Thanks Erich,

Do I need this to start every time I use I2C  

i2c.init.default

Cheers,

Jan

> Op 9 nov. 2018, om 20:56 heeft Erich Wälde <ew.fo...@nassur.net> het volgende 
> geschreven:
> 
> Hello Jan,
> 
> your i2c address: "$38", is this the 7bit address? You might
> need to shift it by one position to "$70".
> 
> Just an idea.
> Cheers,
> Erich
> 
> Jan Kromhout writes:
> 
>> Hi,
>> 
>> This is my first step on the I2C road.
>> I have a Gravitech shield for the Arduino, that work well.
>> The code is very simple, and I have translate it to Forth.
>> The display is not working.
>> I include the Forth code. What is wrong?
>> Thangs for any help.
>> 
>> Cheers,
>> 
>> Jan
>> 
>> \ Gravitech display, I2C Generic
>> 
>> marker --gravitech--
>> 
>> $38 constant 7SEG  \ I2C address for 7-Segment
>> 
>> / Configure 7-Segment to 12mA segment output current, Dynamic mode,
>> / and Digits 1, 2, 3 AND 4 are NOT blanked
>> 
>> : init7SEG
>>  7SEG i2c.begin
>>    0 7SEG i2c.c!
>>    %01000111 7SEG i2c.c!
>>  i2c.end
>> ;
>> 
>> : Send7SEG  ( Digit Number )
>>  7SEG i2c.begin
>>    swap 7SEG i2c.c! \ Digit
>>    7SEG i2c.c!      \ Number
>>  i2c.end
>> ;
>> 
>> 
>> /* Configure 7-Segment to 12mA segment output current, Dynamic mode,
>>     and Digits 1, 2, 3 AND 4 are NOT blanked */
>> 
>>  Wire.beginTransmission(_7SEG);
>>  Wire.write(0);
>>  Wire.write(B01000111);
>>  Wire.endTransmission();
>> 
>> 
>> /***************************************************************************
>> Function Name: Send7SEG
>> 
>> Purpose:
>>   Send I2C commands to drive 7-segment display.
>> ****************************************************************************/
>> 
>> void Send7SEG (byte Digit, byte Number)
>> {
>>  Wire.beginTransmission(_7SEG);
>>  Wire.write(Digit);
>>  Wire.write(Number);
>>  Wire.endTransmission();
>> }
>> 
>> 
>> _______________________________________________
>> Amforth-devel mailing list for http://amforth.sf.net/
>> Amforth-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/amforth-devel
> 
> 
> -- 
> May the Forth be with you ...
> 
> 
> _______________________________________________
> Amforth-devel mailing list for http://amforth.sf.net/
> Amforth-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/amforth-devel


_______________________________________________
Amforth-devel mailing list for http://amforth.sf.net/
Amforth-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/amforth-devel

Reply via email to