Tristian, Thank, I will start soon to explore this version. Let you know my findings.
With kindly regars, Jan Verstuurd vanaf mijn iPad > Op 16 feb. 2019 om 21:27 heeft Tristan Williams <h...@tjnw.co.uk> het > volgende geschreven: > > Jan, > > My prebuilt hex files for the ARDUINO MEGA 2560 are linked below > > https://www.mostlymostly.uk/post/2019.02.16/ > > Hope this helps and interested to hear how you get on. > > Best wishes, > Tristan > > > >> On 15Feb19 16:47, Jan Kromhout via Amforth-devel wrote: >> Tristan, >> >> First thanks for the quick response. >> Yes I found out the hex file wasn’t working after flashing to the Mega. >> My flasher is from Pololu and is working great on my macbook pro and avrdude. >> >> Is there an possibility to get the hex files from you? >> I’m not a star in compiling this kind of things without a good portion of >> help. >> >> My email is krom1109 at hotmail dot com >> >> With kindly regards, >> >> Jan >> >> >> >>> Op 15 feb. 2019, om 16:38 heeft Tristan Williams <h...@tjnw.co.uk> het >>> volgende geschreven: >>> >>> Jan, >>> >>> A number of things. >>> >>> The hex file you have found may not be one for the Arduino >>> Mega2560. If I remember correctly, the distribution has an appl folder >>> for the atmega2561 and the configuration assembler file >>> >>> https://sourceforge.net/p/amforth/code/HEAD/tree/trunk/appl/atmega2561/atmega256.asm >>> >>> suggests that it was built for an ATmega2561 with an 14.745600MHz crystal >>> and uart1 >>> hosting the AmForth interpreter. >>> >>> I adjusted the AmForth make system (on OSX) to build a custom hex file >>> for the Arduino Mega2560 which uses ATmega2560 chip and a 16MHz >>> crystal. I also put the AmForth interpreter on uart0. The AmForth >>> build system is one of its many strengths, though getting it to work >>> on OS X does require a few extra steps. >>> >>> I used these fuse values for my Arduino Mega2560 >>> >>>> avrdude: safemode: Fuses OK (E:FF, H:99, L:CE) >>> >>> Finally, what hex programmer you use may be important with the Mega2560. I >>> used an avrisp2 compatible programmer and had no problems. However, I can >>> confirm that my usbtiny programmer couldn't program my Mega2560 >>> successfully. >>> >>> Best wishes, >>> Tristan >>> >>> >>> >>> >>> >>> >>> >>> >>>> On 15Feb19 14:20, Jan Kromhout wrote: >>>> Tristan, >>>> >>>> Found the hex files for the Mega, but don’t found the fuse values. >>>> Please can you help me out with these. >>>> >>>> Cheers, >>>> >>>> Jan >>>> >>>> >>>> >>>>> Op 15 feb. 2019, om 13:21 heeft Jan Kromhout <krom1...@hotmail.com> het >>>>> volgende geschreven: >>>>> >>>>> Tristan, >>>>> >>>>> Thank. Where to find the hex files for the mega, and what fuse settings >>>>> you have used. >>>>> I wont to play with it this evening. Verry exciting how it works. >>>>> Cheers, >>>>> >>>>> Jan >>>>> >>>>> Verstuurd vanaf mijn iPad >>>>> >>>>>> Op 15 feb. 2019 om 12:45 heeft Tristan Williams <h...@tjnw.co.uk> het >>>>>> volgende geschreven: >>>>>> >>>>>> Jan, >>>>>> >>>>>> There is a link "source" in the text, but below is the url from the >>>>>> link. >>>>>> >>>>>> https://www.mostlymostly.uk/files/source/uart1.forth >>>>>> >>>>>> Tristan >>>>>> >>>>>> >>>>>>> On 15Feb19 11:15, Jan Kromhout via Amforth-devel wrote: >>>>>>> Hi Tristan, >>>>>>> >>>>>>> How can I acces the source, the link shows only an overview! >>>>>>> >>>>>>> Cheers, >>>>>>> >>>>>>> Jan >>>>>>> >>>>>>> Verstuurd vanaf mijn iPad >>>>>>> >>>>>>>> Op 15 feb. 2019 om 09:21 heeft Tristan Williams <h...@tjnw.co.uk> het >>>>>>>> volgende geschreven: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> I've linked (below) some AmForth words I've written to help me use the >>>>>>>> second hardware serial port on an AVR atmega mcu, should there be one. >>>>>>>> >>>>>>>> https://www.mostlymostly.uk/post/2019.02.01/ >>>>>>>> >>>>>>>> >>>>>>>> Tristan >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Amforth-devel mailing list for http://amforth.sf.net/ >>>>>>>> Amforth-devel@lists.sourceforge.net >>>>>>>> https://lists.sourceforge.net/lists/listinfo/amforth-devel >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Amforth-devel mailing list for http://amforth.sf.net/ >>>>>>> Amforth-devel@lists.sourceforge.net >>>>>>> https://lists.sourceforge.net/lists/listinfo/amforth-devel >>>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Amforth-devel mailing list for http://amforth.sf.net/ >>>>>> Amforth-devel@lists.sourceforge.net >>>>>> https://lists.sourceforge.net/lists/listinfo/amforth-devel >>>>> >>>>> >>>>> _______________________________________________ >>>>> Amforth-devel mailing list for http://amforth.sf.net/ >>>>> Amforth-devel@lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/amforth-devel >>>> >>>> >>>> _______________________________________________ >>>> Amforth-devel mailing list for http://amforth.sf.net/ >>>> Amforth-devel@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/amforth-devel >>> >>> >>> _______________________________________________ >>> Amforth-devel mailing list for http://amforth.sf.net/ >>> Amforth-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/amforth-devel >> >> >> >> _______________________________________________ >> Amforth-devel mailing list for http://amforth.sf.net/ >> Amforth-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/amforth-devel > > > _______________________________________________ > Amforth-devel mailing list for http://amforth.sf.net/ > Amforth-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/amforth-devel _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
