On 14/07/2011 19:18, Matthias Trute wrote: > > Jim, > >> I'd like to install Amforth on an Atmel Butterfly I have, and am >> currently waiting for delivery of a USBasp programmer. >> >> I anticipate using the pre-built hex files supplied with the >> distribution, loading them with 'avrdude'. > > exactly. > >> >> Are there any 'gotchas' I need to be aware of? In particular, I'm hazy >> about 'fuses' and 'lock bits' - will I need to change any of them from >> the existing butterfly default? > > I dont remember anything troublesome, it should just work. Just one > hint: do not use the fast serial settings since the butterfly does > not have a stable frequency. 9600 or even 4800 should be your choice. > It depends on your particular device. > > The address http://www.forth-ev.de/wiki/doku.php/projects:avr:atmega169 > has some more information, google translator may be helpful (the page > is in German)
Thanks for the reply Matthias. I can now go ahead with the confidence that it will work! Jim ------------------------------------------------------------------------------ AppSumo Presents a FREE Video for the SourceForge Community by Eric Ries, the creator of the Lean Startup Methodology on "Lean Startup Secrets Revealed." This video shows you how to validate your ideas, optimize your ideas and identify your business strategy. http://p.sf.net/sfu/appsumosfdev2dev _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ [email protected] https://lists.sourceforge.net/lists/listinfo/amforth-devel
