Hello, On 05/06/2012 08:12 PM, Jan Kromhout wrote: > > If I understand correctly the best is to buy some bare 328p chips, > and flash them without tatching the lock bits.
If fuses and "lock bits" refer to the same thing, then no: "bare chips" and arduino boards are different things. I personally use the following settings on arduino "duemilanove" and "uno" boards MCU=atmega328p # set the fuses according to your MCU LFUSE=0xFF HFUSE=0xD9 # some MCU have this one, see write-fuses target below EFUSE=0x05 The bare chips will run on the internal RC oszillator at 1 (or 8?) MHz, they will ignore the attached crystal, unless you correct the fuse bits. There is a "readme.txt" file in the directory appl/arduino with more information on arduinos. And just to make sure: you are aware, that flashing amforth to an arduino board does remove the arduino bootloader, are you? Cheers, Erich ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
