Hi, I need some independent tests, so I'd like to ask for volunteers.
The command prompt got its characters via a simple interrupt routine. That works quite well for years now. However some users wanted to replace this routine with some other (forth hll) code and were unpleasantly surprised that the word INT! did not do what it does for all other ISR's. Not surprisingly since that (and only that) one interrupt was not dealt with the way all other interrupts got handled. That has changed now. Now every character is processed the "standard" way and the INT! word can easily change the actions. I did some tests, but for the high speed ones I lack some resources. So I ask you to test and give feedback whether the new code works for serial line speed like 56k (or more) - my boards don't have the necessary baud rate clock quartzes... Please get the sources from the repository trunk after version 2141 and recompile them. To check if everything works good enough, it is sufficient that you can enter commands at all.... The MSP430 is a different story, they still lack interrupts completely. Thanks in advance Matthias ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.http://sdm.link/zohodev2dev _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
