutex topology_ref_history_lock; > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > + /** > > > > > > > > > > > > > > > + * @topology_ref_history_list: contains a > > > > > > > > > > > > > > > list > > > > > > > > > > > > > > > of > > > > > > > > > > > > > > > +topology ref > > > > > > > > > > > > > > > histories for any MSTBs or > > > > > > > > > > > > > > > + * ports that are still in memory > > > > > > > > > > > > > > > + */ > > > > > > > > > > > > > > > + struct list_head topology_ref_history_list; > > > > > > > > > > > > > > > #endif > > > > > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > @@ -873,6 +887,10 @@ void > > > > > > > > > > > > > > > drm_dp_mst_put_port_malloc(struct > > > > > > > > > > > > > > > drm_dp_mst_port *port); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > struct drm_dp_aux > > > > > > > > > > > > > > > *drm_dp_mst_dsc_aux_for_port(struct > > > > > > > > > > > > > > > drm_dp_mst_port *port); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > +#ifdef CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS > > > > > > > > > > > > > > > +void drm_dp_mst_dump_topology_refs(struct > > > > > > > > > > > > > > > seq_file > > > > > > > > > > > > > > > *m, > > > > > > > > > > > > > > > +struct drm_dp_mst_topology_mgr *mgr); #endif > > > > > > > > > > > > > > > + > > > > > > > > > > > > > > > extern const struct drm_private_state_funcs > > > > > > > > > > > > > > > drm_dp_mst_topology_state_funcs; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > /** > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > 2.31.1 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > Cheers, > > > > > > > > > > > > > Lyude Paul (she/her) > > > > > > > > > > > > > Software Engineer at Red Hat > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > Cheers, Lyude Paul (she/her) Software Engineer at Red Hat > > > > > > > > -- > > > > > > > > Regards, > > > > > > > > Wayne Lin > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > Cheers, > > > > > > > Lyude Paul (she/her) > > > > > > > Software Engineer at Red Hat > > > > > > > > > > > > > > > > > > > > > -- > > > Cheers, > > > Lyude Paul (she/her) > > > Software Engineer at Red Hat > > > > -- > Cheers, > Lyude Paul (she/her) > Software Engineer at Red Hat -- Regards, Wayne Lin