Hello, i am not as fast as i want, but today i could setup my Test-system with an ATMega32 developement board and AMForth. It does not run. :-( There is nothing transmitted over the RS232.
First thing i wonder about is when i convert the template.hex to a binary file: $ hex2bin template.hex hex2bin v1.0.9, Copyright (C) 2012 Jacques Pelletier checksum extensions Copyright (C) 2004 Rockwell Automation improved P.G. 2007, modified Danny Schneider,2012 Overlapped record detected Overlapped record detected Lowest address = 00000000 Highest address = 0000777F Pad Byte = FF 8-bit Checksum = 78 After that i programmed successfully the compiled hex-file with an USBASP and avrdude. I could readback the binary and compared it with the converted file (flash.xxx) It's binary identical. I attached the original files also (ATMega32.hex). I have no idea how to proceed? Best regards Karsten ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134071&iu=/4140/ostg.clktrk _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
