On 19/06/12 21:25, Alaric Snell-Pym wrote: > On 19/06/12 19:13, Matthias Trute wrote: >> Hi Alaric, >> >>> But I can't let it go without finding out what went wrong before :-) One >>> clue is that when I first tried flashing the hexes from there I got a >>> LOT of errors from avrude, about SPI problems, then a verify failure. >> >> Sounds like that you have some SPI devices (SD-Card) connected while >> programming the controller. > > The Arduino itself puts an LED on the SCK line, but isolated from it by > an op-amp buffer, so it shouldn't be a problem - I have nothing else in > parallel with it...
Having said that, I can easily pop a raw AVR chip into a breadboard and wire it up to the programmer directly, taking the Arduino board out of the equation altogether. I might try that. ABS -- Alaric Snell-Pym http://www.snell-pym.org.uk/alaric/ ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
