PMFW may boots the ASIC with a different power mode from the system's real one. Notify PMFW explicitly the power mode the system in. This is needed only when ACDC switch via gpio is not supported.
Signed-off-by: Evan Quan <evan.q...@amd.com> --- drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 18 +++++++++++++++++ .../gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c | 20 +------------------ .../drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c | 1 + 3 files changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c index 5633c5797e85..2ddf5198e5c4 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c @@ -733,6 +733,24 @@ static int smu_late_init(void *handle) return ret; } + /* + * Explicitly notify PMFW the power mode the system in. Since + * the PMFW may boot the ASIC with a different mode. + * For those supporting ACDC switch via gpio, PMFW will + * handle the switch automatically. Driver involvement + * is unnecessary. + */ + if (!smu->dc_controlled_by_gpio) { + ret = smu_set_power_source(smu, + adev->pm.ac_power ? SMU_POWER_SOURCE_AC : + SMU_POWER_SOURCE_DC); + if (ret) { + dev_err(adev->dev, "Failed to switch to %s mode!\n", + adev->pm.ac_power ? "AC" : "DC"); + return ret; + } + } + if ((adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 1)) || (adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 3))) return 0; diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c index c4000518dc56..275f708db636 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c @@ -3413,26 +3413,8 @@ static int navi10_post_smu_init(struct smu_context *smu) return 0; ret = navi10_run_umc_cdr_workaround(smu); - if (ret) { + if (ret) dev_err(adev->dev, "Failed to apply umc cdr workaround!\n"); - return ret; - } - - if (!smu->dc_controlled_by_gpio) { - /* - * For Navi1X, manually switch it to AC mode as PMFW - * may boot it with DC mode. - */ - ret = smu_v11_0_set_power_source(smu, - adev->pm.ac_power ? - SMU_POWER_SOURCE_AC : - SMU_POWER_SOURCE_DC); - if (ret) { - dev_err(adev->dev, "Failed to switch to %s mode!\n", - adev->pm.ac_power ? "AC" : "DC"); - return ret; - } - } return ret; } diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c index 3d9ff46706fb..98a33f8ee209 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c @@ -1770,6 +1770,7 @@ static const struct pptable_funcs smu_v13_0_7_ppt_funcs = { .enable_mgpu_fan_boost = smu_v13_0_7_enable_mgpu_fan_boost, .get_power_limit = smu_v13_0_7_get_power_limit, .set_power_limit = smu_v13_0_set_power_limit, + .set_power_source = smu_v13_0_set_power_source, .get_power_profile_mode = smu_v13_0_7_get_power_profile_mode, .set_power_profile_mode = smu_v13_0_7_set_power_profile_mode, .set_tool_table_location = smu_v13_0_set_tool_table_location, -- 2.34.1