That probably is due to the fact that I set some filters within the code. Check the line Filter= and set it to what you want. Read the code.
Donald F Lindberg _____ From: amibroker@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Rasheed Momoh Sent: Friday, November 09, 2007 6:53 PM To: amibroker@yahoogroups.com Cc: [EMAIL PROTECTED] Subject: RE: [amibroker] graham Kavanagh Support and resistance levels using RSI. hi just wanted to confirm 1 when i run the code and click explore. it does not pick the support resistance of all the stocks. out of 205 stocks it only shows 45. kindly assist --- On Tue, 11/6/07, Rasheed Momoh wrote: From: Rasheed Momoh Subject: RE: [amibroker] graham Kavanagh Support and resistance levels using RSI. To: amibroker@yahoogroups.com Cc: [EMAIL PROTECTED] Date: Tuesday, November 6, 2007, 3:14 PM I have sent an attachment to show u want the support resistance figures r generating. for example UAC-PROP on the chart is showing a range of 19-21. the formula you sent me is showing 42.81-37.73. pls what do i do. abdulrasheed --- On Tue, 11/6/07, Don Lindberg wrote: From: Don Lindberg Subject: RE: [amibroker] graham Kavanagh Support and resistance levels using RSI. To: [EMAIL PROTECTED] ps.com Date: Tuesday, November 6, 2007, 2:19 PM I have put in basic code to allow you to run as exploration. You can narrow your search by changing the criteria in the Filter Statement. ------------ --------- ------ Begin Code ------------ --------- --- _SECTION_BEGIN("support and resistant"); //Support and resistance levels using RSI. //graham Kavanagh May 2003 //Load into Indicator Builder //Sensitivity of the levels can be changed with the variables //Can test different numbers live with the Param function ctrl-R with Open pane RSIperiod = 5; // Param("RSI p",3,14,30,1) ; Percent = 5; // Param("ZIG %",8,9,15,1) ; EMAperiod = 5; //Param("EMA p",4,5,10,1) ; HHVperiod = 5; //Param("HHV p",3,5,10,1) ; NumLine = 1; //Param("Num Lines",3,1,20, 1); Base = DEMA(RSI(RSIperiod), EMAperiod) ; GraphXSpace=0.5; Plot(C,"",colorBlack,styleCandle); for( i = 1; i = numline; i++ ) { ResBase = LastValue(Peak(Base,Percent, i)); SupBase = LastValue(Trough(Base,Percent, i)); Plot(ValueWhen( ResBase==Base, HHV(H,HHVperiod) ), "Resist Level", colorRed, styleLine); Plot(ValueWhen( supbase==Base, LLV(L,HHVperiod) ), "Support Level", colorGreen, styleLine); } Title = Name() + "; " + Date() + ": Support Resistance Levels using RSI: " + /*EncodeColor( colorGreen) + "Support Levels are Green; "+EncodeColor( colorRed) + "Resistance Levels are Red: "+EncodeColor( colorBlack) +*/ "Num lines ="+WriteVal(numline, 1) ; Filter=C>10 AND C75 AND ResBase>=1 AND SupBase >=1; Buy=Sell=Short=Cover=0; AddColumn(C,"Close",1.2); AddColumn(ResBase,"Resistance",1.2); AddColumn(SupBase,"Support",1.2); _SECTION_END(); ------------ --------- ---- End Code ------------ --------- Donald F Lindberg _____ From: [EMAIL PROTECTED] ps.com [mailto: [EMAIL PROTECTED] ps.com ] On Behalf Of rashmo_70 Sent: Tuesday, November 06, 2007 1:16 PM To: [EMAIL PROTECTED] ps.com Subject: [amibroker] graham Kavanagh Support and resistance levels using RSI. Please is it possible to do a scan on the formula below to generate support resistance prices other than browsing each chart?. thanks. _SECTION_BEGIN( "support and resistant"); //Support and resistance levels using RSI. //graham Kavanagh May 2003 //Load into Indicator Builder //Sensitivity of the levels can be changed with the variables //Can test different numbers live with the Param function ctrl-R with open pane RSIperiod = 5; // Param("RSI p",3,14,30,1) ; Percent = 5; // Param("ZIG %",8,9,15,1) ; EMAperiod = 5; //Param("EMA p",4,5,10,1) ; HHVperiod = 5; //Param("HHV p",3,5,10,1) ; NumLine = 1; //Param("Num Lines",3,1,20, 1); Base = DEMA(RSI(RSIperiod) ,EMAperiod) ; GraphXSpace= 0.5; Plot(C,"",colorBlac k,styleCandle) ; for( i = 1; i = numline; i++ ) { ResBase = LastValue(Peak( Base,Percent, i)); SupBase = LastValue(Trough( Base,Percent, i)); Plot(ValueWhen( ResBase==Base, HHV(H,HHVperiod) ), "Resist Level", colorRed, styleLine); Plot(ValueWhen( supbase==Base, LLV(L,HHVperiod) ), "Support Level", colorGreen, styleLine); } Title = Name() + "; " + Date() + ": Support Resistance Levels using RSI: " + /*EncodeColor( colorGreen) + "Support Levels are Green; "+EncodeColor( colorRed) + "Resistance Levels are Red: "+EncodeColor( colorBlack) +*/ "Num lines ="+WriteVal( numline,1) ; _SECTION_END( ); ____________ _________ _________ _________ _________ __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail. yahoo.com __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com