Hi Joseph - looks like TJ has answered your questions and perhaps I touched on 
the answers in my other e-mails. Let me know if you still have a question!

Steve
  ----- Original Message ----- 
  From: Tomasz Janeczko 
  To: [email protected] 
  Sent: Friday, May 23, 2008 5:20 AM
  Subject: Re: [amibroker] Quad-core test results


  1. FWIW: You can run as many instances as you wish, even 100. As long as you 
don't update anything it will be just fine.
  But if you start saving any data the "last" write counts.

  2. Machine should never grind to a halt with 50% CPU utilisation on dual 
core. If it does it means that it is SWAPPING excessively (then system locks 
the machine).
  Excessive swapping usually means that your config is not correct.

  Best regards,
  Tomasz Janeczko
  amibroker.com
    ----- Original Message ----- 
    From: J. Biran 
    To: [email protected] 
    Sent: Friday, May 23, 2008 10:13 AM
    Subject: RE: [amibroker] Quad-core test results


    I am a bit confused: 

     

    1.

    You were able to run multiple instances of AB all using same database on 
one machine? I thought that is not possible.

     

    2.

    25% CPU utilization on a quad core CPU means 1 core is fully occupied etc. 
i.e. on my dual core AMD CPU AB never consumes more than 50%. If utilization is 
stuck at 50% the machine grinds to a halt.

     

    3.

    If the application itself cannot utilize multiple cores (I believe few 
exist now), the maximum "utilization" you could get from a quad core CPU should 
be 25% of the theoretical total computing power. Am I missing something?



    Joseph Biran
    ____________________________________________

    From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of 
Steve Dugas
    Sent: Thursday, May 22, 2008 5:50 PM
    To: Yahoo - AmiBroker
    Subject: [amibroker] Quad-core test results

     

    Hi All,

     

    I finished setting up the new quad-core machine and ran my first tests 
today, so am posting the promised test results. All I can say is Wow!  Really 
nice improvements, even better than I expected to see in my highest hopes. I am 
happy as a pig in sh*t !!     8 - )

     

    For background, the test was an optimization run on a single ticker, which 
is how I will be running all my other tests ( ticker was QID, 468 EOD data bars 
). All tests used the same code with different param settings, all tests had 
about 46,000 opt steps.

     

    To put things in perspective and show why I am so happy, the original code 
was about 2,400 lines. The first time I ran it, on my old backup computer which 
I was using as a dedicated optimization machine, it took 7 1/2 hours to run. So 
then I copied the code and created a shorter version, removing everything which 
wasn't absolutley necessary for the optimizer, and that reduced the run time to 
2 1/2 hours. Then I ran this short version on my faster primary machine and 
that took 1 1/4 hours, which is about what I was expecting to see on the new 
machine.

     

    So today I started by running just ran one instance on the quad-core - that 
took only 30 mins and Task Manager showed it was using just 25% of the total 
processing power!  Well to make a long story short, I kept adding one instance 
at a time, all instances ran in 30 mins and each used up an additional 25% of 
the CPU power. In the end, I was easily running 4 simultaneous instances. This 
pretty much kept the CPU tached at 100% but all instances ran fine, all 
finished in 30 mins and I didn't experience any problems at all. I was even 
saving the first ones to spreadsheets while the final ones were still 
finishing, wow everything just worked flawlessly!  So, the quad-core can run 4 
seperate opts simultaneously in 30 mins, which averages out to 7 1/2 minutes 
per opt, which = 

     

    10X improvement over running the short code on the fast machine...

    20X improvement over running the short code on the old dedicated 
optimization machine...

    60X improvement over running the original code on the old optimization 
machine...  Awesome !!!

     

    To those who were wondering what is the best machine to get for running AB, 
it looks to me like quad is the way to go.  ( My machine has an Intel 
processor, which TJ mentioned should probably work better than AMD for this 
stuff )....

     

    Steve

   

Reply via email to