Hello Bruce Thank you for this information.
But … could it be possible to use the primitives of the 1-wire protocol in order to start/trigger a measure sequence and to read a series of bits/bytes as a result of the measurement? Fred > Op 20 mrt. 2019, om 18:26 heeft CV Bruce <cvbr...@gmail.com> het volgende > geschreven: > > Hi, > > Although a DHT-11 or 22 has one wire, it doesn’t speak the 1-wire protocol, > so it isn’t a 1-wire device. > > Bruce >> Message: 1 >> Date: Wed, 20 Mar 2019 13:21:46 +0100 >> From: Fred Zelders <fzeld...@gmail.com> >> To: AmForth Community <amforth-devel@lists.sourceforge.net> >> Subject: [Amforth] 1-wire communication with DHT-11 connected to >> Arduino Uno's PB4 >> Message-ID: <56b2aad2-18c0-4e1c-bca4-476576a9b...@gmail.com> >> Content-Type: text/plain; charset=utf-8 >> >> Using 1wire.frt I want to communicate with the DHT-11 that is used on the >> 'Open-Smart Rich Shield' and connected to pin PB4 (D12) of the Uno. >> (https://www.aliexpress.com/item/Rich-Shield-IR-Remote-with-Infrared-Receiver-LED-Buzzer-Button-Light-Sensor-Temperature-Sensor-24C02-EEPROM/32843115907.html) >> >> How can I define port PB4 as the pin that is used to 1-wire interface with >> the DHT-11? >> >> Any help much appreciated! >> [Al vast dank! ? ] >> >> >> Fred Zelders >> > > > > _______________________________________________ > Amforth-devel mailing list for http://amforth.sf.net/ > Amforth-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/amforth-devel _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
